Latest activity
-
DVielen Dank an alle, die mir beratend unter die Arme gegriffen haben. Ich habe mit dem Ventoy Stick die aktuellste Version 9.2.2 installiert und meine Backups wieder zurückgespielt. Und alles läuft. Allein die Tatsache, dass es so etwas wie...
-
news replied to the thread [SOLVED] How can I get my storage data back?.Please see: https://pve.proxmox.com/pve-docs/chapter-pvesm.html Please post the old contend of /etc/pve/storage.cfg -
Ddaanw replied to the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation?.From my experience, even the old ZFS dedup was doable as long as you had a nvme special vdev included. The dedup memory myth is pretty much like the general ZFS memory myth. Adding that special vdev definitely had more impact than adding more...
-
AAlexanderB posted the thread [SOLVED] PBS - Correct and simple VLAN settings in Proxmox Backup: Installation and configuration.Dear community, i´m struggeling quite alot with the correct configuration of vlan, after the installation. After the installation I have to edit "/etc/network/interfaces" to get that bare metal server to be on VLAN9. But it seems it does not...
-
BBigBulb replied to the thread [SOLVED] How can I get my storage data back?.No, I only have one pair of HDDs that I was using to store media files and they're 4TB. I saved backups on flash drives and the PVE system is on a SSD that I use for system stuff and ISO images I don't understand
-
news replied to the thread [SOLVED] How can I get my storage data back?.I don*t understand: a) you use raid1 on 2x HDD with what file- and Raid-Ssystem, mdadm, ext4, xfs? b) And you have a other 4 TB HDD? c) Where are your backup are saved? Can you tell us that? d) on with device where and is now your Proxmox VE...
-
WThere also exists the "First Guest Boot Delay": https://pve.proxmox.com/pve-docs/chapter-sysadmin.html#first_guest_boot_delay
-
WRoot cause is that when PVE tries to autostart VMs early in boot, the network stack isn't fully up yet, and QEMU fails to bind the SPICE socket on 127.0.0.1. getaddrinfo() returns "address family not supported" because loopback isn't ready...
-
G_gabriel replied to the thread IPv6 DHCP in LXC.What distrib LXC used ? What about cat /proc/sys/net/ipv6/conf/eth0/accept_ra ?
-
BBigBulb posted the thread [SOLVED] How can I get my storage data back? in Proxmox VE: Installation and configuration.I had my Proxmox machine use a pair of HDDs in RAID1 to use for storing media files and it was set up as storage for Proxmox so my containers could use it. I had 4TB to use for storing media and I would have a container mount that drive. I wanted...
-
JJ-Rod replied to the thread [Community project] Proximo — an open-source, least-privilege MCP/API layer for managing PVE with an AI agent (feedback wanted)."prefer to see real tests on a real system with the author's data"? Who writes like that normally? Also, stating that you want to see such a thing is literally criticizing this project! So DeQuzzie seems suspiciously like another account...
-
TTErxleben replied to the thread [LXC Problematik] Promox Virtual Environment 9.2.5 - LXC Container - Probleme nach Update oder Fehlbedienung.An dir wird es nicht liegen. Ich habe jahrelang versucht, Container extensiv auf dem Desktop zu verwenden. Das einzige, was verlässlich war, war die Tatsache, dass man bei jedem seltenen Start eines Containers immer fummeln musste, bevor er lief...
-
JJ-Rod replied to the thread Advice on upgrading home lab from Proxmox 8.4.19 to 9.x.My advice would be to set up a second PVE host, even if it's an older, basic machine. The risks with only having one PVE host seems unnecessary, especially during a major upgrade.
-
66equj5 replied to the thread [LXC Problematik] Promox Virtual Environment 9.2.5 - LXC Container - Probleme nach Update oder Fehlbedienung.Bißchen mehr Info ist noch wünschenswert. :rolleyes: Ich hab nur LXC basierend auf Debian (wie PVE). Vielleicht liegt's daran.
-
DDeQuzzie posted the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? in Proxmox VE: Installation and configuration.Hi, The standing advice for years has been to leave dedup=off on ZFS pools under Proxmox: the DDT lives in RAM, the write path suffers, and you can't turn it back off for data already written. OpenZFS 2.3 ships fast dedup, which is supposed to...
-
BBerndZ replied to the thread Upgrade von 6.3-2.Vielen Dank an alle, die mir beratend unter die Arme gegriffen haben. Ich habe mit dem Ventoy Stick die aktuellste Version 9.2.2 installiert und meine Backups wieder zurückgespielt. Und alles läuft. Allein die Tatsache, dass es so etwas wie...
-
UdoB reacted to daanw's post in the thread Advice on upgrading home lab from Proxmox 8.4.19 to 9.x with
Like.
Never had any issues upgrading while keeping the OPNsense/router VM running. Your mileage may obviously vary. Just make sure you have backups (which you should anyway) so in the unlikely case something fails you can always do a plain PVE 9... -
UdoB replied to the thread Advice on upgrading home lab from Proxmox 8.4.19 to 9.x.Without guarantee: yes. But I would try to avoid that too. Yes. That's a valid use case for "Proxmox Offline Mirror" as it works... offline --> https://pom.proxmox.com/"
-
DDeQuzzie reacted to Enrique Garcia Polo's post in the thread After PVE upgrade to 9.2.5 My Servers get IO Errors and my VMs doesnt work with Like.
Finally I had to modify boot string with intel_iommu=on iommu=pt intremap=off Then I can use any kernel
-
Jjan-t posted the thread [LXC Problematik] Promox Virtual Environment 9.2.5 - LXC Container - Probleme nach Update oder Fehlbedienung in Proxmox VE (Deutsch/German).Hallo PMler, wann ist bei Updates von Poxmox mit Problemen von LXC Containern zu rechnen? System: Promox Virtual Environment 9.2.5 Promox hatte ich länger nicht genutzt, meine auf Ubuntu basirende LXC waren nicht mehr funktionisfähig. Was...