Latest activity
-
FFafa24 replied to the thread Install NUT directly on Proxmox VE and control guests from here.Back to the original question about installing NUT manually. I had the chance this week to set up NUT for two separate UPS units, one on USB, one on an APC Network Management Card via SNMP. Quick summary of both: USB: lsusb to get the...
-
JJohannes S reacted to ThoSo's post in the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar with
Like.
Anders geantwortet : Wenn der Hersteller keine Updates mehr anbietet, dann ist das Gerät End Of Life! -
Llunam replied to the thread SDN : Mismatch AFI with BGP controller IPv6 session?.I believe this patch is yet to be merged - maybe an addition to the documentation would be nice as I have just hit this exact same issue with the ipv6 address family not being activated
-
Ppivo1408 posted the thread Error: Disk cannot be removed in Datacenter Manager: Installation and configuration.Error: Disk cannot be removed Hi every all . I'm running into an issue with Proxmox 9.2.3 when moving a VM to a new node; it seems the old disk is still holding onto a session on the old node. I'm using local LVM. I've tried deleting them but...
-
-
Llaxarus replied to the thread [SOLVED] How to disable Cron Notification Mails.Yep, that worked perfectly, thank you!
-
Llaxarus reacted to Onslow's post in the thread [SOLVED] How to disable Cron Notification Mails with Like.
I would omit 2>&1 above. that is, just >/dev/null at the end. So that the admin is notified if the command fails for some reason :cool:.
-
Bbk4869 replied to the thread Aruba Virtual Appliances: Clearpass, Virtual Mobility Conductor, Airwave.This works for me. The NIC must emulate a real network adapter; any VirtIO or VMWare NIC won't work. PVE: 9.1.2 Aruba VMC: 8.13.2.2
-
-
AAndreasHemsen posted the thread Manitu provider configuring in Mail Gateway: Installation and configuration.Hello forum members, As a new member, I have a question—perhaps a silly one, I’m not sure. I am completely new to this subject, so apologies if this is a dumb question. I have installed Proxmox Mail Gateway; I’ve managed to get a lot done using...
-
cwt reacted to davidlynch's post in the thread [SOLVED] Proxmox crashing, hardware issue? with Like.
You can swap the RAM with one of your known-good servers first and see if the errors follow the DIMMs. The logs make me think it's more likely a memory issue than the microcode, especially with another system using the same Nemix RAM showing... -
cwt replied to the thread [SOLVED] Proxmox crashing, hardware issue?.The same syndrome and nearly the same physical address occur multiple times, so this looks more like a persistent problem with a DIMM, memory channel, socket contact, memory controller or unstable RAM configuration than a random single-bit event...
-
Ddavidlynch replied to the thread [SOLVED] Proxmox crashing, hardware issue?.You can swap the RAM with one of your known-good servers first and see if the errors follow the DIMMs. The logs make me think it's more likely a memory issue than the microcode, especially with another system using the same Nemix RAM showing...
-
Why is there a Proxmox VE v8.4.19 running? What CPU Type do you use? So get the lshw programm with apt install lshw. for the Asrock X470D4U you can download the English manual. and on Page 22 you find: So your 2666 MT/s is normal with 4x DDR4... -
TI like to use this: https://github.com/VoltKraft/PBS_Chunk_Checker
-
Mmeyergru replied to the thread Problem with rsync mtime preservation since update to kernel 6.17.13-6-pve (solved by avoidance of nfs 4.2).Me too, similar situation: an "rsync -a" syncs the timestamps of the original files first and after a short while the mtime of the file switches to the time of copy. Falling back to NFS version 4.1 on the mount fixes the problem.
-
Mmeyergru reacted to raipvs's post in the thread Problem with rsync mtime preservation since update to kernel 6.17.13-6-pve (solved by avoidance of nfs 4.2) with Like.
I have the same problem on Proxmox 9.2.4 with kernel 7.0.14-3-pve as NFS-Server and NFS-clients running 7.x kernels. A workarround for me is to mount the filesystem with NFS version 4.1: mount -o vers=4.1 SERVER:/DIR /mnt I guess it is a kernel bug.
-
DDerPaddy posted the thread PVE 9.1/9.2 installer + kernel 7.0 fail on Intel H97 SATA — 9.0-1 and kernel 6.14 work! in Proxmox VE: Installation and configuration.Preface: I just registered to share my almost week long suffering chasing imaginary hardware issues and the very simpel software bug/limitation that caused it. A few weeks ago I used Claude.ai to cobble together a comprehensive manual to get...
-
Vvluxh replied to the thread Proxmox + Pocket ID + OIDC.hello, glad it works for you. just leaving this link here for others using caddy + pocketid + pve: https://forum.proxmox.com/threads/proxmox-ui-caddy-and-reverse-proxy.83198/ cheers!
-
VHi, I have only registered in order to post my solution to the problem. The working entry in my Caddy config file is as follows: proxmox.lan { reverse_proxy 192.168.1.200:8006 { transport http {...
-
Llethuer replied to the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar.Anders gefragt: gibt es noch Dinge die ich tun kann oder bin ich mit dem BIOS Update am technischen Ende angekommen ?
-
Wweconnect replied to the thread PMG behind Proxmox DNAT - real sender IP not visible, SPF checks failing.Hello, The reason you are seeing the internal gateway IP (10.0.0.1) instead of the real public IP is usually due to Source NAT (SNAT) or Masquerading being applied on the Proxmox Host alongside the DNAT rule. When masquerading is active for the...
