Latest activity
-
fschauer replied to the thread Better way to idmap and control devices permissions in LCX.PVE supports device hotplugging into a running container. This could theoretically be automated with a udev rule that calls the appropriate pct set <vmid> --dev<n> path=/dev/path/to/device command when a new device appears. But once a device is... -
FFischer-HWH reacted to fabian's post in the thread Upgrading error: Failed to read "SetupMode" variable: No such file or directory with
Like.
this is https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1141975 until a fix on the shim side is available, please boot grub directly (these systems cannot support SecureBoot anyway) -
Hhbbn replied to the thread VM connectivity lost after bond failover.Using UCS fabrics? or option out LACP? I would like to control the traffic flow, I'm not 100% in control if I use LACP I will not like to have traffic flowing through the fabrics uplinks unless it is a failover scenario. at least not in HCI...
-
JJohannes S reacted to IsThisThingOn's post in the thread S3 Local datastore recommendations? with Like.
No, why should it? It is cache. I hope this is a typo, otherwise good luck with your S3 bill ;)
-
JJohannes S reacted to Chris's post in the thread Can we please get retries for making backups? with Like.
Tangentially related to https://bugzilla.proxmox.com/show_bug.cgi?id=6464, please add and subscribe there. For an active backup session with Proxmox Backup Server resume/retry is not straight forward though, due to the design of the backup protocol.
-
JJohannes S reacted to LnxBil's post in the thread How do you enforce per-pool (tenant) resource quotas for CPU / RAM / disk in Proxmox? with Like.
Storage capacity is easy if the underlying storage supports it. In the end you need a storage for each tenant, so that the configured storagr has the quota. There is (at the moment) no way to configure restrictions just based on some logic in...
-
JJohannes S reacted to coming.link's post in the thread [feature request]: expand the storage/upload API to support `snippets` with Like.
This is a feature/improvement request. I am working on a tool that sets up a few templates onto a cluster, each template is meant for automated testing and relies on cloud-init to do all of the early bootstrapping. Right now, I can issue a `GET`...
-
JJohannes S reacted to acicek's post in the thread [feature request]: expand the storage/upload API to support `snippets` with Like.
Hi, I'm using the terraform bgp/proxmox provider to deploy my VMs using cloud-init.yaml to bootstrap the VM. The Provider creates a individual cloud-init.yaml file for each VM and stores it on a desired storage on Proxmox VE. To use this feature...
-
JJohannes S reacted to Bu66as's post in the thread [TUTORIAL] Backup RAW image oder ZFS_SEND -> restic with Like.
Cooles Projekt, sieht echt durchdacht aus. restic check verifiziert dir nur die restic-Chunks, ob der zfs-send-Stream danach auch sauber per zfs receive wieder zurückkommt, sagt dir das nicht. Ich würd regelmäßig echt mal einen Test-Restore in...
-
JJohannes S reacted to Bu66as's post in the thread CheckMK Fehler Proxmox Monitoring: PVEScheduler und Interface Speed with Like.
Der pvescheduler forkt für jeden geplanten Job einen Worker-Prozess, deshalb siehst du kurz 2 statt 1. Das sind nicht nur die Backups, Replikation läuft da auch drüber. Hast du ZFS-Replikation am Start die alle paar Minuten triggert? Das würde...
-
Dd1nuc0m replied to the thread Can't use ACME CA without ToS.It's already in the CAs known to system - it's not an internal/self signed CA
-
Aankitbsaradagi posted the thread LDAP realm filter field limited to 2048 characters — recommended approach for many AD groups? in Proxmox VE: Installation and configuration.Issue: 1) We are configuring Active Directory authentication and group-based access control in Proxmox VE. 2) To limit synchronization to users who belong to a defined set of AD security groups, we are using multiple `memberOf` conditions in...
-
RRaph123FR replied to the thread How do you enforce per-pool (tenant) resource quotas for CPU / RAM / disk in Proxmox?.Do you find any solution for that ? I'm interested in performing the same procedure
-
tomellm replied to the thread Can't use ACME CA without ToS.Have you tried doing what the last comment in the thread you mentioned has done? I would just like to get a better picture of the issue. -
Aapollo13 replied to the thread VM connectivity lost after bond failover.That is mistake number one :D Others would say that the upside of an open system like proxmox is that you can do stuff on your own. And I'd trust my selfmade scripts more than VMWare ;) It is not "designed" in this way. It is probably simply...
-
Hhbbn replied to the thread VM connectivity lost after bond failover.LACP is not an option for us. we are using Cisco UCS fabric interconnects. And using selfmade scripts for production setups is not a good solution. Did you ever find any answers on why proxmox is designed this way?
-
tomellm replied to the thread how to find backup tasks for a specific backup job id.I have been looking around a little bit, but it seems like the jobid is not exposed anywhere, not even in the Job logs.
-
Aapollo13 replied to the thread VM connectivity lost after bond failover.Using LACP to the switches fixes it, otherwise hook into the bond status changes and announce via qemu as shown above as an example.
-
Hhbbn replied to the thread VM connectivity lost after bond failover.Hi, I have this exact issue, did you find any solution for it? It is kind of a show stopper for us to start using proxmox compared to our vmware setup to day. Thanks
-
GHallo zusammen, so, hat leider Arbeitsbedingt ein wenig gedauert, aber hier mal eine kurze Rückmeldung von unserem Testsystem. Ich habe bei den Platten fürs System und die VMs das Hardware Raid benutzt, die 2x 300 GB fürs System in Raid 1 und...