Latest activity
-
Hhpaluch-pil replied to the thread Win2025 retrim fails with "Data error (cyclic redundancy check). (0x80070017)" while Win11 OK.I have found that faulty component is C:\windows\system32\defragsvc.dll - when I copy it from original (working) Win 2025 the defrag c: /l /v command will work again. Working version of C:\windows\system32\defragsvc.dll: # modified powershell...
-
MMarkusKo replied to the thread Proxmox VE Ceph Compatibility with Dell PERC H965i on PowerEdge R670.With 10G networking latencies will be higher. Some users on this forum which deployed ceph for customers recommend at least 25G but they mostly go with 100G networking nowadays. What SATA SSD's? Consumer grade? Enterprise grade? If you use cheap...
-
Mmmarch replied to the thread Proxmox upgrade 8 to 9 on zfs boot: upgrade fails with grub errors.This is what I get. Setting up grub-pc (2.12-9+pmx2) ... Replacing config file /etc/default/grub with new version /usr/sbin/grub-probe: error: failed to get canonical path of /dev/disk/by-id/scsi-3500a0751e6e9b12b-part3'. dpkg: error...
-
Rrlopez posted the thread Windows Server 2025 CPU suddenly at 100% in Proxmox VE: Installation and configuration.Hello, I have a branch new Proxmox VE 9.2.3 installed with all updates. I have some VMs, and one of them is a recently installed Windows Server 2025, It has no software or any particular configuration, only system installed, VirtioTools latest...
-
-
MMalavudeen replied to the thread Windows Failover Cluster.I understand the suggestion, but architecturally it introduces a serious limitation. If we deploy a third VM as an iSCSI target, then: The storage layer becomes dependent on a single VM unless we build another HA layer on top of it Performance...
-
JJ-Rod replied to the thread Windows Failover Cluster.Why not just create a third VM that provides iSCSI?
-
Ddaveanderson replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.I think between setting the NICs to 100g rather than letting them "autonegotiate" (which is a misnomer because the only speed it's ever going to negotiate with this cabling is 100g), and all the other variables, probably got us to stability...
-
Maximiliano reacted to alexskysilk's post in the thread stupid question - I accidentally deleted my /var directory. How bad is that? with
Like.
good question- I dont know. you COULD just edit the vmid.conf directly (eg, /etc/pve/qemu-server/100.conf) and add the disk directly- find the line that starts with unused0: and change it to efidisk0: might need other variables for... -
Bbepstein111 replied to the thread Everything working after power outage except one VM which lost internet connection. Different from the other similar issue..agent: enabled=1 bios: ovmf boot: order=scsi0 cores: 24 description: <div align='center'>%0A <a href='https://Helper-Scripts.com' target='_blank' rel='noopener noreferrer'>%0A <img...
-
Ssdsys reacted to packetmonkey's post in the thread [SOLVED] Network Devices Renamed after apt upgrade & power outage - Can't connect to the network with Like.
I prefer to do the autopurge after a reboot - some time back I did that after a kernel update but before a reboot and it caused me a lot of issues. I just separate the the steps since then.
-
Ssdsys reacted to packetmonkey's post in the thread [SOLVED] Network Devices Renamed after apt upgrade & power outage - Can't connect to the network with Like.
Gremlins. Obviously
-
Ssdsys reacted to Impact's post in the thread [SOLVED] Network Devices Renamed after apt upgrade & power outage - Can't connect to the network with Like.
Glad to hear :)
-
cwt replied to the thread Probleme mit Nginx Proxymanager.Die Fritzbox macht das NAT/Freigabe auf die IP des NPM für HTTP/HTTPS? Du schriebst, dass „Du alles neu gemacht hast“. Also auch eine neue VM/Container für den NPM? Falls ja, wird sich die MAC für die NPM VM geändert haben. Die Fritzbox... -
Pphilippms posted the thread Nächstes freies Tape selber bestimmen in Proxmox Backup Server (Deutsch/German).Hallo zusammen, ich habe mein Tape Backup nun am laufen und muss sagen, dass das wirklich gut funktioniert. Aktuell habe ich aber "nur" ein einfaches Laufwerk ohne Autoloader. Bisher hatten wir Veeam im Einsatz, welches einmal am Wochenende ein...
-
GGMBauer replied to the thread Proxmox VE Homeserver, ZFS, AMD Mainboard B550, AMD Ryzen 7 PRO 4750G.Da kann man jetzt keinen Rat geben, wenn man den Preis für den 4350 nicht kennt. Wenn der Preisunterschied im Bereich von sagen wir mal 20 Euro liegt, würde ich den größeren nehmen. Kerne und RAM kann man durch nichts ersetzen. 6 Kerne + HT, da...
-
Tthe_MiCrO replied to the thread Global Blocklist not working.Tracking Tracking for a newer Mail (not even marked as spam) And the pmgdb dump By the way: Personal blocklists work as expected :-/
-
Llonger replied to the thread Everything working after power outage except one VM which lost internet connection. Different from the other similar issue..Provide the vm config: qm config [VMID]
-
MMalavudeen replied to the thread Windows Failover Cluster.Thank you for the clarification. I completely understand that Proxmox VE provides its own architecture and feature set, I’m not expecting it to replicate VMware vSphere feature-for-feature. My intention in raising this question was to better...
-
Uuzumo replied to the thread Windows Failover Cluster.> where this setup is very straightforward because VMware provides features such as: If you want something that works just like VMware, please use VMware. Proxmox offers the features available in Proxmox. If you want to use a cluster, please...
-
MMalavudeen replied to the thread Windows Failover Cluster.I currently have NFS shared datastore LUNs and I’m trying to build a Windows HA / Failover Cluster environment without using iSCSI, since I do not have an iSCSI infrastructure available in my environment. My main question is: Is it possible to...
