Latest activity
-
TTErxleben replied to the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive.Meine Meinung: Wenn jemand die Ergüsse einer KI in ein Forum stellt, damit sie bewertet wird, aus dem sich eine KI maßgeblich bedient, dann platzt mir fast der Sack! Glaubst du wirklich irgendwer hier will über solche KI-Ergüsse nachdenken und...
-
j.theisen replied to the thread Question on ceph minor updates with PVE patches.Hi @cfgmgr thanks for posting on the forum! There are indeed documents for all the major upgrades you mentioned: PVE 8 to PVE 9 : https://pve.proxmox.com/wiki/Upgrade_from_8_to_9 Ceph 18 (Reef) to Ceph 19 (Squid) ... -
MMarkku reacted to t.lamprecht's post in the thread Kernel 6.17 - End of Support after July with
Like.
Hello, Given that ubuntu upstream is in process of phasing this kernel out, and we're already now spending considerable amount of engineering time to handled backporting (security) fixes on top of upstreams work, we decided to go through with... -
Ccfgmgr posted the thread Question on ceph minor updates with PVE patches in Proxmox VE: Installation and configuration.Greetings! I have a 4 node cluster running 8.4.5 with Ceph 19.2.4. My eventual goal is to get to PVE 9.2.x but based on the upgrade guide I need to get ceph upgraded first. Perfectly fine. Are there any specific updates/steps for applying just...
-
JJohannes S reacted to JoaGamo's post in the thread Proxmox VE Ceph Benchmark 2023/12 - Fast SSDs and network speeds in a Proxmox VE Ceph Reef cluster with Like.
See the updated documentation here with OpenFabric https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server
-
fiona replied to the thread Snapshot failed with qemu_savevm_state_complete_precopy error -5 followed by savevm-start failed - VM snapshot already started.I cannot. But looking over your provided info again, I think the issue might be that your guest dirties too much RAM. The volume to contain the state is created with 2 times the size of the memory plus 500 MiB for the device state. If your... -
HHugoTea replied to the thread Proxmox fresh install - Wont boot after.Hi, I'm also using an RH2288H and I had the exact same problem. I resolved it by switching the boot mode in the BIOS setup to just Legacy Boot / CSM, disabling EFI boot and or dual boot. I then booted the installation media in CSM mode, and...
-
JJohannes S replied to the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive.Wie ist denn sonst eurer Netzwerk und Storage aufgebaut? Habt ihr eigene Netzwerke für den regulären Traffic,Corosync und die Replikation oder alles über die gleiche Leitung? Wieviele Knoten sind im Cluster und was für SSDs oder HDDs habt ihr im...
-
JJohannes S reacted to Impact's post in the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive with Like.
Ja, ist sehr bekannt.
-
JJohannes S reacted to woma's post in the thread Detected Hardware Unit Hang - Pve Host verliert quorum und wird unresponsive with Like.
Hört sich nach einem bekannten Problem der E1000 NIC an. GIbt neben zahlreichen englischen Threads auch diesen hier: https://forum.proxmox.com/threads/pve-umgebung-und-guests-teilweise-nicht-erreichbar-logs.184189/#post-856796
-
JBoah! Da steht: Ich hätte das eine TB DDR4 RAM :-) Das Ding wird vermutlich durchaus das tun, was es verspricht. Aber: man kann halt nix erweitern. Und "Dual 4K" sind für einen Einsatz als Pseudo-Server genauso verschenkt wie "WiFi 2.4G + 5.0G...
-
JA few notes based on our experience with NVMe/TCP and PVE: Your performance expectation should come from your storage stack, not your choice of protocol. The transport is usually not the bottleneck in setups like this. If you're seeing latencies...
-
JJohannes S reacted to JoaGamo's post in the thread High Latency on a new HDD-disks (ceph) with Like.
As already said, 80-100ms latency is very normal for HDDs If you want to improve Ceph performance on the HDD pool, consider offloading WAL + RocksDB to a SSD for HDD OSDs. The safest method implies you have to evacuate each existing HDD OSD...
-
JJoaGamo replied to the thread High Latency on a new HDD-disks (ceph).As already said, 80-100ms latency is very normal for HDDs If you want to improve Ceph performance on the HDD pool, consider offloading WAL + RocksDB to a SSD for HDD OSDs. The safest method implies you have to evacuate each existing HDD OSD...
-
NNevadaTech replied to the thread [SOLVED] Proxmox crashing, hardware issue?.Yes, I agree completely. The similarity+constant is why I thought the DIMM was bad. In one maintenance window I pulled the RAM and installed it reverse order. I also let the mobo dictate the default memory settings. I sure there are ways to eek...
-
Iinformant posted the thread failed to query local AF_VSOCK CID in Proxmox VE: Installation and configuration.Hi i have since last proxmox update in one vm following error: what is it, it dont comes before. i have solve as workarround it with nano /etc/default/grub systemd.ssh_auto=no update-grub reboot any ideas?
-
-
JJoaGamo replied to the thread Proxmox VE Ceph Benchmark 2023/12 - Fast SSDs and network speeds in a Proxmox VE Ceph Reef cluster.See the updated documentation here with OpenFabric https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server
-
NNevadaTech replied to the thread [SOLVED] Proxmox crashing, hardware issue?.About 2 days ago I updated the AMD-microcode waited for a couple hours and no CPU/memory errors showed up on the console, the AMD-Vi wait loop still appeared but it seemed a little less frequent (seemed or reality?) shutdown I then went into...
-
A few notes based on our experience with NVMe/TCP and PVE: Your performance expectation should come from your storage stack, not your choice of protocol. The transport is usually not the bottleneck in setups like this. If you're seeing latencies... -
TTErxleben replied to the thread Upgrade von 6.3-2.Wenn du verlässliche Sicherungen hast, dann reicht das zur Installation. Nur am Rande: Ich nutze da z.B. gerne einen Stick mit Ventoy, statt einen bootable Stick pro SW. Ein HW-Wechsel ist völlig unnötig.
