Latest activity
-
SSupaman replied to the thread New proxmox install with old drives.Problem: the VM config file and the VM disks are stored on different places. since your OS dis kist lost, those config files are lost. you can mount the disks with VMs manually via shell, but you need to recreate the VM config files, because...
-
GGilberto Ferreira replied to the thread VLAN created inside SDN panel not appears in NODE -> SYSTEM -> NETWORKS?.Well... It's seems that I need to create the vlan on each node, like vmbr1.90, and than use fabric to connect all nodes using the vlan vmbr1.90. In this scenario, is working.
-
Aargjerryl replied to the thread Can't access my proxmox server URL (SOLVED).Okay I understand now, i'll re-IP my PVE so that it falls under 192.168.1.0/24. I'll get back here soon as possible. Thank you for the support @bbgeek17 and @leesteken!
-
BBlecherer reacted to bbgeek17's post in the thread Possible regression in PVE 9.2.3: owner = VM when migrating ISO attached as media=disk with
Like.
I would say there is definitely a problem in the logic here. The ISO cannot be "owned" by the VM, its a shared object. The reason its "VM" is due to failing to determine the owner's ID and the ID value not being set. Historically you would get... -
bbgeek17 replied to the thread Can't access my proxmox server URL (SOLVED).As @leesteken mentioned, your existing subnet is different from the one you used on the PVE. You need to re-IP your PVE to place it in 192.168.1.0/24. Pay particular attention to your existing DHCP ranges to avoid further conflicts Blockbridge... -
Aargjerryl replied to the thread Can't access my proxmox server URL (SOLVED).What is the IP of your workstation? [jerryarg@fedora]~% ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo...
-
bbgeek17 replied to the thread Can't access my proxmox server URL (SOLVED).Hi @argjerryl , welcome to the forum. What exact URL are you trying to access and what is the exact error you are receiving? Could you answer these questions please: What is the IP of your workstation? Can you ping the PVE server? Can you ssh...
-
Aargjerryl posted the thread Can't access my proxmox server URL (SOLVED) in Proxmox VE: Installation and configuration.Hi everyone, new to using proxmox. I dual booted my old computer now in the process of being setup as the homelab I went through the inital setup process. I tried accessing it the URL but my computer doesn't seem to pick up on it. I assume it's a...
-
-
GGilberto Ferreira posted the thread VLAN created inside SDN panel not appears in NODE -> SYSTEM -> NETWORKS? in Proxmox VE: Networking and Firewall.Hi... I have a VLAN named 90. In this VLAN I have had created this: pmx01:~# cat /etc/pve/sdn/zones.cfg vlan: vlan90 bridge vmbr1 ipam pve mtu 9000 pmx01:~# cat /etc/pve/sdn/vnets.cfg vnet: vnlan90 zone vlan90...
-
JJohannes S reacted to Impact's post in the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar with Like.
Ist unter Mount options zu finden. Ich würde aber den Cronjob mit pct fstrim aus meinem Snippet empfehlen. Ich empfehle nach wie vor ZFS. Ja auch auf consumer Hardware. Mit purem LVM kannst du (ohne zuvor erwähnte volume chain) nicht mal...
-
JJohannes S replied to the thread Subscription costs (rant).https://proxmox.com/en/partners/find-partner/all/filter/regions-filter/regions/north-america has a list although it might not be completlly uptodate. For an uptodate list one could contact office@proxmox.com
-
bbgeek17 reacted to alexskysilk's post in the thread Proxmox stuck after upgrade from 8.4.19 to 9.x with Like.
I've run into this issue multiple times in the past. IF you have linux kernel 6.1 in your available kernels to boot, you can live with it and just pin that kernel. Going forward, you should consider upgrading your motherboard to something from...
-
Aalexskysilk replied to the thread Proxmox stuck after upgrade from 8.4.19 to 9.x.I've run into this issue multiple times in the past. IF you have linux kernel 6.1 in your available kernels to boot, you can live with it and just pin that kernel. Going forward, you should consider upgrading your motherboard to something from...
-
bbgeek17 replied to the thread Possible regression in PVE 9.2.3: owner = VM when migrating ISO attached as media=disk.I would say there is definitely a problem in the logic here. The ISO cannot be "owned" by the VM, its a shared object. The reason its "VM" is due to failing to determine the owner's ID and the ID value not being set. Historically you would get...
-
HHallo, habe mir per Helfer Skript die Software Kimai installiert - alles super geklappt Nun wollte ich ein Plugin zusätzlich in Kimai installieren doch leider existiert der Plugin pfad nicht wie in der Doku beschrieben...
-
Aalexskysilk replied to the thread Ceph with mixed hardware and disks.It depends on your performance expectations, but ceph is quite capable to deal with this kind of mixed hardware- as long as you make sure that you have EQUIVALENT CAPACITY PER OSD TYPE on each osd server. In your case, assuming you want all 6...
-
Bbl1mp reacted to UdoB's post in the thread [SOLVED] Cant access Proxmox GUI thru a Wireguard site to site tunnel with Like.
...and possibly vice versa on the other end.
-
Bbl1mp reacted to guillaume14's post in the thread [SOLVED] Cant access Proxmox GUI thru a Wireguard site to site tunnel with Like.
Me again ... Looks like a need to add a route for the "Wireguard Transfer Net" (10.2.2.0/24 in my setup) to gain access to the Proxmox server: ip route add 10.2.2.0/24 via 192.168.37.254 Regards Gullaume
-
Bbl1mp replied to the thread Ceph with mixed hardware and disks.Hi AllYourSmurf if you are able to do so, you should distribute your nvmes more equally across, the nvme nodes or even better across all nodes. With the current distribution only 3TB of your NVME-Storages will be usable (with the default 3-2...
-
Aalexskysilk replied to the thread Subscription costs (rant).Some of the bigger names in the European list provide follow the sun support and can be engaged adhoc with 4 hour minimum charges. Not really familiar with any US based vendors but they probably exist; you'll need to reach out to a bunch of them...
