Latest activity
-
Mmaxim.webster replied to the thread [SOLVED] Making best use of multiple NICs per Node.Fabrics: Did that, works like a charm. Thank you all very much.
-
TTErxleben replied to the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine.Unerquicklich. Vergleiche, ob beide PVEs über identische storages verfügt. Dann würde ich eine Sicherung auf dem alten 8er-PVE vornehmen. Diese in eine Test-VM auf dem UrsprungsPVE zurückspielen. Falls es dort funktioniert, die Sicherung der VM...
-
Jj.theisen replied to the thread OPNsense as VM inside Proxmox - no WAN access to OPNsense (Hetzner).Yes, put the main IP and gateway which are currently configured on the physical interface into the configuration on vmbr0. The PVE host doesn't need to know about the additional VM IP per se. Since you have an additional interface with a separate...
-
Gguruevi replied to the thread Glusterfs is still maintained. Please don't drop support!.From your writing, you clearly do not understand what PVE is, what qm does and to read through and disentangle it all seems like a waste of time. But qm is just a client to the PVE API (it simplifies QEMU only to a few relevant commands and...
-
Eedwin2024 posted the thread Replacement faulty HDD which is part of a ZFS data volume in Proxmox VE: Installation and configuration.Replacement faulty HDD which is part of a ZFS data volume For years i am using vmware but since the took-over by broadsoft i'm finding my way over to ProxMox. First step is running an older HPE ML30 Gen 10 (non-hot-swap) for private use. The...
-
Moayad replied to the thread Monitors, managers and MDS duplicates in GUI.Hi @Chronos.Song I would check the `/etc/hostname` and see if contains only the short node name and that it resolves correctly, then restart or reboot hte affected node. -
AAntijurist replied to the thread OPNsense as VM inside Proxmox - no WAN access to OPNsense (Hetzner).So, to be clear: I'll have to put the configuration which is now at the interface to the vmbr0 bridge (IP (main or additional? - currently main at interface) and gateway? Also the contents of comment (there is a route specified which I don't know...
-
SteveITS replied to the thread Remote sync extremely slow.Nice and frustrating find. I hate it when those old things creep in. For the initial sync, in the job's advanced settings there is a field for the number of backups of each VM to sync, as in, the last 2 backups instead of 300 for VM1, then 300... -
Ccelemine1gig replied to the thread Updated to 8.2 - DMA error.Exceptions prove the rule, I guess. I think you know what I meant to say. :)
-
CChronos.Song replied to the thread Monitors, managers and MDS duplicates in GUI.I encountered the same problem; it might be due to a duplicate short hostname with fqdn. The system is started by ceph-mds@sh-xxx-pve-test-151.service via systemd. I obtained this data from https://10.0.4.151:8006/api2/json/cluster/ceph/metadata...
-
TTErxleben replied to the thread Benchmark für Windows-VMs gesucht.ich mache es mir recht einfach und ziehe gedanklich nur 5-10% von möglichen Baremetal-Leistungen ab. Erst wenn z.B. GPUs durchgereicht werden, kann es überhaupt zur Performancesuche kommen. Wenn eine Brot+Butter-VM als langsam beschrieben wird...
-
Cchralt replied to the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine.Alle VMen sind identisch mit Bindestrichen. Wie der Punkt in die Bezeichnung gekommen ist ist mir schleierhaft.
-
Jj.theisen replied to the thread OPNsense as VM inside Proxmox - no WAN access to OPNsense (Hetzner).Yes and no. The IP configuration needs to be removed from the physical interface and re-added to the VM bridge. The host will still be accessible through this IP address, but it is then assigned to the bridge interface instead of the physical...
-
Mmaxim.webster reacted to shanreich's post in the thread [SOLVED] Making best use of multiple NICs per Node with
Like.
I'd recommend still going for the fabric, as it provides fault tolerance/failover and you have status reporting via the Web UI. it is relatively straightforward to set up and our current recommended way for full-mesh. -
AAntijurist replied to the thread OPNsense as VM inside Proxmox - no WAN access to OPNsense (Hetzner).Hi, thanks for replying. I'll check the first two thing you mentioned as soon as I can. About the brdige port: This is what I tried but it resulted in an error message: iface enp8s0 - ip address can't be set on interface if bridged in vmbr0...
-
Jj.theisen replied to the thread The uptime and reboot information for LXC containers is retrieved from Proxmox VE..Hi @severferdi thanks for posting in the forum! Can you please provide an example of such a misreported uptime? I just tried replicating this issue locally but in my case uptime delivered the correct time of the container start and not the PVE...
-
Jj.theisen replied to the thread OPNsense as VM inside Proxmox - no WAN access to OPNsense (Hetzner).Hi @Antijurist thanks for posting in the forum! For this setup you don't need IP forwarding. First things first, i recommend pinning the network interface names with pve-network-interface-pinning see [1]. Secondly please confirm that the...
-
driley replied to the thread Win Server 2025 VM: DPC_WATCHDOG_VIOLATION 0x133 after upgrade to Kernel 7.x.Thanks for the input. I would recommend trying to disable: args: -cpu host,level=30,-hv-time,-hv-stimer,-hv-stimer-direct,-x2apic If it still crashes after that, you can try running a trace on your host to see exactly which KVM events are... -
SStephane Chazelas replied to the thread Older LTS nvidia vGPU host drivers with newer kernel / pve-manager.Replying to myself, I see a 9.2.2 / 7.0.2 / 19.5 / 580.159.1 was added in https://pve.proxmox.com/mediawiki/index.php?title=NVIDIA_vGPU_on_Proxmox_VE&diff=prev&oldid=12599 which means we now carry on using the LTS nvidia drivers and upgrade...
-
Cchrispage1 replied to the thread LXC Boot and vzdump Failures on Ceph RBD after Upgrade: fsconfig() failed ... Can't lookup blockdev (Exit Code 32).I'm still struggling with issues having updated to 9.2.2 from 9.1.9 TASK ERROR: unable to create CT 135 - command 'mkfs.ext4 -O mmp -E 'root_owner=100000:100000' /dev/rbd-pve/24f246db-267a-4a95-9346-2142944edec8/ceph_data/vm-135-disk-0' failed...