Latest activity
-
elenohaic reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with
Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64... -
Bbeerbeedi replied to the thread VxLAN Between PVE Servers and Local Egress Configuration.I actually have this exact same setup (SD-WAN via UniFi Site Magic and a 2-node Proxmox cluster spread across two different sites). I used to run EVPN with dynamic routing and VXLAN to handle a stretched vnet with single gateway, but...
-
UdoB reacted to Bu66as's post in the thread Problem mit VPN Container als Gateway für einen anderen Container with Like.
Bevor du dich mit DNAT rumschlägst: aus welchem Netz greifst du denn zu? Wenn dein PC im selben Subnetz hängt wie der Nodecast-Container, ist das Gateway für diesen Zugriff völlig egal, die beiden reden direkt über die Bridge miteinander. Dass es... -
VictorSTS reacted to mfederanko's post in the thread In Proxmox 9.2.3 what is this UI checkbox for? with Like.
host-managed=0 should be the closest equivalent to PVE8 behavior, though PVE9 does include logic to auto-detect if the host or guest should configure the network and it is usually not necessary to specify it. Specifically, it checks the existence... -
G_gabriel replied to the thread [SOLVED] after upgrade to PVE9 one Node stuck on Loading initial ramdisk.Have checked if available over network ? even if console stuck to "Loading initial ramdisk"
-
dcsapak reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64... -
Uudo posted the thread [SOLVED] after upgrade to PVE9 one Node stuck on Loading initial ramdisk in Proxmox VE: Installation and configuration.My fault! There was still an "root=ZFS=rpool/ROOT/pve-1 boot=zfs" in the default-grub file due an prior installation on other Hardware without boss-card. Hi, this mornig I've upgrade 3 Nodes of an Cluster to proxmox-ve: 9.2.0 (running kernel...
-
dakralex reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64... -
DamienDye replied to the thread Migration from DELL VxRail to Proxmox.Yes this is possible and we have been providing assistance as a partner. if you want to reach out to us the site is in my bio. -
HHristoY reacted to Alwin Antreich's post in the thread Hello, I need to change the IP of one host for corosync network link0. with Like.
A small adaption to this. With PVE 9.2 you can disarm HA [0] which closes all watchdogs, the resource.cfg move is not needed anymore. [0] https://pve.proxmox.com/pve-docs/pve-admin-guide.html#ha_manager_disarm
-
HHristoY reacted to JohnnieKF's post in the thread Hello, I need to change the IP of one host for corosync network link0. with Like.
That's great — just to confirm, can you ping the other hosts from each VLAN? Assuming they're all communicating, they should be able to sync a new version of the Corosync config between the hosts [0]. If you update ring0_addr for Host 1 and...
-
Cchristophe reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
MMeisterPetz reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
VictorSTS reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
MMarkusKo reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
IInZaneDanii posted the thread [SOLVED] Mixed CPU Cluster, mit Custom CPU Models möglich? in Proxmox VE (Deutsch/German).Hallo, Wir haben derzeit 3x PVE Server mit dual Socket Intel(R) Xeon(R) Gold 6442Y. Wir überlegen derzeit, ob wir unseren PVE Cluster mit mehreren Hosts weitern sollen. (Uns gehen langsam die Ressourcen für HA aus). Da die Hardware Preise...
-
DamienDye reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
Ssantiagobiali reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
JHi, thank you very much for reporting this new tool. I have always waited for a tool like this. Unfortunately, this tool is only running on Windows for what ever reason... -> I can't use it then, because we are not using Windows at all in our...
-
JJohannes S reacted to Bu66as's post in the thread Problem mit VPN Container als Gateway für einen anderen Container with Like.
Bevor du dich mit DNAT rumschlägst: aus welchem Netz greifst du denn zu? Wenn dein PC im selben Subnetz hängt wie der Nodecast-Container, ist das Gateway für diesen Zugriff völlig egal, die beiden reden direkt über die Bridge miteinander. Dass es...