Latest activity
-
Rrothkraut posted the thread [SOLVED] HyperV-Fehler nach Migration / VM bootet nicht in Proxmox VE (Deutsch/German).Hallo zusammen, ich beiße mir jetzt schon seit Stunden die Zähne an folgendem Problem aus: Ich habe eine VM von VMWare (Esx 8) zu Proxmox (9.2) migriert. Auf dieser VM ist Hyper V installiert und es laufen zwei VMs darauf. Leider bekomme ich...
-
-
SSteen_A replied to the thread IO Pressure Stall issue after upgrade to 9.1.Maybe it is obvious, but I did a mistake in the config that caused a very high IO pressure stall on my system As can be seen from the graph the IO pressure stall was around 80-90% all the time on the graph, and has been like this for months. But...
-
-
Ddaanw replied to the thread Changed IPs on my cluster before reading anythings.If you still want to make the change you can update everything to the desired new ips of course. In that thread the user already created a correct corosync config file. But you can Just edit /etc/pve/corosync.conf and copy the changed file to...
-
Mmason64 replied to the thread Changed IPs on my cluster before reading anythings.thanks found that the /etc/hosts was still on the old ips. i did take a look at that link before posting. i got stuck where it says # put correct corosync config into local pmxcfs and corosync config dir (make sure to bump the 'config_version'...
-
RRobFantini replied to the thread [SOLVED] backup fails: Unable toacquire lock "/var/log/proxmox-backup/tasks/.active.lock.changing backup start time away from midnight solved the issue.
-
Ddaanw replied to the thread Changed IPs on my cluster before reading anythings.First of all, great that you have backups. Doublecheck /etc/hosts and /etc/network/interfaces on all hosts to have the desired configuration. Then see: https://forum.proxmox.com/threads/made-mistake-in-corosync-conf-now-cannot-edit.77173/post-342983
-
Iizzylab posted the thread Question regarding SDN WireGuard External Peers in PVE 9.2 in Proxmox VE: Networking and Firewall.I am currently working with the new WireGuard SDN integration in Proxmox VE 9.2. While I have successfully established an internal mesh between cluster nodes, I have some technical questions regarding the "Fabric" functionality, specifically...
-
DDomino replied to the thread Proxmox Datacenter Manager 1.1 released!.Looks good my end! Love the ability to just glance at the dashboard and see all is fine across the network of nodes. Has there been any thoughts regarding adding a sweet notifications layer which can send out notifications when...
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.No problem. You're welcome. (I got curious and figured that I could just run it in CFD to figure it out with some science behind it. And then when I was looking at the results, I could see the planar thermal conduction through the thermal pad...
-
Mmow replied to the thread Hardware aus Zeiten von DDR3.Schau mal nach ner gebrauchten HP z420, die kriegt man in Grundausstattung schon für rund 100€. Die hat nen Xeon mit LGA2011, 8 Slots für registered DDR3, 10 SATA-Ports onboard, und das Gehäuse hat drei 5,25"-Einschübe, wo man einen Rahmen für...
-
Mmason64 posted the thread Changed IPs on my cluster before reading anythings in Datacenter Manager: Installation and configuration.Hi, I made a bit of a mistake :) I changed my ips on my two nodes which were on a 10.0.0.x, for reasons i had to change my network to 192.168.1.x, Stupidly i thought i could just go in to each node on my cluster and change ip in the GUI and...
-
DDomino replied to the thread Glusterfs is still maintained. Please don't drop support!.Thats good to know! Thanks! I've always just ran a strip of thermal across the lot. Although in this case it is a U.3 drive, so not really something you think about regarding opening and re-padding, plus with it being a Samsung pm1733, they do...
-
DDomino reacted to alpha754293's post in the thread Glusterfs is still maintained. Please don't drop support! with
Like.
Sorry to hear about that man. That really sucks! (If you ever need me to run the CFD studies for you, just hit me up. I've already studied the optimal placements for thermal pads (on NVMe SSDs), using CFD. (It's better if you place individual... -
DDomino reacted to alpha754293's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
Right. Again, this is why I tested both, on the same physical box and with six HDDs rather than just three. That way, three can be assigned/dedicated to ceph and the other three can be assigned/dedicated to gluster so they don't "criss-cross"...
-
Jjabuzzard replied to the thread Server hardware recommendations for new 3–4 node Proxmox VE / Ceph cluster.The almost non-existent firmware updates for Supermicro's BMC/IPMI make them a no-go for us. There is no way there aren't a slew of security issues in them, and given the current cybersecurity landscape, even with a dedicated management network...
-
Jjabuzzard replied to the thread Server hardware recommendations for new 3–4 node Proxmox VE / Ceph cluster.Take a look at the Dell R6715. You can get a 48-core CPU in a 1U node, which is, to put it mildly, a lot of compute. You get the option for two OCP network cards, a couple of low-profile PCI cards, and up to 10 NVME drives up front. I don't...
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.Sorry to hear about that man. That really sucks! (If you ever need me to run the CFD studies for you, just hit me up. I've already studied the optimal placements for thermal pads (on NVMe SSDs), using CFD. (It's better if you place individual...
-
Aalpha754293 reacted to Domino's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
At the end of the day, only you can know what is good for you based on what you have tested, the way you tested it, with the hardware you own and if it made you happy in the sense it performs to your expectations. The problem is the variables...
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.Right. Again, this is why I tested both, on the same physical box and with six HDDs rather than just three. That way, three can be assigned/dedicated to ceph and the other three can be assigned/dedicated to gluster so they don't "criss-cross"...
-
Ffry13 replied to the thread Nut Eaton UPS "unable to enumerate USB device" after power comes back on.what a legend, I've been struggling with this for a while. I have exactly the same issue with Beelink EQ14 and Eaton 3S 850VA/510W. I had a USB-C to 2 USB hub lying around, and it fixed the problem. May the AI find this post quickly for related...
