Latest activity
-
Uuzumo replied to the thread [SOLVED] kernel 7.0.14-2, PCIe pass-through for amdgpu does not work properly..Thank you. After applying the update, I confirmed that the virtual machine with the AMD RX 9070XT passed through starts up without any issues.
-
Uuzumo reacted to t.lamprecht's post in the thread [SOLVED] kernel 7.0.14-2, PCIe pass-through for amdgpu does not work properly. with
Like.
Wanted to reply here now with that info, but you were quicker - thanks a lot! Thank you for your report; as the newer version really only has just these two new commits reverted, we moved it out faster so that it now already caught up on all... -
RRice and Soy Sauce replied to the thread Proxmox installation failed on "bootloader setup errors: unable to install initramfs".Came here to say v.9.0.1 worked while v9.2.1 returned the same errors as OP. I noticed that when v9.2.1 installer booted, my video card resolution wasn't set correctly so all the fonts were like 800x600. With v9.0.1 installer, it properly...
-
Uuzumo reacted to Johannes S's post in the thread Proximo - The Proxmox MCP/A2A you can hand the keys — VE + Backup Server + Mail Gateway + Datacenter Manager on one audited trust core with Like.
Why did you open a new thread and why didn't you link the old one with it's critism? I still think that handing the keys to a vibecoded ai agent is a bad idea...
-
JJohannes S replied to the thread Proximo - The Proxmox MCP/A2A you can hand the keys — VE + Backup Server + Mail Gateway + Datacenter Manager on one audited trust core.Why did you open a new thread and why didn't you link the old one with it's critism? I still think that handing the keys to a vibecoded ai agent is a bad idea...
-
Jjayoh replied to the thread New Proxmox Beginners Guide E-book for Home Lab.I signed up just to say thank you. my gratitude script needed an execution!
-
jsterr reacted to SteveITS's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
Yes it could be clearer, but "at time of writing (2026-01-09) only available on the test repo"...they're there on enterprise. -
JUnderstandably, but what about building it the other way around: Connecting the tunnel from the destination side, running the sync job and the disconnecting it again? This is (without error handling) a 3 line bash script. Pulling is in general...
-
JJohannes S reacted to SteveITS's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
Yes it could be clearer, but "at time of writing (2026-01-09) only available on the test repo"...they're there on enterprise.
-
JJohannes S reacted to laxarus's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
upgrade guide still refers to test repo though, it is confusing https://pve.proxmox.com/wiki/Ceph_Squid_to_Tentacle
-
JJohannes S reacted to t.lamprecht's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
Thank you for the pointer; synced that article now to current version.
-
Uuzumo posted the thread Significant Drop in pveperf FSYNCS Scores Following the Update in Proxmox VE: Installation and configuration.I noticed that, starting with some update, the FSYNCS in pveperf has become very slow. In the past, I was getting around 9,668.38 with a single SAS disk connected to the 9500-16i, but just a moment ago it dropped to 4,532.19—I noticed the speed...
-
JI have charting for approximately 20 outlets/devices so I know where all the energy in the house is going. With all 8 HDDs spun up, this system sits at 90W, but as mentioned it is only on a couple hours a week (and actually, all of my backup and...
-
Llslamp replied to the thread IO Pressure Stall - Unexplained.I have an HP DL360 gen9 server running the following Smart Array P440ar in Slot 0 (Embedded) Internal Drive Cage at Port 1I, Box 1 (Index 0), OK Internal Drive Cage at Port 2I, Box 1 (Index 1), OK Port Name: 1I Port Name: 2I Array...
-
Llaxarus reacted to t.lamprecht's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with Like.
Thank you for the pointer; synced that article now to current version.
-
Llslamp replied to the thread IO Pressure Stall - Unexplained.sorry I did not mean to delete anything. Here is what the curreNt status is with the IO Pressure Stall still extremely high qm config 107 agent: 1 boot: order=scsi0;ide2;net0 cores: 4 cpu: x86-64-v2-AES ide2: none,media=cdrom memory: 16384...
-
-
Ccelemine1gig replied to the thread OptiPlex 7090 - host becomes pingable but all services die, zero errors in logs, requires hard reboot.See here: https://forum.proxmox.com/threads/e1000e-eno1-detected-hardware-unit-hang.59928/post-827808 The known i219 issue should not be present in your hardware anymore. If it still is there, then contact Dell. They should be aware of the Intel...
-
MmichaelFX replied to the thread Updated to 8.2 - DMA error.I met fatal error with vt-d in HPE Microserver Gen8, SATA 5 AHCI (3Gbps) failed to IDENTIFY and hard reset after boot. hope it helps ata5.00: internal error ata5.00: failed to IDENTIFY (I/O error) ata5: limiting SATA link speed to 1.5 Gbps...
-
MJein. Bei autoritativen DNS-Servern genügt es eigentlich, wenn du einen Primary und ein oder zwei Secondary-Server hast, die sich ganz normal über das Zone Transfer Protokoll synchronisieren. Bei den Forwardern kommt es darauf an, ob du mit...
-
MMoin Eine sinnvolle RAM-Verteilung sehe dann so aus: 4 GB Proxmox VE 4 GB OMV VM 4 GB HA VM x GB Weiteres Ergo: Du brauchst noch mehr RAM. Eine Minimal-Lösung sehe dann z.B. so aus: 2 GB Proxmox VE 2 GB OMV VM 2 GB HA VM x GB Weiteres Dann...
