I'll just add in that Debian Trixie does it too if you remove systemd (so basically the same as Devuan Excalibur). I had this issue on every single guest on my work server, and just found it on a few of my home guests.
I worked around it for...
Wird dir im PVE zu deiner VM eine IP angezeigt und passt die auch zu deinem SSH Connect?
Die VMs mal neu gestartet mit Blick auf die Konsole?
Browser Einstellungen mal zurückgesetzt (Cache) ?
Irgendwelche Blocker aktiv?
Sind deine Netzwerk(e)...
This is absolutely needed and has to be very precise. I.e. which exact metric is used for both CPU and Memory "loads": CPU load vs CPU usage vs CPU pressure, Mem usage vs Mem pressure.
Currently testing CRS in lab and it seems to allow a node to...
Hi!
In more detail, each node's current cpu and memory usage is normalized with its own capacity (i.e. cpu_load = current_cpu / max_cpu and memory_load = current_memory / max_memory), where the node's current load is then a equal-weighted...
How is the storage set up? If it is zfs at both sides you should be able to do a simple zfs send > zfs receive to copy from one machine to the other. If you have different storage types at both ends it could be a little harder, and at that...
Vielen Dank für die netten Worte, den Blog-Beitrag und die zusätzliche Sichtbarkeit!
Wenn BackupPilot es sogar in deinen Talk schafft, freut mich das natürlich ganz besonders.
Stupid question though - if Proxmox already has the glusterfs storage plugin that allows it to work from the PVE GUI, then why would that need to change?
I'm not sure that I follow.
I mean, you guys already have it.
It already works.
And as...
You own comments disagrees with your statement that the data I ask about is irrelevant.
(It is highly relevant, pursuant to your own statements. If they were irrelevant, then you wouldn't have written what you wrote.)
Says the person who...
Also ich hab ja folgendes vor:
Proxmox 3-Node Cluster:
System 1: Proxmox Server für VMs
System 2: Proxmox Server für VMs
System 3: Proxmox Server (Mini-PC) aber nur für Verwaltungs-Server, QDevice, und CheckMK (quasi ein bisschen losgelöst)...
How is the storage set up? If it is zfs at both sides you should be able to do a simple zfs send > zfs receive to copy from one machine to the other. If you have different storage types at both ends it could be a little harder, and at that...
Sehr cooles Projekt, vielen Dank für die Bereitstellung. Gerade für Architekturen, wo zentralisiert nur eine Backup-Lösung genutzt werden soll, kann dies durchaus sehr interessant sein. Wenn es zeitlich passt, werde ich dies noch mit in meinem...
I'm using Proxmox for my private home server system behind a dynamic DSL network connectivity. So IPv4 is NATed and the IPv6 prefix is changing once a day.
As it turned out, with the default Proxmox install and Debians default ifupdown2 system...
Du meinst damit die virtuelle Platte des Betriebssystem und den Speicherort der Chunks?
Ich habe zwei Synology-Kisten. Eine hat nur ein einziges riesiges Volume und eine hat acht oder neun. Mehre Volumes hatte ich angelegt, weil ich die...
In order for it to be a true quorum provider, it has to be accessible to all nodes but NOT PHYSICALLY LOCATED at either site. The whole point is should one of the sites drop, the quorum provider is not affected.
Be mindful that if HA is enabled, around 2 minutes after losing quorum HA will reset the no-longer-in-quorum hosts. If you plan on using pvecm expected N, do it gradually as @UdoB explained above instead of setting it to 3 directly when the whole...
No, that's definitely the wrong tool for your task.
If you want to use a supported method with a GUI you may look at https://pdm.proxmox.com/docs/ - you can connect multiple PVE installations with this.
As I am not using that one, I can only...
Hmm, this passthrough seems to be common denominator. Once I have bigger window to put it down I'll try without IOMMU just to know, but this is not solution for me. Makes me even more scarry about upgrade to Proxmox 9
I may be late to this thread, but if you haven't made a purchase yet, you could always consider a 1L PC. I have an HP Elitedesk 800 G9 as my main Proxmox node. It has two m.2 slots, so I have Proxmox installed in a ZFS mirror on 2 NVME drives. HP...
Jedes Backupsystem, welches unabhängig vom PVE (egal, ob Cluster oder nicht) funktionsfähig ist, ist gut.
Ich habe ebenfalls eine PBS-VM in einer Synology, neben mehreren echten PBS. Mir war damals nicht klar, ob ich (für den Chunk-Store) eine...