Latest activity
-
Ssquebel reacted to sakrizz's post in the thread VM becomes unresponsive during Veeam backup with
Like.
Veeam B&R 13.1.0.411 release dropped just yesterday / today -> Installed it and already tried out this as now we are on supported version. Issue is still the same, but luckily we now get the product support and Veeam has to investigate this... -
HHristoY posted the thread Hello, I need to change the IP of one host for corosync network link0. in Proxmox VE: Networking and Firewall.Hello, I have cluster with 5 nodes and one of them (Host1) has ip adress of the management network (10.100.250.x) instead of the corosync (10.100.252.x) network. How to modify it without any cluster or VM downtime: Proxmox version 9.2.4 for all...
-
-
shanv replied to the thread adding remote to PDM after deleting the same remote via CLI in /etc/proxmox-datacenter-manager/remotes.cfg :-(Resolved).Glad it worked. Could you please mark this thread as resolved? -
LnxBil replied to the thread [TUTORIAL] Using a TCP/Telnet Serial Console for Proxmox VMs.It should just work like that. PVE will create a socket on the filesystem with a predicatble name you can interact with. Just plug nc in there and you will have a network socket. Without any edit on the VM config side. You can also just use... -
Llanepark5033 replied to the thread adding remote to PDM after deleting the same remote via CLI in /etc/proxmox-datacenter-manager/remotes.cfg :-(Resolved).Using the gui connection of the problem pve I want to Datacenter/permissions/api tokens of the problem pve and deleted the old token causing the error and all is well. Thanks for the input.
-
Llonger replied to the thread [TUTORIAL] Using a TCP/Telnet Serial Console for Proxmox VMs.Thanks for the input, you are completely right that a raw socket is not a Telnet server, and that it can be accessed via nc or socat. I will edit it with that. The reason for doing this is i encountered for specific external automation and...
-
Francois Baillargeon reacted to DamienDye's post in the thread VMware OVA Appliances on Proxmox ! with Like.
you can also use the vmware pvscsi option to emulate there scsi controller to so the VM should not know its running on KVM in proxmox rather than VMware -
Iinfraerik posted the thread backup connect failed: command error: failed to set owner on s3 backend in Proxmox Backup: Installation and configuration.I just setup a fresh install of PBS, following the documentation as best I understood it. I setup two datastores - one local directory and one S3. Running the backups I keep seeing the following errors on certain VMs: ERROR: Backup of VM 102...
-
Ddbrega replied to the thread no ssh and GUI access.When you say that, are you referring to this correction? Below you can see screenshots of the configuration and execution of the accepted bash command Now is ok? After this, do I need to generate some more log files to check whether the system...
-
-
Ffranko5 reacted to t.lamprecht's post in the thread [SOLVED] Problem permission /etc/pve/nodes with Like.
So did you executed pvecem delnode <oldnode> after you removed the node? If not gain temporary quorum with pvecm expected 1 pvecm delnode old-node-name If you have done this and it does not work please post output from pvecm status
-
LnxBil replied to the thread [TUTORIAL] Using a TCP/Telnet Serial Console for Proxmox VMs.Although everything is correct, why would you prefer the manual way over the UI way of configuring it? The UI way has already nice integration into the UI for the console to open the serial console in a browser windows. Accessing it over an...
-
JohnnieKF replied to the thread Clocksource error when live migrating VM.Since you haven't measured anything yet, I'd confirm there's a real problem before chasing the message. In the guest, run this before a migration and again straight after: chronyc tracking Watch System time and Last offset. If both stay small... -
Kkagerito replied to the thread Clocksource error when live migrating VM.Chrony is running on both hosts and the guest. I have not done any measuring, only looked at the message and log entry.
-
Ddbrega replied to the thread no ssh and GUI access.This isn’t possible because I’m connecting remotely to a network that I don’t manage, and I’d like to avoid losing control of the PVEs entirely. I have attached the files generated by each of the suggested commands
-
LLoM+OeF replied to the thread PMG 9.1 + SSL Zertifikate.Danke !
-
Ppme242 replied to the thread PBS cannot restore large disk from S3.Thanks for the advice, but in my opinion the restore should work seemless like the backup and doesn't requieres additional setup.
-
news reacted to waltar's post in the thread PBS 3.4.8 datastore corruption causing backup failures with "Structure needs cleaning (os error 117)" and restore CRC checksum errors with Like.
I would strongly take a look onto your disks and raid system under the xfs as cannot write or read chunks are followon errors to xfs and even then to pbs. -
news reacted to Chris's post in the thread PBS 3.4.8 datastore corruption causing backup failures with "Structure needs cleaning (os error 117)" and restore CRC checksum errors with Like.
The error points towards a filesystem corruption, the causes thereof might be manifold. I would rather recommend to put your PBS datastore into maintenance mode offline and create a full disk clone to another storage medium via some dedicated...
-
JohnnieKF replied to the thread Clocksource error when live migrating VM.Before digging into the TSC side of this, a couple of questions, because the fix is quite different depending on the answers: Is chronyd currently running inside the guest, or are you only syncing time on the hosts? Have you actually measured...
-
OOnslow reacted to Chris's post in the thread PBS 3.4.8 datastore corruption causing backup failures with "Structure needs cleaning (os error 117)" and restore CRC checksum errors with Like.
The error points towards a filesystem corruption, the causes thereof might be manifold. I would rather recommend to put your PBS datastore into maintenance mode offline and create a full disk clone to another storage medium via some dedicated...
