Latest activity
-
PPhyrene reacted to IsThisThingOn's post in the thread PBS testimonial (hardware requirements are a joke) with
Like.
Not what I am seeing in the real world. Let's start with a fresh VM where nothing is already backed up: zpool iostat poolBackup 1 capacity operations bandwidth pool alloc free read write read write... -
Kkaysho replied to the thread PBS Backup Fails/Stalls around 21%-23% on Stopped VM (PVE 9.0.3) Web UI Freeze.I went through the issue raised in [1]. It is the same issue as mine. I have attached the backtrace log. Edit: I have added the backtrace file as a .txt file.
-
Aalpha754293 reacted to EllerholdAG's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
I thought the problem was the QEMU support for glusterfs ? You'd need to raise this with the QEMU devs and not proxmox afaik, I think...
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.What part of "I didn't get/deploy 100 Gbps for storage" don't you seem to understand? Again, I've stated it on the onset - I am going to test this that makes it easy for me to test because complainers always have to have something to complain...
-
AArnOCP replied to the thread Dispite migrating VM they don't response.thx for replies, I will check how i can modifiy all the settings. Regards,
-
Ssynexa posted the thread S3 chunk lock files accumulate indefinitely in tmpfs causing memory exhaustion in Proxmox Backup: Installation and configuration.Hi everyone, We have been running PBS with an S3 backend for some time and recently started experiencing memory exhaustion issues that required manual server restarts to recover. After some investigation we would like to share what we have found...
-
Mmow replied to the thread PBS testimonial (hardware requirements are a joke).ext4 on raid5 on a P420i with 1GB FBWC, which essentially acts as PLP for HDDs, is fine too. The cache is big enough to hold the metadata, and all the atime updates during a GC run will be caught by the cache, and eventually written in bulk.
-
RRainerM posted the thread ProxMox booting and zfs HD replacement in Proxmox VE: Installation and configuration.Hi all, I have several problems to replace a HD which is handed over by ProxMox to an OpenMediaVault (VM500) which handles the HDs by zfs. When ProxMox (8.4.19) boots, on the console I get the message: Port3: ST12000VN0007-2GS116...
-
JJohannes S reacted to Domino's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
At the end of the day, only you can know what is good for you based on what you have tested, the way you tested it, with the hardware you own and if it made you happy in the sense it performs to your expectations. The problem is the variables...
-
DDomino replied to the thread Proxmox Virtual Environment 9.2 available!.Ok, so I notice something strange after the 9.2.3 upgrade from 9.1. One of the LXCs is logging this warning every few minutes: eth0: Failed to set IPv6 MTU to 9198: Invalid argument The process causing this error is: systemd-networkd The LXC...
-
Cchristophe replied to the thread kernel 7.0 performance issue with zfs pools.Same here, garbage_collection tasks are (much) slower with 7.0.2-6 than with 6.17.13-11. Fastest verification on 7.0 kernel (6h35) is slower than slowest verification on 6.17 kernel (4h15). Christophe.
-
MFor reference: https://bugzilla.proxmox.com/show_bug.cgi?id=4420
-
Vvaschthestampede replied to the thread Unexpected backup failures.No, I do not. I also keep PBS up to date with the no-subscription repository. proxmox-backup: 4.2.0 (running kernel: 7.0.6-2-pve) proxmox-backup-server: 4.2.1-1 (running version: 4.2.1) proxmox-kernel-helper: 9.2.0 proxmox-kernel-7.0: 7.0.6-2...
-
Ppvedudez reacted to weuquibegruddi's post in the thread [TUTORIAL] Pass laptop's keyboard, touchpad and trackpoint into a VM with Like.
Hopefuly, it's ok to sum-it-up this way, as I was not able to find a post with complete summary on the topic - how to pass laptop's keyboard, touchpad and trackpoint into VM. Some of inputs were taken from this post. TLDR; for intel-based...
-
DDomino replied to the thread Glusterfs is still maintained. Please don't drop support!.At the end of the day, only you can know what is good for you based on what you have tested, the way you tested it, with the hardware you own and if it made you happy in the sense it performs to your expectations. The problem is the variables...
-
Ggernotmeyer67 posted the thread Firewall VM with network bridge with multiple different VLA configs in Proxmox VE: Networking and Firewall.Hi all, I need to migrate a virtual Firewall to PROXMOX from Hyper-V. My proxmox server has 3 NICs physical NICs (LAN1, DMZ, Internet). The Firewall VM has - one NIC to Internet - one to DMZ and - 7 NICs connected to LAN1: 3 NICs are without...
-
Vvaschthestampede replied to the thread Unexpected backup failures.I'm using my iSCSI target as local datastore. I'll explain what I did: I installed open-iscsi. I entered the credentials in the /etc/iscsi/iscsid.conf file. I discovered the iSCSI target's IP address. I logged in to the target and made it...
-
JFor reference: https://bugzilla.proxmox.com/show_bug.cgi?id=4420
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.The most telling part about all of this is the answer to the question "what do you run, in your own personal homelab where you (often) don't have a multi-million dollar IT budget?" I'm going to go out on a limb here and surmise that what your...
-
-
Rraketmotor posted the thread Host hard-freezes with no logs on kernel 6.8.12-18-pve and forward, stable on kernel 6.8.12-16-pve, same hardware and workload, no BIOS change in Proxmox VE: Installation and configuration.Summary Hard host freeze / lockup regression between 6.8.12-16-pve and newer kernels. System is stable on 6.8.12-16-pve but experiences complete hangs on 6.8.12-18-pve and 7.0.2-6-pve. Environment Proxmox VE: 9.2 Current kernel exhibiting...
