Latest activity
-
Iitamarbudin replied to the thread Proxmox + Older NVIDIA GPUs (GTX 1060 / P4000 / V100) LXC Passthrough Guide (Updated June 2026).You're welcome :) The problem is that when you are using a passthrough, the kernel driver might be blocking you from installing the driver. see here: https://forum.proxmox.com/threads/unable-to-load-the-kernel-module-nvidia-ko.89428/
-
Cc0lpan1c reacted to Antics04's post in the thread [SOLVED] No /boot after PVE 8 to 9 upgrade with
Like.
Since I didn't get any responses here, I asked chatgpt and eventually got it worked out. I want to post my fix in case anyone else comes across the same problem. So my sdd had a 1G partition that used to be /boot/efi (sdd2) but was somehow... -
Cc0lpan1c reacted to Antics04's post in the thread [SOLVED] No /boot after PVE 8 to 9 upgrade with Like.
My Proxmox host boots to BIOS after upgrading from PVE 8 to 9. I was able to use Rescue Boot from a Proxmox 9 install USB but it says /boot not found. In Rescue Boot, everything else seems to be working fine though. I've only been using...
-
Cc0lpan1c reacted to dan_polidori's post in the thread [SOLVED] No /boot after PVE 8 to 9 upgrade with Like.
Man can I just say a massive thank you for posting this. Same issue and finally found your article which resolved my issue.
-
Cc0lpan1c replied to the thread [SOLVED] No /boot after PVE 8 to 9 upgrade.Issue still exists on 6.20.26, I have 5 nodes, all worked swimmingly except my one node. Basically stuck in a reboot loop after 8.4 to 9.2 upgrade. I had to do a boot override and select a different partition (not uefi proxmox), and was let...
-
Rrisner replied to the thread Proxmox on aarch64 (arm64).VMWare on Arm has been a thing since 2020. At that time, I believe it was RPI only. https://www.storagereview.com/news/vmware-esxi-arm-fling-announced I'm kinda puzzled why they would continue to create it, but maybe they view it as a revenue...
-
Aadofou replied to the thread Memtest as default rEFInd option after upgrade to PVE 9.2.Hello, I encountered the same problem after updating to Proxmox 9.2, whereas in Proxmox 9.1 the issue doesn't occur. Since this happened on two different machines, with two mothercard series, I used IPMI to try to figure out what rEFINd was...
-
Bbosswaffle replied to the thread PVE 9 and iDRAC service module dcism.I did something similar, I downloaded the Ubuntu idrac service module for a r650 from dells support website and grabbed the OSC.deb and dcism.deb file to install on my servers (a mix of r640s and r650s). After enabling and starting dcismeng via...
-
Llaxarus posted the thread [SOLVED] New LE YE1 CAs not trusted, causing PBS connection to be lost in Proxmox Backup: Installation and configuration.Hi, I have a pretty stable system. My PBS instance never gave me a problem until my certs got renewed. I have noticed this later that on my proxmox cluster, I have lost connection with PBS. Inspecting further, my new certs used the new LE CA YE1...
-
BI was able to install on PVE9. I get Systems-Management_Application_WMJ1N_LN64_5.4.2.0_A00_02.BIN from Dell, extracted and installed dcism-5.4.2.0-4048.ubuntu24.deb and dcism-osc-7.4.2.0-221.ubuntu24.deb No error given and after that i simply ask...
-
RRon Gage posted the thread Trying to join a new 9.2 node to an existing cluster - failing in Proxmox VE: Installation and configuration.Greetings from Detroit. I am trying (unsuccessfully) to join a new 9.2 node to an existing cluster. The new node (pv01) ends up in a state that I can't recover from: web interface won't let me log in and the join - while not erroring out, at...
-
AAaronCOW reacted to Huamijo's post in the thread [SOLVED] PVE 8 (debian 12) (kernel 6) , Dell T330 iDRAC 8 iDRAC Service Module (iSM) with Like.
if your's is a PowerEdge too, this might work. https://www.dell.com/support/home/de-de/drivers/driversdetails?driverid=mmvdg&oscode=ubs22&productcode=poweredge-t350...
-
JJohannes S reacted to UdoB's post in the thread SPICE client "virt-viewer" noch immer empfohlen? with Like.
Sieht so aus. Leider. Dasselbe gilt dann wohl für x2go - das hatte ich gerade in https://forum.proxmox.com/threads/neuling.184448/post-858382 erwähnt. Wie baut man heute einen (Linux-) Terminalserver? Das klassische LTSP...
-
Bbrnogu replied to the thread VM freezes when passthrough RTX 3080 to Windows 11 on Proxmox 9.2.3.Ok I found a temporary fix. Reverting to kernel 6.8.12-30-pve from 7.0.12-1-pve fixed the problem. Is this a known issue?? A memory dump check suggests that IPIs are not being received/acknowledged by the target vCPU. Can this be the same as...
-
JIch mache übrigens gerade mal wieder Experimente mit x2go (https://wiki.x2go.org/doku.php), auch wenn ich den Eindruck habe, dass dies nicht mehr weiterentwickelt wird. Für Linux-Desktops und zum "freigeben" von einzelnen Applikationen (wie einem...
-
JJohannes S reacted to meyergru's post in the thread [Community project] Proximo — an open-source, least-privilege MCP/API layer for managing PVE with an AI agent (feedback wanted) with Like.
Thanks for sharing your project here. I appreciate that you openly state this is a human+AI hybrid project. However, looking closely at the concept, the GitHub profile, and the architectural choice, I see three potential scenarios here—all of...
-
TTErxleben replied to the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar.Also dein Platz auf / sieht nun völlig unproblematisch aus. Ich würde nun die virtuellen Kisten sichern und die Rücksicherung auf Funktionsfähigkeit kontrollieren. Dann würde ich auf der 128er das System mit Installationsvoraben (nur bei CPU...
-
UdoB reacted to meyergru's post in the thread [Community project] Proximo — an open-source, least-privilege MCP/API layer for managing PVE with an AI agent (feedback wanted) with Like.
Thanks for sharing your project here. I appreciate that you openly state this is a human+AI hybrid project. However, looking closely at the concept, the GitHub profile, and the architectural choice, I see three potential scenarios here—all of... -
Ffabian69420 replied to the thread [SOLVED] Can't get Nvidia GPU passthrough to work on LXC.hey thanks for this script, it seems rlly helpful. but it unfortunatly didnt work for me. when i try to add the GPU to the LXC it gives me this: and when igo to install the drivers on host through the option on the menu, it acts like it's...
-
-
UdoB replied to the thread SPICE client "virt-viewer" noch immer empfohlen?.Sieht so aus. Leider. Dasselbe gilt dann wohl für x2go - das hatte ich gerade in https://forum.proxmox.com/threads/neuling.184448/post-858382 erwähnt. Wie baut man heute einen (Linux-) Terminalserver? Das klassische LTSP...
