For anyone interested, here's a rough script that does it all.
I made it more dynamic so you can set your desired quantity of VFs.
1. Edit the variable IB_DEVICE_NUM_VFS="8", simply replace the number with what you want.
2. Run the script
3...
Here is how i was able to get proxmox working with Infiniband and SR-IOV.
Hardware used is a mellanox switch (sx6036) and a mellanox Cx-4 100gbps EDR dual (or single) port card. Make sure the firmware is latest.
AS FAR AS IM AWARE, THIS WILL...
Using S3 backend you just have to provide a 64GB datastore used as a cache, and let PBS doing everything else.
I already used a 32GB datastore to backup around 250GB on s3 every day, it just works.
Naja in der von dunuin verlinkten Doku steht folgendes:
Für mich liest sich das so, als ob das Problem bei priviligierten Containern gar nicht und sonst nur bei vorhandenen systemd-networkd oder docker auftritt. Vielleicht braucht podman das...
Hi,
We receive this notification from our internet provider on a regular basis:
Port 25/tcp
SSL Anonymous Cipher Suites Supported
The remote host supports the use of anonymous SSL ciphers. While this enables an administrator to set up a service...
like many distros, we normally generate a new key for every release. we ship it in the previous release well before the new release is cut, to allow for a smooth transition.
Thank you @complexplaster27 for this update. It does in fact work to update to dcism-osc_8.1 - you definitely then want to make sure a compatible dcism version is installed, too, like 6.1 mentioned in your post.
Keep in mind though, you wouldn't...
Hello, I just found this thread on google. With the latest version OM-iSM-Dell-Web-LX-6100-4104.tar.gz on Proxmox 9.1.9
UBUNTU24/x86_64/dcism-6.1.0.0-4104.ubuntu24.deb
I ran dpkg -i dcism-6.1.0.0-4104.ubuntu24.deb
Said this:
Selecting...
Hi,
this was fixed for PVE, see https://forum.proxmox.com/threads/pve-7-oidc-discovery-via-http-proxy.92174/
My current workaround is a systemd-drop-in:
#/etc/systemd/system/proxmox-backup.service.d/proxmox-backup_proxy.conf
[Service]...
Hi Guys,
Has anyone had any experience deploying this on oci or any other cloud providers?
Any compatibility issues to take in to consideration
Many thanks
I am not sure how to do that. I don't work with proxmox that often. It has been running for a couple years untouched. My BU drive died so needed to add a different one. I tried adding this drive on Monday using shell but it was unsuccessful. The...
I am also having this issue, please share what you did to fix it
EDIT: I fixed this by removing ip protocol bgp route-map correct_src from the frr config
Thank you! That did the trick. I used nano to edit fstab to comment out
"/dev/disk/by-uuid/EA0E1A030E19C989 /mnt/usb-drive ntfs defaults 0"
She is up and running again. I appreciate your help.
Log in/continue boot and then check cat /etc/fstab and node > Disks > Directory in the GUI. Seems like these are PVE managed storages which are based on a mount unit. If possible I'd remove them in the GUI.
After the PVE upgrade 9.2.5 I cannot migrate VM.
I have the message "Cannot migrate vm because ha resource vm:XXX is no-allowed on the selected target node"
l have also some times the message "Cannot migrate conntrack state, target node is...
Das ist ein eingegrenztes Problem, jedie hat die eigentliche Arbeit schon gemacht. Ich häng mich mit einem fachlichen Punkt dran (VT-d/IOMMU ist die Ursache, der XFS-Fehler ist nur Symptom).
Der XFS-Fehler ist hier gar nicht das eigentliche...
So, and now for the resolution (at least for me on PVE 9):
1. The problem seems mostly be down to a problem in time setup (i.e. when time once runs backwards, it ruins the RRD database).
2. Some of the given commands were wrong and / or...
Veeam support asked me to do additional testing and according to the results, problem seems to be in Hot-Add with Veeam Proxy. This still has to be verified by Veeam, but below are my findings.
When Veeam PVE proxy Hot-Adds the disk => Almost...