Latest activity
-
Ppille99 replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.the issue, as i see, the osd service doesnt start. you need reset the counter systemctl reset-failed "servicename" systemctl start service i had the same issue last weak, the result from some network changes. never got it fully up again...
-
Ppille99 replied to the thread Single port on NIC randomly disconnecting.The r8169 network driver is notorious in Linux and Proxmox for causing exactly this type of flapping behavior under heavy load or bridging. apt update apt install -y pve-headers pve-kernel-helper pve-edk2-firmware dkms r8168-dkms install...
-
Ppille99 replied to the thread Easy Way to Automatically Forward Ports to VM's / LXC Containers.did you check out the datacenter firewall, node firewall and vm firewall ? create security groups, on datacenter level, and assign it to your desired vms. to be honest: i have a more complex setup and it penetrated me from back, after 3 days i...
-
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Just wanted to give the post a bump, as I am still trying to work through this issue.
-
Wwindowsdesxtop replied to the thread Easy Way to Automatically Forward Ports to VM's / LXC Containers.I'm also interested in this.
-
Jjanus57 replied to the thread PBS backup space grow up constantly.Hi, You should really check the backup log to have the exact data size. For VMs with small data changes (as you said), 50 to 70GB a day seems a lot to me, or you just don't know that your VMs really have a high data change, and therefore your...
-
Zzork reacted to SWEETGOOD's post in the thread Allow migration and replication of disks on ZFS encrypted storage with
Like.
Looks like the most recent version of PROXMOX 9.2.2 has implemented a permanent fix for this, see this commit: https://git.proxmox.com/?p=pve-storage.git;a=commit;f=src/PVE/Storage/ZFSPoolPlugin.pm;h=c705a2c03f2c5a9c67695d5d998925875d95c50b... -
Ddaanw reacted to DerekG's post in the thread High boot disk usage on Proxmox 9.2 node (Ext4) with Like.
Oh, what an idiot I am, I unmounted the shares as many have suggested, and found 14GB of YouTube videos hiding in one of the /mnt directories. I've deleted them and now the boot drive is down to 9GB. Now I'm going to have to double-check all...
-
Falk R. replied to the thread Local-lvm versehentlich gelöscht.Dann geh in den Ordner /etc/pve/lxc und da lösche die Konfigurationsdatei des CT 101. Dann ist der Container weg -
Falk R. replied to the thread Frage zu Best Practice: Automatisches Hochfahren der VM nach Stromausfall?.Die meisten USV kann man konfigurieren, dass erst bei einem bestimmten Batteriestand die Outlets wieder zugeschaltet werden. Dann bootet der Server erst bei z.B. 50% Kapazität. Damit hättest du das Problem behoben.
-
DDerekG replied to the thread High boot disk usage on Proxmox 9.2 node (Ext4).Oh, what an idiot I am, I unmounted the shares as many have suggested, and found 14GB of YouTube videos hiding in one of the /mnt directories. I've deleted them and now the boot drive is down to 9GB. Now I'm going to have to double-check all...
-
Aab9900 posted the thread Installing Proxmox Backup Server on Mac Mini (Late 2012) in Proxmox Backup: Installation and configuration.I was unable to get the Proxmox Backup Server 4.2 ISO Installer on a USB to get past the disk selection screen to install PBS on an old Mac Mini. I am able to turn on, see the USB disks (GRUB an EFI) to select from; but it hangs after sections. I...
-
I couldn't wait until tomorrow :). It is working now. Stupid mistake on my end. Thank you so much for getting me in the right place. I probably would have never gotten it. Much appreciated. -
Ccrawrj replied to the thread Noob with weird network issue.I couldn't wait until tomorrow :). It is working now. Stupid mistake on my end. Thank you so much for getting me in the right place. I probably would have never gotten it. Much appreciated.
-
AAleXSR700 reacted to shanreich's post in the thread PVE becomes unreachable via ethernet but OS is running with Like.
From another device in the same network you could run arping for your PVE IP and see if you get multiple responses.
-
Ddaanw replied to the thread Device names on linux guest, change between machine versions.It was not clear from your post you were talking about a guest. Interface naming conventions change in other distro's too. Which distro is on the guest? Is it a VM or LXC?
-
RolandK replied to the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9.in general - be careful with mdadm raid1 in conjunction with direct-io. there is a reason why proxmox discurages using it and is not supporting it either https://bugzilla.kernel.org/show_bug.cgi?id=99171 -
RolandK replied to the thread file system issue with block device passthrough.what does lsblk -f /dev/disk/by-id/usb-TO_Exter_nal_USB_3.0_2015033100081-0:0 tell ? and lsblk --version on host and inside vm ? also print fdisk -l for usb drive and for mapped drive inside vm
-
Ccrawrj replied to the thread Noob with weird network issue.OK, I think I see my mistake. I will do some additional testing tomorrow and report back. Thanks for your help!!!!!!
