Latest activity
-
MWillst du rumspielen oder den Plex und HomeAssistant auch produktiv verwenden? Falls ersteres kannst du auf deiner alten Kiste mit ProxmoxVE herumspielen, falls zweiteres würde ich HASS auf dem pi belassen. Plex kann man auch aus einen Container...
-
Mnoch ein paar Gedanken: Unterstützt dein Celeron VT-x VT-d und wie gut? Falls nicht, kannst du das Zeug für den avisierten PVE-Zweck entsorgen. Dann tatsächlich lieber OMV mit Docker-Erweiterung RAID würde ich mir sparen, das bringt gerne...
-
MSpiel doch erstmal mit deiner vorhanden Alt-HW rum. Installiere den vorgeschlagenen Standard. Verzichte auf RAID und weitere Optionen. Mach dir dann Gedanken, welchen Speicherbedarf du hast.
-
Ccarles89 reacted to SteveITS's post in the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL with
Like.
Yes it could be clearer, but "at time of writing (2026-01-09) only available on the test repo"...they're there on enterprise. -
Ssgw replied to the thread Wie downgrade virtio 1.285 auf 1.271?.@ivenae Danke für den Report. Auf welchem Kernel fährt da der Host? 7.x? Und Frage 2: wie lange seit diesen Änderungen? Also wie lange schon dieser problemfreie Betrieb?
-
UdoB reacted to Johannes S's post in the thread 2TB Virtual HDD Restore - Failed to Mount Virtual HDD - File Restore Function with Like.
Hat denn die Wiederherstellung aus einer NTFS-Platte schon mal funktioniert? Grundsätzlich zu beachten: Der file-restore aus VMS funktioniert nur von ProxmoxVE, bei Containern oder dateibasierten Backups auch aus den ProxmoxBackupServer. Der... -
Aahole4sure replied to the thread OptiPlex 7090 - host becomes pingable but all services die, zero errors in logs, requires hard reboot.and this is some data surrounding e1000e 244 rx_csum _offload_errors root@dell-scrypted:~# ethtool -S nic0 | grep -i "error\|drop\|miss\|reset\|hang\|over\|under" rx_errors: 0 tx_errors: 0 tx_dropped: 0 rx_length_errors: 0...
-
Aahole4sure replied to the thread OptiPlex 7090 - host becomes pingable but all services die, zero errors in logs, requires hard reboot.root@dell-scrypted:~# lspci -vnnk | awk '/Ethernet/{print $0}' RS= 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (14) I219-LM [8086:15f9] (rev 11) Subsystem: Dell Device [1028:0a52] Flags: bus master...
-
Uuzumo reacted to 10fingertyping's post in the thread Force Host Device to use Xe instead of vfio-pci with Like.
The behaviour I've observed during my testing matches with what I understand to be the intended behaviour as implemented by the Proxmox developers and outlined on the roadmap. In my setup, the PF is not bound to the VM. The virtual functions are...
-
Jyou may not want to look at a killawatt then. a 1L box will provide roughly equivalent performance at 1/5th the power draw- and thats not even brand new. 15 year old server = 150W+ at idle.
-
Uuzumo replied to the thread Force Host Device to use Xe instead of vfio-pci.I'm sorry. I was wrong. The OP is definitely right. I was wrong to assume it was the same as `i915-sriov-dkms`. It looks like there is such an option. https://pve.proxmox.com/wiki/Roadmap PCI passthrough: Improve compatibility with devices...
-
JJ-Rod replied to the thread Ceph in 2026 HDD.I have charting for approximately 20 outlets/devices so I know where all the energy in the house is going. With all 8 HDDs spun up, this system sits at 90W, but as mentioned it is only on a couple hours a week (and actually, all of my backup and...
-
EEddyall replied to the thread Force Host Device to use Xe instead of vfio-pci.So I've been breaking my head for a bit, seems I get what you are describing with loading a VF will cause the PF to switch drivers and break everything!? Ei I boot a game and suddenly my OS language is in kanji!? So from what I know Proxmox is...
-
Uuzumo reacted to Neobin's post in the thread [SOLVED] kernel 7.0.14-2, PCIe pass-through for amdgpu does not work properly. with Like.
"revert AMD display Idle State Manager to fix passthrough hang": [1] in proxmox-kernel 7.0.14-3: [2]. Not yet released. [1] https://git.proxmox.com/?p=pve-kernel.git;a=commit;h=d741df4e1fc9c5fcaf4353275e2542eaef0a46f3 [2]...
-
Uuzumo replied to the thread [SOLVED] kernel 7.0.14-2, PCIe pass-through for amdgpu does not work properly..Thank you so much!!! I'm really happy to hear it's going to be fixed.
-
SteveITS replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.Yes it could be clearer, but "at time of writing (2026-01-09) only available on the test repo"...they're there on enterprise. -
Llaxarus replied to the thread Ceph 20.2 Tentacle Release Available as test preview and Ceph 18.2 Reef soon to be fully EOL.upgrade guide still refers to test repo though, it is confusing https://pve.proxmox.com/wiki/Ceph_Squid_to_Tentacle
-
Aalexskysilk replied to the thread Ceph in 2026 HDD.you may not want to look at a killawatt then. a 1L box will provide roughly equivalent performance at 1/5th the power draw- and thats not even brand new. 15 year old server = 150W+ at idle.
-
Aahole4sure posted the thread OptiPlex 7090 - host becomes pingable but all services die, zero errors in logs, requires hard reboot in Proxmox VE: Installation and configuration.Hardware: Dell OptiPlex 7090, i5-11500T, 32GB RAM, 1TB NVMe, Proxmox VE 9.1.3, kernel 6.17.13-13-pve Problem: Every few days the host becomes completely unresponsive — Proxmox web UI dead, SSH dead, Glances dead — but the host responds to ping...
-
PParasiticTwin replied to the thread [SOLVED] spice the journey of an unitiated pleb..@dcsapak Here is the output: $ virt-viewer --verbose --debug pve-spice\(1\).vv Opening connection to libvirt with URI <null> I recall opening port 3128 on the client. So maybe its Brave? Regards,