Latest activity
-
Rravem0n replied to the thread [Solved] After update from 9.1.6 to 9.2.3, Nothing shows under Datacenter.I found the issue. When I updated proxmox, it also updated the truenas proxmox plugin which changed a ton of options on one of my mounts. Pretty much reran the configurator for my iscsi mount and it fixed it. Thanks for all the help all!
-
JJ-Rod replied to the thread Proxmox VE Ceph Compatibility with Dell PERC H965i on PowerEdge R670.I am not sure exactly where the issue lies, but here are some things to consider: - SSDs need to be proper enterprise grade with PLP so that they will acknowledge writes once they land in DRAM cache, rather than the flash. Provide the SSD model...
-
Ddung.pm replied to the thread Proxmox VE Ceph Compatibility with Dell PERC H965i on PowerEdge R670.I’m using 10 GbE for the Ceph network and SATA III SSDs, so this setup is not high enough for Ceph ?
-
Ppacketmonkey replied to the thread [SOLVED] Network Devices Renamed after apt upgrade & power outage - Can't connect to the network.Gremlins. Obviously
-
Ppacketmonkey reacted to sdsys's post in the thread [SOLVED] Network Devices Renamed after apt upgrade & power outage - Can't connect to the network with
Like.
I'm a bit flabbergasted. Unplugged the server and shut off the power supply itself, waited about 15 minutes, tried again - devices all have appropriate names. I undid the changes I made in /etc/network/interfaces and rebooted, and we are back... -
YYupokoli replied to the thread NVIDIA GPU hardware passthrough for a LXC of Jellyfin on Proxmox 9.2.2.bump... I am also trying to passthrough a nvidia gpu (RTX 3050) but all of the guides seem to be outdated now.
-
Ddung.pm replied to the thread Proxmox VE Ceph Compatibility with Dell PERC H965i on PowerEdge R670.Thanks for the details. I checked the Ceph recommendations and also Proxmox documentation, and the H965i doesn’t seem to be a recommended Ceph controller, especially since it only offers Non-RAID mode and not a true IT/HBA mode...
-
Ddung.pm replied to the thread Proxmox VE Ceph Compatibility with Dell PERC H965i on PowerEdge R670.Thanks, I’ll apply those changes in pg to 512, and check the results later.
-
Ddung.pm reacted to waltar's post in the thread Proxmox VE Ceph Compatibility with Dell PERC H965i on PowerEdge R670 with Like.
Ceph sets you back a quarter of a century even with this nice new hosts - look at your 8K random MiB/s figures. Switching to HBAs instead of the H965is won't improve things either, because it’s the communication between the hosts that generates...
-
Ddung.pm reacted to Francois Baillargeon's post in the thread Proxmox VE Ceph Compatibility with Dell PERC H965i on PowerEdge R670 with Like.
Is the PERC H965i considered suitable for Ceph when using Non-RAID/JBOD mode? No Does this controller introduce any hidden overhead or caching behavior that could impact Ceph performance? Yes, latency is higher Are there any recommended driver...
-
Ddung.pm reacted to aderumier's post in the thread Proxmox VE Ceph Compatibility with Dell PERC H965i on PowerEdge R670 with Like.
your pg number seem quite low, it could impact write performance with pg_lock. try to set pg target ratio to 1.0 in your ceph pool Also, verify in your bios that your server is set to max performance profile. (you want cpu always at their max...
-
Sskybolt_1 replied to the thread Random crashes without logs - kdump doesn't appear to be working.Yes, I just pulled the drives and checked them with Samsung Magician, they are both at the latest release. These are consumer drives, one is an 850 EVO, the other is an 840 EVO. They are only used for the PVE OS, all of my active workloads are on...
-
Bbepstein111 posted the thread Everything working after power outage except one VM which lost internet connection. Different from the other similar issue. in Proxmox VE: Networking and Firewall.Hi all, very confused here: Today my power went out due to the heat, and when it came back on, everything on my proxmox instance looks fine, except for one single VM (which is identical to three others which are all fine) which can no longer...
-
-
JJeremy E replied to the thread [SOLVED] Unable to access web interface after installing NUT.Frak me, I just restarted Chrome and it's working... guess it was Chrome's fault... weird since every other tab was working a-ok.
-
JJeremy E posted the thread [SOLVED] Unable to access web interface after installing NUT in Proxmox VE: Installation and configuration.I have a (home) PVE node running for a few months and must say it is fantastic! (And, I'm so grateful that it's free.) Yesterday I connected the UPS powering it, my gateway and NAS to this node via USB and installed nut... ever since then I've...
-
Oomueller replied to the thread Additional confirmation: guest disk EIO / MariaDB InnoDB failures with Proxmox 7.x host kernel, mitigated by booting 6.17.13-13-pve.A quick confirmation that booting to Linux host 6.17.13-14-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.13-14 (2026-06-23T12:24Z) x86_64 GNU/Linux apparently fixes the issue for now. (manual kernel selection in Grub on boot). I would still be very...
-
Eebiss reacted to fiona's post in the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now with Like.
Hi @Drthrax74, please try downgrading the VirtIO-win drivers. See: https://pve.proxmox.com/wiki/Windows_VirtIO_Drivers#0.1.285:_VirtIO_SCSI/VirtIO_Block:_Read_errors_and_performance_issues_with_IO-heavy_Windows_Server_2025_VMs
-
Oomueller replied to the thread Additional confirmation: guest disk EIO / MariaDB InnoDB failures with Proxmox 7.x host kernel, mitigated by booting 6.17.13-13-pve.Hi, Just a +1 from my side, forum post discovered thanks the error messages. Latest no-subscription PVE 9.2.3 with kernel, 7.0.12-1-pve, single node mode, data on an encrypted LUKS partition, VM = latest Ubuntu LTS 24.04.4, mariadb...
-
news replied to the thread Proxmox VE Homeserver, ZFS, AMD Mainboard B550, AMD Ryzen 7 PRO 4750G.Wenn, dann einem Ryzen PRO 5 5650G, der ist neuer als die Ryzen PRO 4000 Serie und mit seinen 6C/ 12T kann man vieles Anstellen, auch HT deaktivieren um weitere ca - 40% Leistungsaufnahme einzusparen. Dann laufen halt die Prozesse 40% länger in... -
bbgeek17 replied to the thread [Solved] After update from 9.1.6 to 9.2.3, Nothing shows under Datacenter.I would review the upgrade logs/output, if still available, for any errors. I would then reboot the server and closely review the logs starting from fresh boot, both journalctl and /var/log/pve/* I would also run: - dpkg -V - apt install debsums...
