Hello, I've upgrade my small PVE cluster from 8.4 to 9.2.3 and I've noticed that the network settings on the PVE hosts (3) are not consistent in terms of interfaces.
IE:
pve-manager/9.2.3/d0fde103346cf89a
Linux 7.0.6-2-pve (2026-05-29T11:08Z)...
I have the same issue with my Proxmox 9.2.3.
I also run Talos 1.13.3(Issue persists with older version of Talos eg 1.12.8) in Proxmox 9.2.3.
I have 2 identical environments: Proxmox 9.2.3(broken) and Proxmox 9.1.6(working just fine). 3 host...
I'd say convenience of doing it with one command. For a one node homelab deployment not much of a deal, I wouldn't use it on a prod environment though.
Hi,
I have a couple of domain i put in the welcomelist by accident and wish to remove them, i am unable to do so. if i click on one then press remove it does notthing. i have tried to edit and leave blank but wont let me.
any idea on how to...
I played with gluster3.7 back in like 2018-2019 in an attempt to solve a very specific problem: burning through SSDs because of FEA scratch data.
RAM doesn't have the same kind of finite write endurance limit like NAND flash based SSDs have. (If...
After updating a host from 9.1.4 > 9.2.3 I'm noticing that there is now a noticeable increase in IO pressure.
Update was done an host rebooting at around 2026-06-01@13:00
Same thing with IO Delay:
Anyone else who have updated have the...
Seemed to have been a time-specific bug, because I currently do have at least one server with a MegaRAID SAS which is conveniently still in the Linux kernel: https://github.com/torvalds/linux/blob/master/drivers/scsi/megaraid/megaraid_sas.h - it...
As long as you have a L3 connection between your pbs and dedicatedserver it should work. You could portforward the source ip of the dedicted server to your pbs, or could use tailscale or a similar solution. The first way is probably faster, the...
@shanreich was finally able to reproduce the issue. When the physical NIC does not support the
tx-udp_tnl-segmentation: off [fixed]
tx-udp_tnl-csum-segmentation: off [fixed]
features, the issue can happen. When the physical NIC does support...
I gave up on all the software-defined storage layers.
Went back to direct-2-nvme, and good old solid backup schedules. I employ hardware-raid1 and 10 where data-uptime criticality applies.
I tend to carry this ethos across to both production...
Botton line: use whatever fits you.
I am using GlusterFS, Ceph, Drbd + Pacemaker + iSCSI + OCFS2, and guest what?
Works for me in N scenario.
And again: use whatever fits you and your customers...
See here, here, here, and here.
The citations above begs to differ.
I never said it was unstable.
So?
What's the "so what?" of it being only maintained by quote "a handful of people"?
(Again, if it's stable, why does this matter? You haven't...
Actually fixed this. There was a previous clone that was either stoped mid-clone or it finished and it was deleted. It was locked via the UI, and sort of in a strange state.
I unlocked it on the CLI as I knew it was not being used and could be...
Please see the attached file for virtio output. I also ran my end to end tests; even with the patch it's still broken.
Additionally see the output below:
root@pve1:~# qm showcmd 101 --pretty | grep net
-netdev...
You did not give many details about your system. By far too few.
So you get only a very sparse reply: check your NIC names and verify the network settings.