Latest activity
-
Rrothkraut reacted to ThoSo's post in the thread [SOLVED] HyperV-Fehler nach Migration / VM bootet nicht with
Like.
Schön, wenn es jetzt für den Moment mal funktioniert. Aber darauf verlassen kannst du dich nach deiner Odyssee meiner Meinung nach nicht. Diese altertümlichen, geerbten Lösungen sind meistens Langzeitbeständig und ein Klotz am Bein. Beim nächsten... -
Gguruevi replied to the thread Glusterfs is still maintained. Please don't drop support!.Here is actual data from the home lab. constrained to 400Mbps network (more on that later) and tested on 1 system. All systems use the exact same boot image, running Ubuntu provisioned through Vagrant, 1 dedicated drive per node for the servers...
-
-
FFearless-Grape5584 replied to the thread Question regarding SDN WireGuard External Peers in PVE 9.2.I think there may be a conceptual distinction here. The WireGuard SDN fabric does not appear to be the same thing as a general-purpose remote-access VPN for phones or standalone clients. One important distinction is that the SDN fabric is mainly...
-
Kkayson posted the thread Restoring a container backup that has an idmap fails via PVE GUI, but works fine via CLI in Proxmox VE: Installation and configuration.I have a CT with the following config (last lines added by me manually, to map IDs for Free-IPA and to squash root): arch: amd64 cores: 1 features: nesting=1 hostname: idp00 memory: 2048 net0...
-
Eebiss reacted to bossanova808's post in the thread Asymmetric Tailscale speed issue with Kernel 7 and multiple NIC types with Like.
@fabian - FYI - did more testing and found a workaround - see https://github.com/tailscale/tailscale/issues/19777#issuecomment-4494864574
-
Dd.oishi replied to the thread PDM automated installs and LACP bond.I believe that automatic installation will become possible once the following feature improvement request is incorporated: https://bugzilla.proxmox.com/show_bug.cgi?id=2164 Since I also want to automate settings other than network...
-
SteveITS replied to the thread Cluster migration sanity check.Yes in that case the Qdevice would only serve a function if either node 1 or 2 was offline. Technically not needed unless one does e.g. a reboot. But safer. After you have 3 nodes I’d just wait until the end…where it’s better to have an odd... -
Wwieserfalke posted the thread Possibility of VLAN ID Synchronization with Firewall/Network controller? in Proxmox VE: Networking and Firewall.Hi, while playing around with Proxmox and Unifi I was thinking why it is not possible to have VLan IDs and there given names be synced between Proxmox and the FW/Network controller. As I use Unifi my first search was for there...
-
spirit replied to the thread Glusterfs is still maintained. Please don't drop support!.@alpha754293 - how many PG do you have on your ceph cluster ? (new pool on empty storage are setting low number of PG by default with target ratio is not configured on the pool, and this can give very low write speed). - do you have enable... -
Eebiss reacted to fiona's post in the thread Kubernetes overlay networking breaks when upgrading from PVE 9.1 to PVE 9.2.3 with Like.
We are still investigating the root cause. Another workaround should be using machine version 10.1 for the affected VMs.
-
GGorgonzolaPrimavera replied to the thread Cluster migration sanity check.Yes, I'm bulldozing the existing hosts like Lightning McQueen through Radiator Springs. But I need the compute around because I don't have spare compute readily at hand. So if I get to two nodes and add a qdevice, it really doesn't do much...
-
SteveITS replied to the thread Cluster migration sanity check.So you’re re-using the existing nodes? One documented gotcha is you must remove the Qdevice before adding or removing nodes. Is Ceph going on rotating drives? It can but SSDs are optimal.
-
Mmidisama reacted to generalproxuser's post in the thread resolv.conf overwritten at every debian container restart with Like.
The other option (which is what I use in my pihole containers using debian 12) is to create a hook file. I use dhcp as well with static leasing. My pihole containers are using dhcp with static leases. This is what I use. Create the file...
-
Aalpha754293 reacted to kayson's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
Another data point (not performance, but gluster-isnt-dead) - Debian is shipping glusterfs 11.2 in forky: https://packages.debian.org/en/forky/glusterfs-server
-
GGorgonzolaPrimavera posted the thread Cluster migration sanity check in Proxmox VE: Installation and configuration.Esteemed Proxmox peers, I've now heard "opinions" from the artificial "intelligence" engines of note about my migration plan from "that other system" to pxmx. But I'd really like a sanity check from Real Brains to make sure I'm not heading into...
-
Kkayson replied to the thread Glusterfs is still maintained. Please don't drop support!.Another data point (not performance, but gluster-isnt-dead) - Debian is shipping glusterfs 11.2 in forky: https://packages.debian.org/en/forky/glusterfs-server
-
SSeed replied to the thread [SOLVED] linux-tools-common?.linux-cpupower is not turbotstat... You even said yourself, tools-common is a "metapackage". I would think then, linux-cpupower is a package that contains the "utility" turbostat... linux-cpupower is installed via the debian "package" manager. So...
-
Aalexskysilk replied to the thread [SOLVED] linux-tools-common?.It means that this package is included in ubuntu distributions. Proxmox uses debian as its parent distribution, not ubuntu. it also means that its not an actual package, its a collection of applications which you can install by yourself, like...
-
SSeed replied to the thread [SOLVED] linux-tools-common?.Thank you. That's the one I need.
-
SAnd that utility is? I'd use the linux-cpupower package for that. It provides turbostat.
