Found several instances (in 8.* and 9.1) with unstable SDN environment. Updated my environments to 9.2, hope it gets better.
Born from the troubleshooting session: https://github.com/ciroiriarte/pve-tools/blob/master/pve-sdn-healthcheck
Hope it...
zfs belastet deine HW immer mehr, als ein ext4 Basissystem. Mit nur einer NVMe ist es sogar recht sinnlos und eher Karusselbremser. Wenn unbedingt gewünscht, verpasse einzelnen VMs ein zfs.
Sorge penibel für einen passende DATENSICHERUNG der VMs...
The commented out lines are variations I have tried out without success (e.g. server pve 192.168.0.10:8006 ssl verify none)
I used NGiNX Proxy Manager before switching to HAProxy which worked with SSL to Proxmox.
I removed all http-request...
Hi @mahgup95 , welcome to the forum.
You can start with https://pve.proxmox.com/wiki/Deploy_Hyper-Converged_Ceph_Cluster
There are also many other resources that may be helpful, including Youtube video guides if you are a visual learner.
PVE...
Hi,
i have 4 servers with same resources in each.
I am planning to configure CEPH for Storage.
Kindly share guidelines for confguring.
Is any license is required for doing cluster CEPH and HA
In that report OP posted:
“iops-hunter
on Nov 9, 2025
Author
I just edited my post - it's no longer true that this problem is limited to WS2025 only. I found other user report on Proxmox forums, where the same bad behavior (0.1.285+) was...
ich kann mir nicht vorstellen, dass das mit dem ursprünglichen Problem zu tun hat.
Da ist sicher nicht der Linuxkernel oder die Kommunikation über USB schuld.
Die USV meldet auch bei mir immer mal so Sachen, die nicht ganz richtig sind.
Das...
Hi,
You miss this important step:
1. Test your new Hdd device:
- run in paralell, smartctl -t long, and a badblock test for at least 3 days
Without this, you may lose your time !
Good luck / Bafta !
I decided to upgrade to PVE 9 and have made a mistake along the way.
My boot disk is running ZFS so the host is using systemd-boot and proxmox-boot-tool. I did not remove systemd-boot before the upgrade so after upgrading I am on PVE 9.2.3 with...
I believe this answer is missing one bit of information. The pool has to have a special flag active, see the zfs docu. The script under /usr/lib/zfs-linux/trim might exit if org.debian:periodic-trim is disabled
here is the related part from that...
In my homelab I use an overlay Network VPN ( tailscale as Client together with headscale on a vserver, netbird would be another option). I prefer this to Reverse proxys ( Like Pangolin which aims to be an opensource clone of cloudfare tunnels)...
Hi @bfoss ,
The first three commands are fine in the order you listed. The last command is both unnecessary in the PVE context and looks suspect.
If you lost power, then on hard boot the OS likely recognized the new size and that allowed you...
Zu früh gefreut...
Jetzt sagt apcupsd dauernd, ich müsse die Batterie wechseln. Ich habe eine neue UPS bekommen, weil die andere UPS einen Defekt hatte. Das Ding ist also quasi neu. Wenn ich das PowerChute auf einer Windows VM laufen lasse...
Thanks folks i got it to work finally really appreciate the help, couldn't respond yesterday as i lost power at my home office. Have a few follow up ?'s on the proper order of what i believe made it work below are the command that i ran...
Hi,
I make packup vms on PBS datatore, but i have errors when i run job :
ERROR: VM 104 qmp command 'backup' failed - backup connect failed: command error: Input/output error (os error 5)
INFO: aborting backup job
INFO: stopping kvm after backup...