Latest activity
-
TTErxleben replied to the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine.Schön, dass du die wichtigen Daten sichern konntest. Ich würde die neue VM aber gleich auf dem neuen 9er aufbauen.
-
Rrprengel replied to the thread Benchmark für Windows-VMs gesucht.Das lohnt sich sofort wenn Kunden / Mitarbeiter reklamieren und man das gleiche Verhalten in seinen Metriken sieht. Oder halt auch nicht und sich sicher sein kann das man das Verhalten sehen würde. Gruß
-
fiona replied to the thread Live Migrations get slower over time.Hi @mirko.plachta, please provide more details about your setup and the information asked for in my previous post. Do you have KSM enabled for the affected VMs and if yes, how much memory is shared? -
bbgeek17 replied to the thread Upgrade PVE 8 to 9 but without kernel 7.0.If your current systems are working to your satisfaction, perhaps you should not rush into an upgrade. If you are upgrading to a new family of the hypervisor (8 to 9) be aware that the 9 is likely not explicitly tested with 6.x Kernel any more... -
Sseverferdi replied to the thread The uptime and reboot information for LXC containers is retrieved from Proxmox VE..Thank you j.theisen. Reinstalling the LXCFS service inside the container seems to have resolved the issue. I think it was a problem with the LXCFS service itself.
-
Cchralt replied to the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine.Ich habe es nun endlich geschafft mittels Live-System den Ordner /var/lib/mysql von der VM zu sichern, ich hoff das reicht nun um den Server neu aufzubauen. (Warum das bei früheren Versuchen nicht gelungen ist? Fragt bitte nicht. Muß an...
-
TTaledo replied to the thread CEPH & ZFS Using a PERC H755n.Hey there. Thanks for the reply! Agree, I'd like to bypass the PERC altogether and get a similar system to the R740XD I've got running my PBS, and connect the back plain straight up to the motherboard via PCIe risers. Issue is: I don't think...
-
TTErxleben replied to the thread Benchmark für Windows-VMs gesucht.Es geht aber nicht um Simulation sondern Protokollierung. Das macht ein PVE für die wichtigsten Werte schon von Haus aus. Diese Werte weiter aufzudröseln, ist Augenwischerei und lohnt den massiven Aufwand für schnöde ArbeitsVMs nicht.
-
Ccurruscanis replied to the thread Encrypted backup of only one VM fails, but non-encrypted works fine.I get the following error with that path: root@yscdtpbs:/mnt/dtsynlun2/.chunks/55be# proxmox-backup-debug inspect chunk /mnt/dtsynlun2/.chunks/552b/552bef595b29e12e35478064ddf764383b8f593dadc606df538dbed7bd0407df Error: Data blob has wrong CRC...
-
Ggkovacs replied to the thread Upgrade PVE 8 to 9 but without kernel 7.0.Thanks, but as this cluster is still on PVE 8.x, there is no 6.17 (or whatever was the latest branch before 7), so I reckon I could only pin the current 6.8 kernel - probably not ideal for PVE 9, right?
-
Ssunnystew22 replied to the thread No internet in new LXCs.Well, my MacGyver trick worked just fine, will try your solution though.
-
bbgeek17 replied to the thread Promox inside Hyperv for testing API.You can/should change Proxmox to use a static IP and place it on such network in HyperV that allows it. There is also some discussion here, albeit it may be outdated...
-
bbgeek17 replied to the thread Upgrade PVE 8 to 9 but without kernel 7.0.Hi @gkovacs , you can pin a specific Kernel version: https://pve.proxmox.com/wiki/Host_Bootloader#sysboot_kernel_pin Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Ggkovacs posted the thread Upgrade PVE 8 to 9 but without kernel 7.0 in Proxmox VE: Installation and configuration.I'm about to upgrade a small cluster from PVE 8 to 9, but want to hold off on kernel 7.0 for now. As I can see the current 9.2 release includes kernel 7.0 as a default, so I presume the in-place upgrade would install that now. Are there any ways...
-
Vvirmix posted the thread Promox inside Hyperv for testing API in Proxmox VE: Installation and configuration.I want to test Promox API, but I not have one server to create this sandbox and Promox-Website not have this option. The only way that I know is create VM in HyperV and setup Promox inside. This work fine, but after Hyperv reboot the default ip...
-
PPato_77 posted the thread [SOLVED] System Log - Live Mode stopped working in Proxmox VE: Installation and configuration.Hi all, Since yesterday, 07-06-2026 12:46:26pm my node isn't showing any more new log messages in System Log (GUI) - Live Mode. It's stuck at the last massage on the date just mentioned before. I did had an error during the night regarding the...
-
Jj.theisen replied to the thread Firewall VM with network bridge with multiple different VLA configs.Hi @gernotmeyer67 thanks for posting in the forum! it's even easier ;) Just don't add any VLAN tag and put the virtual NIC of the VM on the appropriate vmbr interface. The VM can then send out Ethernet frames with any VLAN tag. Disclaimer: Of...
-
Gguruevi replied to the thread [SOLVED] Are SSD NVMe issues resurfacing with the latest PVE kernel upgrade?.One other thing I see here in common: - Samsung/WD "consumer" drives - Adapters (M2 to NVMe; SFF to U2) Also, just setting the kernel parameters to go without power management is often not enough, the EFI handles and could be overriding your...
-
SMahlzeit, ich versuche gerade für meinen PVE SSL/TLS Zertifikate zu erstellen. Hierzu habe ich unter ACME einen Account und auch ein "acme-dns" Challenge plugin angelegt. in diesem habe ich meine auf mich bei einem hoster registrierte Domain...
-
Rrprengel replied to the thread Benchmark für Windows-VMs gesucht.Das Stichwort ist syntetic monitoring. Damit simulierst du vollständige Client-Interaktion aus Sicht des Users und bekommst jede Menge Menge Metriken. Z.B. wie lange dauerte ein Login, wie schnell war eine definierte Suche oder wie schnell wird...
