Latest activity
-
Thanks daanw, much appreciated! I ran the following command and will keep monitoring PVE for any potential hardware unit hangs. ethtool -K eno1 gso off gro off tso off -
spirit replied to the thread Proxmox 9.2.2 with Ceph Squid bad write performance.200MB/S with which block size ? iodepth ?
-
fiona replied to the thread TPM State problems with CEPH / Proxmox 9.2.Hi, are you using dual-stack networking https://forum.proxmox.com/threads/rbd-sysfs-write-failed-on-tpm-disks.131233/ ? Please share the storage configuration cat /etc/pve/storage.cfg, Ceph config /etc/pve/ceph.conf, VM config qm config 123 and... -
Jjacky0815 replied to the thread [SOLVED] Fehler Aktivierung.Hallo Impact, danke. Jetzt habe ich zumindest den Fehler. Im Gegensatz zu den anderen möchte dieser Node shop.proxmox.com via IPv6 erreichen, obwohl er ebenso die IPv4-Adresse aufgelöst bekommt. Jetzt suche ich mal weiter.
-
YaZoal reacted to RobFantini's post in the thread [SOLVED] unable to read '"/etc/subscription"' - Permission denied (os error 13) (500) with
Like.
After today's updates I get that message when I click on a node on pve screen # ll /etc/subscription -rw-r----- 1 root root 367 Jun 1 03:58 /etc/subscription this fixed the issue chmod 644 /etc/subscription -
TTaupsi replied to the thread Proxmox 9.2.3 - 2-Node Cluster Join: pve2 stays grey, pve-ssl.pem missing despite quorum.Here are the logs from both nodes after a clean join attempt (pvecm add 192.168.188.10 --force on pve2):
-
CChrisTG74 replied to the thread Roll out "custom certificate" updates via shell / api?.Oh, the pvenode commands are also valid for PMG? I didn't expect that. I thought they're only for PVE Nodes.
-
MMaltePScheuss replied to the thread Running Cisco UC Appliances In Proxmox (i.e., CUCM, CUCS, Expressway, IM&P, CMS, CSR1000v).Made ova import by using newest ova from cisco and followed ome of them https://forum.proxmox.com/threads/import-ova-or-virtual-image.114095/ CPU is set to host, becaue i use Intel Xeon Gold 6240, it has multiple avx512 flags in lscpu output and...
-
-
CChrisTG74 reacted to cheiss's post in the thread Roll out "custom certificate" updates via shell / api? with Like.
Hi, you are looking for this API endpoint: https://pve.proxmox.com/pve-docs/api-viewer/index.html#/nodes/{node}/certificates/custom Or on the shell with pvenode cert set: https://pve.proxmox.com/pve-docs/pvenode.1.html#cli_pvenode_cert_set
-
MMartin.B. replied to the thread [SOLVED] Cluster 2 node + qdevice, different pvecm status.reading a few more threads to crosync with qdevice and removing/setting it up some more times, it is still not voting. collected some more information. so on the pve nodes i have the follwing packages installed: pve3:~# dpkg -l | grep corosy ii...
-
JHallo zusammen, ein Node möchte keine Subscription mehr annehmen. Fehlermeldung lautet: "Error checking subscription: io: No route to host (os error 113) (500)". Er hat aber - wie alle anderen - auch ganz normal Internetzugriff. Weiß jemand wie...
-
Gguruevi replied to the thread Glusterfs is still maintained. Please don't drop support!.I thought I was reading a 10yo post. How do you get Win11 to run on a 4th gen Intel?
-
shanreich replied to the thread sdn Config. gateway not reachable.How does the routing table on the hosts (in particular the exit node) look like? ip r Did you disable rp_filter on the exit nodes? Does the firewall have a return route for external traffic? How does a tcpdump look like when trying to reach the... -
shanreich replied to the thread SDN zone shows "pending" on peer nodes after node reboot (9.2.x).I'll see if that doesn't trigger any edge cases with some OVS configurations and then update the detection accordingly!
-
cheiss replied to the thread Roll out "custom certificate" updates via shell / api?.Hi, you are looking for this API endpoint: https://pve.proxmox.com/pve-docs/api-viewer/index.html#/nodes/{node}/certificates/custom Or on the shell with pvenode cert set: https://pve.proxmox.com/pve-docs/pvenode.1.html#cli_pvenode_cert_set -
Bbelkitos replied to the thread Proxmox Backup Server 4.2 released!.Hello everyone, I noticed that support for other operating systems is present on the PBS roadmap, but I could not find any information regarding an estimated release date. Is there any timeline, target version, or rough estimate for when...
-
Jj.theisen replied to the thread Dispite migrating VM they don't response.Does this mean, during the reboot the VMs are also unresponsive through the console? This is perfect thank you! Thanks for providing the logs! It seems though that there is some form of Ceph involved here. Can you please provide the outputs of...
-
fiona replied to the thread Kubernetes overlay networking breaks when upgrading from PVE 9.1 to PVE 9.2.3.Thank you for testing! Between QEMU 10.1 and 10.2 support for negotiating extended VirtIO features was added, so that is likely related to the regression. Unfortunately, we were not yet able to reproduce the issue. Could you go to the VM monitor...
-
CChrisTG74 posted the thread Roll out "custom certificate" updates via shell / api? in Mail Gateway: Installation and configuration.Hi, is it possible to replace "custom certificates" from shell or via api? I'm speaking of this ones here: My goal is, to do cert-renewal automatically. What service(s) need to be restarted after exchanging the certs? Many thanks in advance!
-
-
RRobFantini posted the thread [SOLVED] unable to read '"/etc/subscription"' - Permission denied (os error 13) (500) in Proxmox VE: Installation and configuration.After today's updates I get that message when I click on a node on pve screen # ll /etc/subscription -rw-r----- 1 root root 367 Jun 1 03:58 /etc/subscription this fixed the issue chmod 644 /etc/subscription
