Latest activity

  • gyptazy
    One thing I would consider is the availability of support. While the Proxmox Datacenter Manager (despite it's still limited feature set compared to vcenter) is covered by Proxmox support beginning with basic subscription level I'm not aware of...
  • LnxBil
    Best advice is to not use it and don't change anything on your hypervisor. If you fear ssd wearout, just buy small and used enterprise SSDs. The amount of time you have to put in to get it to work is much, much more than just buying the SSDs.
  • fireon
    fireon replied to the thread NVME LVMcache w/ LVM Thin?.
    You say that you're using LVM-Thin, so I'm assuming you're using a hardware RAID? Then you'd need to check what your hardware RAID controller is capable of and whether it can add an explicit cache. If you can or want to use ZFS, is there an...
  • LnxBil
    You're totally right with your assessment about the PVE subscription cost per socket as the only cost you have. It's open source, so you could also run everything without any licensing/subscription cost and of course then without any support. I...
  • B
    Ich hab mir die Mountpoint-Config (mp0 SamsungSSD:vm-101-disk-0) und den Rest vom Thread angeschaut. Hier erkläre ich, warum der Platz nicht freigegeben wird und wie pct fstrim von @Impact das löst: Das mit dem nicht-schrumpfenden Platz ist...
  • P
    Hi, seems like this issue is still open. We are using S3 on idrive-e2. No chance to restore / verify if the vm size is 300GB. We've tried multiple rate in limits (100 / 50 MiB/s) - still no luck. ... progress 24% (read 64428703744 bytes...
  • D
    Hallo, an meinem HP DL380 Gen 10 habe ich eine defekte SAS Festplatte getauscht. Die neue wird im ILO sauber angezeigt, im ZFS steht beim Datapool degraded und bei der Festplatte Removed. Das letzte mal wurde direkt im ZFS --> status eine nicht...
  • B
    Bu66as reacted to DocZoid's post in the thread [SOLVED] VLANS richtig einrichten with Like Like.
    Ich möchte noch was zu dem Thema ergänzen, was ich nach etlichen Stunden Suche erst gefunden habe. Proxmox lief zunächst in einem Netzwerk ohne VLANs, erst später habe ich OPNSense auf eine VM installiert, Dabei war vmbr1 zunächst noch nicht VLAN...
  • R
    Hello Proxmox Team, We are currently evaluating Proxmox VE with Ceph as part of a large-scale virtualization assessment and would appreciate some clarification from the community regarding licensing and operational costs. From my understanding...
  • Z
    zegorax replied to the thread pct list endless.
    I got the problem again this morning. There are no processes in the "D" state currently. I had to reboot the host to regain any control on the PCT containers. Unfortunately, no useful logs are present in dmesg. Does anyone have an idea of what's...
  • hloudes
    hloudes reacted to fabian's post in the thread How to configure DSCP ? with Like Like.
    Just for the avoidance of doubt as the person who answered you over on GH - I am not one of corosync developers (just an occasional contributor) :)
  • B
    Wie so oft: Das kommt darauf an. VLANs kannst du ja auch geschachtelt betreiben (QinQ) und dann ergibt die Einstellung hier Sinn. Kommt halt immer darauf an was man erwartet und was nicht. Ich finde es toll, dass es so ist wie es ist. Schöner...
  • UdoB
    UdoB reacted to Johannes S's post in the thread Containers on GlusterFS? with Like Like.
    PVE8 doesn't get any security and other bug fixes anymore, see: https://forum.proxmox.com/threads/proxmox-ve-support-lifecycle.35755/ So you need to upgrade to PVE9 as soon as possible to continue getting security and other upgrades and then you...
  • UdoB
    UdoB replied to the thread no ssh and GUI access.
    Triple check if there is an IP address conflict. If some other device grabs that IP address - or it is assigned by a DHCP server - then these effects are normal. It also is normal, that Containers and/or VMs are not affected... PVE should have...
  • M
    Deine Beobachtung mit der X722 ist eigentlich schon die halbe Miete. Das Ding hängt am i40e-Treiber und der reserviert pro Queue ordentlich Speicher fürs RX/TX-Ring bzw. Page-Pool, und die Queue-Anzahl skaliert mit den CPU-Cores. Bei 8 Cores und...
  • J
    Cool, als dauerhaftes WAN-Backup-Interface hätte ich so nen USB-Stick gar nicht auf dem Schirm gehabt, aber warum nicht. Wichtig wenn der 24/7 läuft: USB-Autosuspend beachten, sonst legt der Kernel den Adapter bei wenig Traffic schlafen und die...
  • D
    dbrega replied to the thread no ssh and GUI access.
    Let me try to be clearer, then. I have no problem restarting the PVE host by forcing it to shut down using the power button and then switching it back on. At the moment, this is the only way I can do it, unless I can send a command from an LXC...
  • B
    Cool, als dauerhaftes WAN-Backup-Interface hätte ich so nen USB-Stick gar nicht auf dem Schirm gehabt, aber warum nicht. Wichtig wenn der 24/7 läuft: USB-Autosuspend beachten, sonst legt der Kernel den Adapter bei wenig Traffic schlafen und die...
  • F
    Frank-75 replied to the thread VM Migration error.
    If so, it would have been better to know in advance that LVM is worse for my purpose. In all the posts I read, users have configurations with LVM datastores, not Directory.
  • aaron
    The KRBD setting in the storage config only affects how VMs access their virtual disks on RBD. For CTs it will always be the kernel variant where rbdmap is run, to map an RBD image to a local block dev.