Test 1 and Test 2: no flap introduced.
Output before VM
Output After VM
Output when I try to do test 4
For the boring stuff:
With 2 different ethernet cables with three different ports (also plugged into a port on a Flex 2.5g ) same issue.
Hello,
Does upgrading from Ceph Squid to Ceph Tentacle require stopping the VMs? Or a maintenance window during low production activity, like in the night? Or can it just be done on the fly?
No that was 5 years ago and I checked just now: File is gone. I think due to upgrades/migrations/re-installs.
Any packet that passes through the router. All invalid packets are being dropped.
As I wrote in my first post:
Client, router and...
Die VMs sind alle per ZFS formatiert, die Backups laufen über Proxmox Backup Server, ich verstehe nicht was die parted /dev/sdb print auswirken soll, wenn das laufwerk doch garnicht erst gemountet werden kann, dies muss irgendwie doch beim mount...
I was unable to access 192.168.1.231 Apache server is due to pfsense firewall configuration issue. I have fix the firewall rule now I can access the web server.I will slowly move other vm's to 192.168.1.0/24 network. Thanks your support and...
I would not try to do it all on one machine if those VMs are at all important to you. It is always a good idea to have a fallback plan.
I would take any machine you can get to make a temporary proxmox box, even if it is a laptop or something...
It's not impossible, but whether you can do it depends on you, so please decide for yourself if you think you can.
https://pve.proxmox.com/wiki/Advanced_Migration_Techniques_to_Proxmox_VE#Virtual-to-Virtual_(V2V)
I think the section titled...
271 should be the least problematic recent driver AFAIK.
re: TRIM, manually add this to the VM's /etc/pve/qemu-server/###.conf file for much faster TRIM: args: -global scsi-hd.discard_granularity=8388608
(edit: link -...
Die KI spuckt sofort folgendes aus, was auch plausibel ist:
parted /dev/sdb print Ausführen. Wenn das Feld Dateisystem leer ist, kommt es zu dem verhalten. (Wenn die Disk als sdb erkannt wird)
Die korrekte Info setzt du mit:
parted /dev/sdb set 1...
Das musst du selbst beheben. Linux geht immer davon aus, dass der Header korrekt beschrieben wurde und da die Information zum verwendeten Dateisystem steht.
Wenn die Info fehlt, dann wird das Fehlerbild unter allen nicht Windows Systemen bleiben.
@arnoproxmox I may have found the culprit. I came upon one of your earlier posts https://forum.proxmox.com/threads/forwarding-ipv4-packets-default-setting.89773/
why have you got ip_forward set ?
Japp ... mehr Informationen bereitstellen als "wir haben da so eine schwarze Box, die was macht und die soll nun irgendwie bewegt werden". Auch mal den Hersteller der Appliance kontaktieren, wobei die meisten sich da sperren und irgendwelche...
Hi all,
I'm designing offsite backups from PBS to AWS S3 for several sites, some with limited internet uplinks. My goal is that PBS uploads each backup once to a primary S3 bucket, and the second copy is created within AWS, I specifically want...
Meine Empfehlung wäre, da es sich um eine geschäftliche Umgebung handelt, für die Migration einen erfahrenen Dienstleister oder Berater hinzuzuziehen. So kann sichergestellt werden, dass die Umstellung fachgerecht geplant und umgesetzt wird. Der...
Yes, this does not make any sense to me. Routing involes two subnets, with just one, nothing can be routed.
From where to where ... please explain in detail what you have, what you want and what is not working as expected. Without any...
Kann man dies selbst lösen oder auf den Patch von Proxmox warten? Ich habe gelesen dass im Linux Kernel 7.2 massive NTFS Verbesserungen kommen inkl. neuem NTFS Kerneltreiber, der viele Fehler behebt und bessere Kompatibilität hat.