Latest activity
-
ZAfter being a bit inspired by the awesome Nimble Plugin that was released I decided to use a little of my downtime on Vacation to try and give the same thing a go, but using Synology/DSM as the storage backend. This will allow you to use iSCSI...
-
RolandK replied to the thread Proxmox only allow 100GB of disk space for VM data.you need to read into linux lvm logical volume management basics. there are lot of tutorials and information on the net -
TTErxleben replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Wenn jemand über sowas berichtet, schärft das natürlich den Blick und man stolpert dann über Dinge, denen man sonst keine Beachtung schenkt. Gerade wenn es offenbar nur ein Schönheitsfehler ist, denn diese VM läuft genauso wie ihre 8 Kumpels...
-
RolandK replied to the thread file system issue with block device passthrough.>/dev/disk/by-id/usb-TO_Exter_nal_USB_3.0_2015033100081-0:0 is how the drive shows up in the VM. maybe i did USB passthrough instead of storage passthrough? yes >i don't see it in any of the config files tho. most likely this entry: usb0...
-
Mmax1337 replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.which ifreload does not return anything here is the output of stat /usr/sbin/ifreload File: /usr/sbin/ifreload -> ../share/ifupdown2/ifupdown2 Size: 28 Blocks: 0 IO Block: 4096 symbolic link Device: 252,1 Inode...
-
Ddjpatrizo posted the thread Proxmox only allow 100GB of disk space for VM data in Proxmox VE: Installation and configuration.Hi, I have a 930DB data for my proxmox server. After installed the partition okly show 100GB of diskspace available... I have checked all disk space has already assigned to the pv and the vg. After I have deploy several VM machine and is...
-
-
Ccyb3rx reacted to Gilberto Ferreira's post in the thread Proxmox Datacenter Manager 1.1 released! with
Like.
You can install it inside a VM. You will see all your clusters, vms and PBS. You'll can start, shutdown, stop, migrate vm from one node/cluster to another. But to set vm parameters, you still need to open the webui from that target. Pretty sure... -
Jjanus57 replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Hi, You should take a look at the manual of your hardware because if your backplane doesn't have an expander, then your single cable may not work like you think. If you have doubts, you can post the part number. Best regards,
-
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.I am back, I did forget to mention, I did try this workaround already https://forum.proxmox.com/threads/ceph-osd-creation-error.136839/
-
Ttomasich replied to the thread PBS backup space grow up constantly.I don't understand, Namespace are created to organize backups, what is wrong?
-
GGilberto Ferreira replied to the thread Proxmox Datacenter Manager 1.1 released!.You can install it inside a VM. You will see all your clusters, vms and PBS. You'll can start, shutdown, stop, migrate vm from one node/cluster to another. But to set vm parameters, you still need to open the webui from that target. Pretty sure...
-
Ddaanw replied to the thread Proxmox not rebooting properly.Very annoying if a cold start works but a reboot doesn't! It seems that BIOS somehow doesn't find the harddisk or EFI partition after a reboot. To confirm; by going into the BIOS after a reboot you don't see the disk and the boot option there? I...
-
shanreich replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.This is very odd... can you post the output of which ifreload stat /usr/sbin/ifreload apt-cache policy ifupdown2 -
Mmax1337 replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.Hi Stefan, when I try to run ifreload -avd I get permission denied (logged in as root). This seems strange to me. By the way here are the outputs of ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen...
-
Bbahril reacted to rellek74's post in the thread Help with UEFI boot issue after PVE 9 upgrade with Like.
in case it helps anyone... For me, I had to boot into recovery and install grub-efi-amd64. apt install grub-efi-amd64 reboot
-
jebbam replied to the thread Cluster not quorate - extending auth key lifetime!.Ok. I rebooted nh5, then created the nh5-journal-boot-fresh.txt file. Note: the PVE services start on boot, so they try to run. Then I stopped the services, this it the nh5-journal-boot-stopped.txt file. Then I started the services again, in... -
fiona replied to the thread After PVE 8to9 upgrade, unable to check guest fs freeze status.No, the commands related to freeze all have an "enabled" : false,. Are you sure this actually worked in Proxmox VE 8? I think it might just not have logged the failure to execute the commands, because of a bug, see... -
Ccyb3rx replied to the thread Proxmox Datacenter Manager 1.1 released!.where can we install it? do we need a dedicated host (hardware server)? Is it similar to VMware vCenter for managing VMs and networks centrally? can we install it as VM on proxmox cluster like with VMware?
-
AAzapa replied to the thread file system issue with block device passthrough.this is all from the host: :~# fdisk -l /dev/disk/by-id/usb-WD_easystore_266A_575838324431324148413836-0:0 Disk /dev/disk/by-id/usb-WD_easystore_266A_575838324431324148413836-0:0: 4.55 TiB, 5000947302400 bytes, 9767475200 sectors Disk model...
-
shanreich replied to the thread SDN EVPN IP-VRF and MAC-VRF panels are empty, but vtysh shows correct routes.sent a patch that should fix this issue: https://lore.proxmox.com/pve-devel/20260528133947.309145-1-s.hanreich@proxmox.com/T/#u
