Latest activity
-
TTErxleben replied to the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine.Ich habe nochmal einen angestrengten Blick auf dein Hardware-Lsiting geworfen. Dabei fiel mir die Zeile Laufwerk (scsi0) local.vm:vm102.disk-0,size=100GB als seltsam ins Auge. In einer Standardumgebung sollte das Laufwerk (scsi0)...
-
Wwaltar replied to the thread Glusterfs is still maintained. Please don't drop support!.Got fuse mount that way ... and that's the point of support of qemu ...: The Proxmox Native Custom Directory Trick (Recommended) You can instruct QEMU to use a gluster:// network URI directly instead of pointing it to a local folder mount and...
-
Ccurruscanis replied to the thread Encrypted backup of only one VM fails, but non-encrypted works fine.When I run that command I get the following error: root@yscdtpbs:/mnt/dtsynlun2/.chunks# proxmox-backup-debug inspect chunk /mnt/dtsynlun2/.chunks/552bef595b29e12e35478064ddf764383b8f593dadc606df538dbed7bd0407df Error: could not open chunk file...
-
Mmacamba replied to the thread e1000 driver hang.Above config kept the NIC crashes away for a couple of months, but they came back with no trace in the log. After adding 'tx off' and 'rx off' to the config as well it seems things are stable again. For easy reference: iface nic0 inet manual...
-
driley replied to the thread Win Server 2025 VM: DPC_WATCHDOG_VIOLATION 0x133 after upgrade to Kernel 7.x.I would still give it a shot just to rule it out, but I get that you might not be able play around on the machine as you are depending on the Exchange Server being up. It might make sense to setup a small Windows Server VM and see if you can... -
Aalpha754293 replied to the thread [SOLVED] sda has a holder....Depending on what your disks were like that you're trying to wipe - you could do this; 1) Run the first command "as-is". # sgdisk --zap-all /dev/sdx 2) write a gpt to the disk in question, then exit # fdisk /dev/sdb fdisk> g (create GPT...
-
Ppromxmox_user021 posted the thread Clone VM without changing the UUID? in Proxmox VE: Installation and configuration.Hi folks, when cloning a VM (linked or full clone), proxmox sets a new UUID. It seems that this was not always done like this, because it causes problems in my infrastructure since some time that have not been there some years ago. I understand...
-
Ccurruscanis replied to the thread Encrypted backup of only one VM fails, but non-encrypted works fine.All my directories seem to be correct: root@yscdtpbs:/mnt/dtsynlun2/.chunks/55be# ls -Al | head total 132204 -rw-r--r-- 1 backup backup 3012125 May 23 00:12 55be068759f6752b5b385c0fe2664b08fedc5c5dca8a50da953160becc175818 -rw-r--r-- 1 backup...
-
Jj.theisen replied to the thread openfortivpn stopped working after updating host and container from Debian 13.3 to 13.5.Hi @mirmalag thanks for posting in the forum! Could you please confirm that in the update there were just Debian packages updated or if additionally there were PVE packages updated. You can use /var/log/apt/history.log to see this. Also...
-
T_toby_ posted the thread Blocked email generates reply, despite "ndr_on_block 0" in Mail Gateway: Installation and configuration.Hi PMG 8.2.11 Our new rule to block certain messages is generating a reply to the sender like The response from the remote server was: 554 5.7.1 Rejected for policy reasons (C68A16A269E9A022E9) even though we have ndr_on_block 0 in the mail...
-
Ppmbaeum replied to the thread Win Server 2025 VM: DPC_WATCHDOG_VIOLATION 0x133 after upgrade to Kernel 7.x.Thanks for the quick response! The output of AvailableSecurityProperties is: (Get-CimInstance -ClassName Win32_DeviceGuard -Namespace root\Microsoft\Windows\DeviceGuard).AvailableSecurityProperties 1 2 4 5 No 8 in the list, so hardware APIC...
-
SStingray93 replied to the thread Promox Oberfläche und Plex LXC nicht erreichbar, VMs aber schon.Ah, danke dir. Bei mir ist allerdings ein Intel X710 verbaut mit 10G, zusätzlich noch 2 2,5G Anschlüsse (i226) ... die verwende ich aktuell aber nicht, außer nun für vpro und als Fallback. Kann auch keinen einzigen Fehler im log in die Richtung...
-
CCookiefamily replied to the thread SDN VLAN VNets no longer work after an update from 9.1.9 to 9.2.2.Hi, sorry for the late reply, I was on an two week vacation. testing from inside the VM trying to ping its gateway: tap131i0 sees it v0074 sees it ln_v0074 doesn't see it vmbr0 doesn't see it bond1 doesn't see it trying to ping another VM that...
-
Mmszmidt posted the thread mdraid headers overridden during pve 8 minor upgrade in Proxmox VE: Installation and configuration.Hi all, During a recent minor upgrade of the Proxmox VE (PVE) host I experienced a serious issue with a RAID‑0 array that was managed by mdadm on an AlmaLinux 9.X guest. The disks had been presented to the VM via PCI‑e passthrough, so the guest...
-
SStingray93 reacted to kleinp's post in the thread Promox Oberfläche und Plex LXC nicht erreichbar, VMs aber schon with
Like.
Hast Du mal getestet, was passiert, wenn Du das Netzwerkkabel rausziehst und wieder steckst? Vielleicht das Intel Problem? -
SStingray93 reacted to anna_pve_berlin's post in the thread Promox Oberfläche und Plex LXC nicht erreichbar, VMs aber schon with Like.
Wenn die Windows-VM auf derselben NIC weiter erreichbar ist, würde ich zuerst trennen zwischen „Netzwerk weg“ und „Host-Dienste hängen“. Beim nächsten Auftreten per vPro/Console prüfen: - ist der PVE-Host noch per ping/ssh erreichbar? - laufen...
-
SStingray93 reacted to kleinp's post in the thread Promox Oberfläche und Plex LXC nicht erreichbar, VMs aber schon with Like.
https://forum.proxmox.com/threads/intel-nic-e1000e-hardware-unit-hang.106001/
-
Ccarles89 reacted to sterzy's post in the thread Update impossible after upgrade to PDM 1.1.1 with Like.
As promised a short update: The patch got applied and will be included in the 1.1.4 update for proxmox-datacenter-manager [1]. The package has not yet been published, it will likely become available shortly. Once it is available you should be...
-
Mmaxim.webster reacted to UdoB's post in the thread [SOLVED] Making best use of multiple NICs per Node with Like.
Sure. That approach is called a mesh: https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server#Example I do not use it, nowhere. You cannot expand it easily: to add a fourth member you would need to utilize a third NIC on each node. After...
-
Jj.theisen replied to the thread Rollback fails with "TASK ERROR: zfs error: cannot set property for <subvol>: use 'none' to disable quota/refquota".Hi @lubbdi thanks for posting in the forum! There was in issue a few years back which behaved similar, but as can be seen in [1] that was fixed a long time ago. Can you please share the configuration of the container you are trying to restore...