Latest activity
-
BBujar Lushta replied to the thread [SOLVED] Proxmox VE 9.1 & Broadcom BCM57412 10G SFP Dual Port PCIE adapter.Hi everyone, I was wondering if problem got solved, if so, can you please show what actions you took. Thank you bujar
-
DdbHA reacted to bbgeek17's post in the thread [SOLVED] Host unable to connect to internet/LAN after power outage with
Like.
Hi @dbHA , welcome to the forum. As you can see from your /etc/network/interfaces the VMBR0 port is backed by enp1s0. However, as your "ip link" shows this interface name no longer exists. Most likely you had pending Kernel update that got... -
DdbHA replied to the thread [SOLVED] Host unable to connect to internet/LAN after power outage.Thanks. I tested with a laptop and the cable and dongle both work. What should I look into the BIOS/Firmware for? The USB-C dongle's name is enxa0cec89ccfa9. I ran ethtool enxa0cec89ccfa9 and it returned To use the dongle, would I replace...
-
-
BBujar Lushta replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.Hi Gabriel, Thank you for your post, I was wondering if any other problems have been documented with Broadcom BCM57508 NetXtreme adapters, any other offloading functionalities that cause compatibility issues? In advance thank you. Bujar
-
AAntonJ reacted to Philipp's post in the thread Proxmox Virtual Environment 9.2 available! with Like.
Migration from VMware ESXi 8.0.3 to PVE 9.2.2 was going smoothly. The import wizard is doing a great job. Attention: VEEAM Backup 13.0 doesn't like Proxmox VE 9.2.x, this is an unsupported environment! I learned this today from the VEEAM support...
-
BBujar Lushta replied to the thread bnx2x Network Card Driver stopped working (NetXtreme II BCM57810 10 Gigabit Ethernet NIC).Hi FlashNet, I was wondering if you solved the problem is the past, I am experiencing the same problem. In advance thank you. Bujar
-
Aanna_pve_berlin replied to the thread [SOLVED] Host unable to connect to internet/LAN after power outage.If the onboard RJ45 has no link LED at all, I would separate two things: first check BIOS/firmware and the switch port/cable once more, because no carrier usually points below Proxmox. For the USB-C dongle, it will probably have a different...
-
FFingerlessGloves posted the thread Memory hot plug initial memory allocation in Proxmox VE: Installation and configuration.I've been trying to workout why with Memory Hotplug enabled, I can not PXE boot a distro installer, even if I have 16GB of memory set with no ballooning. Soon as I turn off hotplug it works no problem. I've tried adding...
-
BAh, ich verstehe nun besser, danke! Bin dabei, Dashboards entsprechend zu adaptieren und sehe bereits Fortschritte. Ja, wirklich seltsam, dass da nur wenige Dashboards "am Ball" bleiben.
-
JJns62Xya posted the thread Win11 Disk Performance Problems | VirtIO SCSI + Discard + IO Thread in Proxmox VE: Installation and configuration.Hi! i have some performance problems with a (the only one) windows 11 vm on my Proxmox VE! Totaly slow disk reads. Starting Programs is to slow for the underlaying hardware (my feeling...) I've tried cache=writeback, ssd=0/1 etc... Host: -...
-
-
bbgeek17 replied to the thread [SOLVED] Host unable to connect to internet/LAN after power outage.Hi @dbHA , welcome to the forum. As you can see from your /etc/network/interfaces the VMBR0 port is backed by enp1s0. However, as your "ip link" shows this interface name no longer exists. Most likely you had pending Kernel update that got... -
Ssgw replied to the thread Wie downgrade virtio 1.285 auf 1.271?.Ah, ich verstehe nun besser, danke! Bin dabei, Dashboards entsprechend zu adaptieren und sehe bereits Fortschritte. Ja, wirklich seltsam, dass da nur wenige Dashboards "am Ball" bleiben.
-
DdbHA posted the thread [SOLVED] Host unable to connect to internet/LAN after power outage in Proxmox VE: Networking and Firewall.After a power outage (tripped circuit breaker) my mini-pc won't connect to the internet or the local network. I noticed that the RJ45 port on the Minisforum is not lighting up. I tested both the ethernet cable and internet connection, that's not...
-
-
BBu66as replied to the thread Wie downgrade virtio 1.285 auf 1.271?.Das Problem ist nicht der fehlende Collector an sich, sondern dass deine Dashboard-Variable (die Instance-/Host-Auswahl) auf einer cs_-Metrik aufsetzt, die es nicht mehr gibt. Wenn die Template-Query wie label_values(windows_cs_hostname...
-
TBonjour All, I have been fiddling with PDM, and I want to sync it to our LDAP servers. Now here's a fun one : those things are running an OLD ldap tree imported over generations of VMs, meaning we can't use memberOf. I can get my list of users...
-
-
Mmarkus_2026 replied to the thread PBS 1.1-1 mit LTO-4 fix downloadbar?.Das ging aber zügig. Vielen Dank für den Link und die Hinweise.
-
Aatlas32 posted the thread VLAN-aware bridge vs traditional bridge with vlan interfaces — which one for a mixed workload cluster? in Proxmox VE: Networking and Firewall.Hi all, I'm setting up a new 3-node PVE 8.x cluster and I'm going back and forth on the networking design. Hardware is generic 2x10GbE per node, LACP bond to a pair of stacked switches. I need to host VMs in roughly 12 different VLANs (mix of...
-
FFingerlessGloves reacted to sterzy's post in the thread PDM 1.1.1 unable to add AD realm with anonymous search with Like.
Hm yeah, it seems that our Rust code is a bit stricter here. The Perl variant only checks if a connection can be established, while the Rust code does try to carry out an actual search. Since the search requires a bind, adding the realms fails...
-
AHello everyone, There exists the possibility to define HA state on templates for VM resources within Proxmox environments. When doing so the HA manager tries to implement the HA state according to the configuration defined. In case of the HA...
-
-
FFingerlessGloves replied to the thread PDM 1.1.1 unable to add AD realm with anonymous search.I can connect using anonymous bind to the same server in Proxmox VE, with no bind user required. I'm trying to connect PDM to the same AD servers specified in PVE. I have users logging in using the Windows AD realm just fine too on PVE...
-
