Latest activity
-
Ddokkenrolf replied to the thread Windows 10 VM - Kein Netzwerk.virtio installiert? Bei mir laufen Win10/11/2025 problemlos unter dem akt. PVE 9.
-
OI apologize for my emotions in my previous post. Insulting developers was not my intention. I just could not fully understand the storage hardware requirements for PBS. It is really complicated for newbies. Documentation says "yes, you can use...
-
MHi, first off - using DHCP with Proxmox VE (and physical servers in general, IMO) isn't really recommended. In any case - this is totally expected, as nic0 is attached to the vmbr0 bridge. In such network scenarios, the bridge should have the...
-
AAndreas Pflug replied to the thread ZFS Disk FAULTED after reboot.zpool status -L pool: ironpool state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scan: resilver in...
-
Eerfus replied to the thread No Login with ActiveDirectory Realm.This also fixed it for us - we didn't expect it is case sensitive since PVE isn't. Is there any way to enable case-insensitivity like in PVE? Or are there plans for change in behaviour? Many thanks!
-
Ffloh8 reacted to Bu66as's post in the thread RDMA / RoCE - CEPH Cluster - Performanceoptimierung with
Like.
Zur GID-Frage: brauchst du kein komplettes MLNX_OFED, das zerschießt dir eh nur den PVE-Kernel-Stack. show_gids ist nur ein Wrapper, der die sysfs-Files ausliest, das kannst du einfach selbst machen: for t in... -
cheiss replied to the thread DHCP in Proxmox.Hi, first off - using DHCP with Proxmox VE (and physical servers in general, IMO) isn't really recommended. In any case - this is totally expected, as nic0 is attached to the vmbr0 bridge. In such network scenarios, the bridge should have the... -
news replied to the thread ZFS Disk FAULTED after reboot.I'm interested, please show the results of: zpool status <pool-name> zpool list -v <pool-name> -
MHello, I'm very new with Linux. I try to configure Proxmox to use IP Address which is provided by my DHCP server, where I have configured it as a static IP address. But I'm not sure that the following configuration is correct auto lo iface lo...
-
Nyou should be able to set a new password on the cli with: pvesm set ut-pbs --password it will then ask the password and save it
-
Nnethub replied to the thread pct restore --password option does not set root password (works with pct create).Hi fabian, We noticed that this issue does not seem to be fixed yet. Could we please check if there are any updates or a planned fix for this?
-
MMastahh replied to the thread set DHCP on proxmox.The DHCP can be configured to provide static IP, there is not point to set it in Proxmox, as it is easier to make centrally. But problem after every restart Proxmox doesnt' get ip from DHCP server
-
AAndreas Pflug posted the thread ZFS Disk FAULTED after reboot in Proxmox VE: Installation and configuration.I recently upgraded two machines with big ZFS pools: one to PVE9.2.4, the other to PBS4.2.2, so both machines have Kernel 7.0 and ZFS 2.4.3 now. One pool is raid-z1 (12x18TB), had one drive faulted, the other raid-z2 (12x18TB), with two drives...
-
MMcShadow posted the thread How can I make Proxmox allocate the full configured VM memory at startup, similar to VMware? in Proxmox VE: Installation and configuration.Hi, I am trying to understand how memory allocation works in Proxmox VE compared to VMware. My environment contains both Linux and Windows VMs. For all VMs, the following memory options are enabled: Ballooning Device Allow KSM For each VM...
-
-
JJohannes S reacted to Bu66as's post in the thread SPICE client "virt-viewer" noch immer empfohlen? with Like.
Die Wayland-vs-X11-Diskussion hier dreht sich eigentlich um einen anderen Fall, nämlich das X-Forwarding bzw. waypipe von @UdoB übers WAN. Für dich mit SPICE/virt-viewer ist das völlig wurscht: SPICE zieht den Framebuffer der VM ab, ob darunter...
-
JJohannes S reacted to Bu66as's post in the thread Metro/Stretch cluster mit Proxmox als Alternative zu vSphere oder Nutanix with Like.
Wichtige Punkte wurden schon abgedeckt (Ceph, FC/LVM, PBS-Strategie). Was aber etwas untergegangen ist: deine eigentliche Frage zur Latenz beim Stretch. Bei Corosync und Quorum kommt es nicht auf den Durchsatz an, sondern auf die Latenz und den...
-
JNe, so einen "nimm einfach das eingelegte Band"-Modus wie bei Veeam gibts im PBS leider nicht direkt. Der PBS denkt in Media-Sets, und innerhalb eines laufenden Sets will er zum Anhängen genau das nächste Band aus dem Set, deshalb die Zicken wenn...
-
JJohannes S reacted to Ernst T.'s post in the thread Bestpratice Frage: Proxmox Host "clustern" with Like.
Das ist aber absolut nicht notwendig. Ich hab zB. alle meine Docker config Daten (in Unterordnern) in /opt/docker/ liegen. Beim Umzug mach ich einfach ein rsync dieses Ordners auf das neues System. Danach ein paar docker-compose up -d und alles...
-
Ffrank lupo reacted to Johannes S's post in the thread Frage zum Freitag: Desktop Environment on top of PVE with Like.
This won't help OP though. He wants to install a Desktop GUI (bad idea imho if you don't happen to be a developer) on the host not access vms or lxcs via an vdi like mechanism. This being said: Your projects are quite cool, I'm a fan, especially...
-
Moayad reacted to t.lamprecht's post in the thread New Archive CDN for End-of-Life (EOL) Releases with Like.
Today, we announce the availability of a new archive CDN dedicated to the long-term archival of our old and End-of-Life (EOL) releases. Effective immediately, this archive hosts all repositories for releases based on Debian 10 (Buster) and older...
