Latest activity
-
TIm Zuge dieser Diskussion: https://forum.proxmox.com/threads/hardwarer-oder-software-raid.183785/ kaue ich wieder mal gedanklich auf einer moderneren, kostengünstigen SAS-Version rum. Kein echtes Proxmox-Problem, sondern nur Neugier. Switche...
-
Aalexskysilk replied to the thread [SOLVED] Cannot Install Proxmox on T610 Poweredge with H700 PERC card.There are multiple documented issues with modern Kernels (>6.2) with LSI based controllers on older (pre Haswell) platforms, stemming from bios mapping issues- older kernels were much more foregiving. You can try to shoehorn their firmware into...
-
JJohannes S reacted to celemine1gig's post in the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird. with
Like.
Wenn du schon das externe (nicht Proxmox integrierte) "vendor-reset" Repo nutzen willst, dann würde ich auch dort nachfragen was los ist: https://github.com/gnif/vendor-reset Ansonsten wäre es hier wohl gut aufgehoben... -
JJohannes S reacted to t.lamprecht's post in the thread Proxmox Datacenter Manager 1.1 released! with Like.
This is not planned, as already mentioned in the past, a single subscription would have to start much higher to recoup cost, the current approach scales much better for all and provides an additional benefit for basic and higher. In any case...
-
JGegenfrage: Kam in meinem Beitrag vor, man müsse gegen A sein, wenn man B präferiert? Ich wollte lediglich verdeutlichen, dass viele Wege nach Rom führen.
-
Ccfgmgr replied to the thread [SOLVED] Cannot Install Proxmox on T610 Poweredge with H700 PERC card.Are they Dell drives that are backing the PERC? IDRAC (even iDRAC6) should give you some idea if things are OK as Onslow suggested. Seems like there might be other problems with the HW.
-
Ccelemine1gig replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..Wenn du schon das externe (nicht Proxmox integrierte) "vendor-reset" Repo nutzen willst, dann würde ich auch dort nachfragen was los ist: https://github.com/gnif/vendor-reset Ansonsten wäre es hier wohl gut aufgehoben...
-
Sseelenvirtuose posted the thread No space left on device in Proxmox VE: Installation and configuration.Hello. I need some help with the above mentioned issue. I have a simple Proxmox installation on a single Mini PC. Yesterday, I spotted some unusual problems, like not getting into the web UI. After several reboots, the system seems to work again...
-
Kkromberg replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Thanks for that, it helped some but still not working. Looks like I will need to reinstall and configure proxmox back to version 8.
-
OOnslow replied to the thread Can't connect to PVE9 consoles [solved].Hi. Instead of apt upgrade, always use apt full-upgrade
-
Pphip replied to the thread Combine datastore and direct file archival to tape.Hi, I first wanted to check if some plans for that are already there, but apparently not. I've now created an FR: https://bugzilla.proxmox.com/show_bug.cgi?id=7645 Regards, Philipp
-
Jjanus57 replied to the thread Passkey Login (not 2FA).Hi, See : https://bugzilla.proxmox.com/show_bug.cgi?id=5678 Best regards,
-
AChanging the domain (lan) works fine. Changing the node/host name (pve01) is more problematic (see threads on this forum about problems with renaming).
-
AAleXSR700 replied to the thread How to safely change domain/FQDN?.Luckily I renamed that during installation giving it a "unique" id of pve01. I wonder why the default is pve rather than the more future proof pve01.
-
IIS-PBS replied to the thread Passkey Login (not 2FA).UP for maintainers. We are still waiting this feature
-
RRaylane posted the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird. in Proxmox VE (Deutsch/German).Hallo, ich habe Probleme das mit Kernel 7.x immer die Meldung "Kernel Panic! VFS: Unable to mount root fs on unknown-block (0,0)" erscheint. Aktuell kann ich nur in den Kernel 6.17.13-13-pve booten. Durch das deinstallieren von Proxmox VE konnte...
-
OOnslow replied to the thread [SOLVED] Cannot Install Proxmox on T610 Poweredge with H700 PERC card.Welcome, @Brodesps As a test, I would try to install some other Linux distribution - to check whether the issue is PVE related or rather a general one.
-
Ccarles89 reacted to janus57's post in the thread Way more NAGware, very little functionality, bugs galore with Like.
Hi, Promos staff have already responded to that to your post (see : https://forum.proxmox.com/threads/message-no-valid-subscriptions.177349/#post-825922). Community subscription is for enterprise repo of pve, pbs or pmg, not PDM (which can...
-
FFuriousRage replied to the thread [SOLVED] Created cluster, one node storage gone.Thanks, seems i now could restored the vm to its correct location :D
-
OOnslow reacted to RolandK's post in the thread Proxmox setup with RAID 1-configuration on USB attached storage with Like.
mind , that you should avoid default cache settings (= O_DIRECT) with qemu/kvm VMs on top of mdraid (containers are fine), otherwise you will risk inconsistencies in the raid, as mirror can silently break with directio writes going wrong. this...