Latest activity
-
JJohannes S reacted to bbgeek17's post in the thread RHEL 7 VM MIGRATION FROM IBM POWER TO PVE 8.3 with
Like.
I don't think there is one for this conversion. I believe this is your only path. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
JJohannes S reacted to Falk R.'s post in the thread Aruba Clearpass Vmware zu Proxmox Migration - VM bootet nicht with Like.
Klingt aber noch nicht nach Perfekt. IDE und KVM64 limitieren schon stark. Ich habe auch schon mal so eine VM migriert, weiß aber die Einstellungen nicht mehr aus dem Kopf und weiß auch nicht mehr bei welchem Kunden. Wenn eine Appliance nicht mit...
-
JJohannes S reacted to LnxBil's post in the thread Aruba Clearpass Vmware zu Proxmox Migration - VM bootet nicht with Like.
Jo, da steckt wohl ein RHEL-basiertes OS drin und du musst mittels dracut das initrd neu bauen. Am Besten vor der Migration schon das Image neu bauen, dass alle Treiber integriert werden und nicht nur die, die auf der VMware-Kiste benötigt...
-
Eellileon replied to the thread Aruba Clearpass Vmware zu Proxmox Migration - VM bootet nicht.Ich hatte die sachen alle ausprobiert. Vmware Controller mit vmxnet usw...das hat alles leider nicht funktioniert in jeglichen Kombinationen. Nur mit den ide Platten zusammen mit dem kvm64 Prozessor ging es dann
-
Eellileon reacted to Falk R.'s post in the thread Aruba Clearpass Vmware zu Proxmox Migration - VM bootet nicht with Like.
Klingt aber noch nicht nach Perfekt. IDE und KVM64 limitieren schon stark. Ich habe auch schon mal so eine VM migriert, weiß aber die Einstellungen nicht mehr aus dem Kopf und weiß auch nicht mehr bei welchem Kunden. Wenn eine Appliance nicht mit...
-
shanreich replied to the thread SDN VLAN VNets no longer work after an update from 9.1.9 to 9.2.2.We recommend to not run Docker alongside Proxmox for that exact reason. Either use the newly introduced OCI feature [1] or run docker inside a VM. [1] https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_open_container_initiative_oci_images -
CCookiefamily replied to the thread SDN VLAN VNets no longer work after an update from 9.1.9 to 9.2.2.Yup that did the trick... wow o_O Thats... mildly inconvenient. We usually need docker as some monitoring checks run inside a docker container. At least we now know where the issue lies, not sure yet how to fix that...
-
JTwo main points I want to highlight specifically here. 1. as a supporting entity with your own client base, you should be taking on the role of first party support if you are going to linecard with Proxmox. It is the professional and responsible...
-
Ddeebsr replied to the thread PVE Native Install of Grafana Alloy Client.I'm curious about the guidance from someone from Proxmox itself on this. Is this advisable? can it scale? We are looking to also possibly use Alloy but we are a much bigger environment than a home lab. It would be nice if there was a built in...
-
shanreich replied to the thread SDN VLAN VNets no longer work after an update from 9.1.9 to 9.2.2.Does it work if you remove docker from the host? It is known to interfere with networking on a PVE host, so I suspect that it might have something to do with the firewall rules it creates on the host.
-
CCookiefamily replied to the thread SDN VLAN VNets no longer work after an update from 9.1.9 to 9.2.2.sure, here is the output: root@node01:~# cat /etc/network/interfaces.d/sdn #version:2 auto v0074 iface v0074 bridge_ports vmbr0.74 bridge_stp off bridge_fd 0 root@node01:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue...
-
Aalucard1238 replied to the thread Kubernetes overlay networking breaks when upgrading from PVE 9.1 to PVE 9.2.3.Hi guys, just a quick note to say thanks to everyone here. We hit the exact same issue on an OKD cluster (cross-host pod/service traffic breaking on PVE 9.2.3 / pve-qemu-kvm 11.0.0-4), and switching the affected VMs to machine type pc-q35-10.1...
-
Jjames_h replied to the thread ZFS Pool Partition Lost at Reboot.oot@pve-1:~# lsblk -o+FSTYPE,LABEL,PTTYPE,MODEL NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS FSTYPE LABEL PTTYPE MODEL sda 8:0 0 894.3G 0 disk gpt MZ7KH960HAJR0D3 nvme0n1...
-
shanreich replied to the thread SDN VLAN VNets no longer work after an update from 9.1.9 to 9.2.2.Can you additionally add the output of the following commands? cat /etc/network/interfaces.d/sdn ip a
-
CCookiefamily replied to the thread SDN VLAN VNets no longer work after an update from 9.1.9 to 9.2.2.I needed to set up a new cluster anyway for some testing and I managed to reproduce the issue. This time I used normal Linux Bridges from the start and not OVS Bridges, same result. This is the network config: # network interface settings...
-
Wwillybong replied to the thread Ceph rbd mirror force promote.Hello, any update on it?
-
J_--James--_ replied to the thread Subscription costs (rant).Two main points I want to highlight specifically here. 1. as a supporting entity with your own client base, you should be taking on the role of first party support if you are going to linecard with Proxmox. It is the professional and responsible...
-
AAB-256 posted the thread New proxmox install with old drives in Proxmox VE: Installation and configuration.Hello All, I am reaching out because I ran into an issue were my main drive running the proxmox os has become corrupted. I have made a new proxmox install on a new drive but now I need to connect my storage drives with my VMs. I see the drives...
-
Falk R. replied to the thread Aruba Clearpass Vmware zu Proxmox Migration - VM bootet nicht.Klingt aber noch nicht nach Perfekt. IDE und KVM64 limitieren schon stark. Ich habe auch schon mal so eine VM migriert, weiß aber die Einstellungen nicht mehr aus dem Kopf und weiß auch nicht mehr bei welchem Kunden. Wenn eine Appliance nicht mit... -
J_--James--_ replied to the thread Subscription costs (rant).I think one of the things that would help with the community support tier is to rename it to "basic" support and highlight that the primary support method is via the support forum, and stop calling it community support. Because, quite frankly...