Latest activity
-
FFelixK replied to the thread Realtek 8157 driver installation (Wavlink WL-NWU340G).FYI, RTL8157 support is now merged into the mainline r8152 driver: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/net/usb/r8152.c?id=fd3c7d080df53136c7e7e37f753fb7bd4640ca42 It will be in Kernel 7.1.
-
TTarzoq reacted to amkit951's post in the thread [TUTORIAL] How to setup PBS as a VM in Unraid and uses Virtiofs to passthrough shares with
Like.
hi, First of all thanks for the post, this really helped. I am facing an issue when I initiate my backups to this pbs. Logs from the failed backup are atteached- 2023-06-11T01:15:39+05:30: starting new backup on datastore 'pve_backups'... -
TTarzoq reacted to d0xt0p's post in the thread [TUTORIAL] How to setup PBS as a VM in Unraid and uses Virtiofs to passthrough shares with Like.
Did you manage to solve this problem?
-
Ddaalinaar posted the thread Kernel Panic on reboot from ZFS in Proxmox VE: Installation and configuration.I'm having an issue and can't get my server to boot back to the prompt. Any reboot gives the error [31.621178] PANIC: zfs: rt={spa=(zfspoolname) vdev_guid=1903510110132383870 ms_id=471 ms_allocatable}: removing nonexistent segment from range...
-
RRaylane reacted to celemine1gig's post in the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird. with Like.
Exakt was zu erwarten war. Nochmal für's Verständnis: Deine GPU hat ein Problem damit, wenn sie mitten im Betrieb resettet werden soll. Das ist für ein Consumer-Device auch nicht wirklich Teil des Use-Case. Nun kann man dafür Workarounds...
-
Jjabuzzard posted the thread Changing IPv4 subnet size on existing SDN Fabric in Proxmox VE: Networking and Firewall.Is it possible to change the IPv4 subnet size on an existing SDN Fabric? I would like to go from a /24 to a /27, which won't require changing any IP addresses, since the three IP addresses allocated for the Ceph network will still fit. That will...
-
OOnslow reacted to Spinning_rust's post in the thread [SOLVED] Proxmox ACME Knot DNS challenge fails with Like.
UPDATE I found the solution to my problem: it was the keyname I used, the wrong value for the zone field and the API for some reason, the knot plugin type does not work, but the generic "nsupdate (RFC 2136)" does So what made it all work...
-
Ccelemine1gig replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..Exakt was zu erwarten war. Nochmal für's Verständnis: Deine GPU hat ein Problem damit, wenn sie mitten im Betrieb resettet werden soll. Das ist für ein Consumer-Device auch nicht wirklich Teil des Use-Case. Nun kann man dafür Workarounds...
-
Mmsachse replied to the thread [SOLVED] PVE crashes unexpectedly.The node has seen another crash within 48 hours. I'm adding the journalctl log from before the crash in case that helps figuring out the cause. Any suggestions? May 31 10:51:14 pm pvedaemon[1282]: <root@pam> successful auth for user 'mirko@pve'...
-
MMagneto replied to the thread is it possible to have zero access to the self hosted PVE incase of robbery.You can encrypt any VM's disks. Thus you would need to type in the password when the VM boots up, and as soon as it's powered off, the VM is locked / encrypted again. So, unless they manage to steal your hardware and keep it powered on, there's...
-
MMagneto replied to the thread [SOLVED] Proxmox 9.1.1 Cannot install CEPH.Aaah, well spotted. I didn't even see that it's trying to install the enterprise version. CEPH is now installed on this node.
-
RRaylane replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..So ich hab den vendor-reset entfernt und das compilieren des Kernels hat geklappt. Aber wie es aussieht funktioniert der integrierte Reset nicht und der ganze Knoten friert einfach ein. Laut Log passiert folgenden: Wenn eine Linux Basierte VM...
-
-
Hhermannw posted the thread Backup Server as a VM and pass through drive in Proxmox Backup: Installation and configuration.Hi, I am quiete new to Proxmox, so my question might be easy to answer. My current home environment consists of a single Hyper-V host with a few Windows VMs, one of which is critical. The entire system is optimized for energy efficiency and...
-
Eedcoppen replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Kernel 7.0.x regression: ACS violation on PCIe port 80:1b.4 causes VM freeze — Arrow Lake + Thunderbolt 5 + Intel Arc B50 passthrough Hi all, posting to report a clear regression on kernel 7.0.x affecting my Windows 11 VM with PCIe passthrough...
-
OOpnseeker posted the thread IPV6 access to GUI and SSH requires turning firewall off and then on in Proxmox VE: Networking and Firewall.I have Proxmox setup with both IP4 and IP6 static addresses. IP6 access to GUI as well as SSH doesn't work. Ip6 Ping also doesn't work. I have macros for Ping and NDP enabled on the interface both in and out. Both input and output policies are...
-
DDer Harry replied to the thread Problem with time within vms.Red Hat gave specific instructions what needs to be send to the guest agent. The calls are missing here in the Proxmox Repository in the resume part. https://github.com/proxmox/qemu-server That is why I created the bug report. I repeated that...
-
JJohannes S reacted to Keeper of the Keys's post in the thread [feature suggestion] Degraded ZFS pools should be reflected in node state with Like.
@daanw I know I can have mail alerts, my point is that a pve/pbs node that has a degraded pool or smart errors for that matter should not be showing "all green/OK" in the summary or PDM dashboards, the system is NOT ok and may be teetering on a...
-
JJohannes S reacted to Keeper of the Keys's post in the thread [feature suggestion] Degraded ZFS pools should be reflected in node state with Like.
This is the bug I opened - https://bugzilla.proxmox.com/show_bug.cgi?id=7651
-
Pproxuser77 replied to the thread Problem with time within vms.OK, I see. It would certainly be useful if they implemented that command then. I'm still wondering if that mysterious command could be sent manually. This could mean that, until this is implemented properly in Proxmox, you might at least be able...
-
Ggasherbrum replied to the thread [SOLVED] Proxmox 9.1.1 Cannot install CEPH.do you have an enterprise subscription set up? if you dont set up no-subscription for ceph
