Latest activity
-
GNicht vergessen, der PBS ist durch seine Deduplizierung nur mit SSDs optimal, was gerade beim Backup zu delays bei dem VMs führen kann. Das sollte man auf jeden Fall im Hinterkopf behalten und ist kein Mangel an der Software.
-
Mmow replied to the thread [SOLVED] Hardwarer oder Software RAID.Der P440ar hat mindestens 1GB und maximal 4GB FBWC, wir haben einen pbs auf einer DL380G8 mit P420i und 1GB FBWC mit 4x3TB und 4x4TB jeweils als RAID5, Datastore auf den 9TB, und das ist eigentlich flott genug, solange die Metadaten in den Cache...
-
Ccamjesus posted the thread [SOLVED] VM's won't start on boot in Proxmox VE: Installation and configuration.Hello @all, sometimes (often) some of my vms won't start on boot. Manual start works flawlessly. Can't really reproduce it, so a little help as to how to troubleshoot would be nice. Looked in the log files, but found nothing relevant. Guess I...
-
AAzunai333 reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.1 released! with
Like.
We are pleased to announce the release of Proxmox Datacenter Manager 1.1! This point release focuses on expanding visibility and automation for large-scale, multi-site deployments. Our main focus for this iteration has been introducing... -
Rhttps://bugzilla.proxmox.com/show_bug.cgi?id=4646
-
Uuzumo replied to the thread Proxmox VE 9.0-1 install via Ventoy - kernel panic.If you really just want to know the solution, that’s fine too. It’s just that, since you’ve already reinstalled it, I thought it would be a good idea to check whether the issue has been resolved in the latest version. If you fix it that way...
-
Wwoma replied to the thread The cloned virtual machine failed to start.A jump from 0% to 100% with no steps or progress in between usually means empty disk image. So there is no OS that could be booted.
-
AAdam Camryn replied to the thread Getting issue in VM start ..This usually means a stale lock from a previous task. First, check if another VM task is still running. If not, remove the lock file (/var/lock/qemu-server/lock-236981.conf) only after confirming no active process is using the VM. If it keeps...
-
The only thing I can think of is vcpu configuration. on a modern windows guest you really want to set it to x86_64_V3 or better. Avoid host without tuning, and QEMU/earlier X86_64 variants can have missing cpu features. -
BBu66as replied to the thread CheckMK Fehler Proxmox Monitoring: PVEScheduler und Interface Speed.Der pvescheduler forkt für jeden geplanten Job einen Worker-Prozess, deshalb siehst du kurz 2 statt 1. Das sind nicht nur die Backups, Replikation läuft da auch drüber. Hast du ZFS-Replikation am Start die alle paar Minuten triggert? Das würde...
-
Hi, sorry for the late reply! At least for two rooms this is already possible with non-strict node affinity rules as these will fallback to the other available cluster nodes if none of the specified nodes are available anymore. However, an HA... -
Hello all, Sorry to resurrect this thread but should VMs be moved from the volume before disabling autoactivation. If not, is there a risk of VMs going down after the command is run? Thank you, -
SSwanand replied to the thread Getting issue in VM start ..The process is showing , but it is in stuck mode and not using any cpu and memory ..
-
MMaltePScheuss replied to the thread Running Cisco UC Appliances In Proxmox (i.e., CUCM, CUCS, Expressway, IM&P, CMS, CSR1000v).The Image of the critical error seems, that this error is in the middle of the installation. so you have a bootable.iso so you run through the installation parameters (IP, name, NTP, whatever...) in my case, my iso was corrupted, i had to...
-
Aandreworg replied to the thread Proxmox VE 9.0-1 install via Ventoy - kernel panic.Not sure I get what you mean. 20_memtest86+ executes any /etc/default/grub.d/*.cfg; I did not add any code, just advised to remove anything that possibly adds rdinit=/vtoy/vtoy to GRUB_CMDLINE_LINUX, resulting in it being added in entries in...
-
Ttangshuai replied to the thread The cloned virtual machine failed to start.The original version of the virtual machine is ProxmoxVirtual Environment 8.3.0, and the restored environment version is ProxmoxVirtual Environment 9.2.2。The backup uses ProxmoxBackup Server 3.1-2。
-
Ttangshuai posted the thread The cloned virtual machine failed to start in Proxmox VE: Installation and configuration.通过PBS备份恢复的虚拟机可以正常启动，但将虚拟机转换为模板后，克隆的虚拟机却无法正常启动。
-
-
Ccrs369 replied to the thread VMs freezing after PVE8 → PVE9 upgrade — TSC marked unstable, HPET fallback causes cascading perf interrupt storm on EPYC 7401 nodes.I had have the same issue and I want to share the path that I go and the solution that worked for me. My Promox-Cluster has three nodes 1 x AMD 3900 and 2x AMD 5600G. After the Migration from 8.2 to 9.2 the nodes with the AMD 5600G show high...
-
BBu66as replied to the thread [TUTORIAL] Backup RAW image oder ZFS_SEND -> restic.Cooles Projekt, sieht echt durchdacht aus. restic check verifiziert dir nur die restic-Chunks, ob der zfs-send-Stream danach auch sauber per zfs receive wieder zurückkommt, sagt dir das nicht. Ich würd regelmäßig echt mal einen Test-Restore in...
-
Dduk2nuk replied to the thread Running Cisco UC Appliances In Proxmox (i.e., CUCM, CUCS, Expressway, IM&P, CMS, CSR1000v).How you import ova file in proxmox? While importing ova file from cisco, get this config. I tried to edit config, or create vm from scratch. Always receive error (actual config on last screen)
-
