Latest activity
-
FFlyByWire reacted to Impact's post in the thread Backup auf neues NAS / Permisison denied with
Like.
PBS macht meiner Meinung nach immer Sinn. Backups sind wesentlich kleiner und schneller. Der Stop Modus sollte eigentlich keinen temporären Speicher benötigen. -
FFlyByWire replied to the thread Backup auf neues NAS / Permisison denied.Genau so war es. Läuft jetzt sehr stabil, viel schneller und mit wesentlich weniger Ressourcenverbrauch auf meiner Synology als VM. Neben der Sicherung der VM's unter Proxmox mache ich einmal wöchentlich per cronjob noch ein backup vo´m /etc...
-
RRomanex replied to the thread Proxmox Virtual Environment 9.2 available!.tree /home/ /home/ └── tom └── sources └── infra └── pve-cd-builder ├── debian-base │ └── extra-repos │ ├── debian-trixie │ │ └──...
-
LLeopold31 replied to the thread PBS failure with kernel 7.0.That shouldn't take much time. I'll see if I can do that tonight. In the mean-time, I have my other PBS on kernel 7 (seemingly without problems) as well as my PVE. I started becoming concerned about what would happen to a restore. So a...
-
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Is there a way to remap everything correctly without the nightmare of doing them one by one?
-
BBlackclaws replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Leaving a link to this here as well so others looking for problems can see it: https://bugzilla.proxmox.com/show_bug.cgi?id=7627 TCP checksum offloading for virtio is broken for at least some NIC types on latest kernel + qemu for later linux...
-
MMarkku replied to the thread 8.4 to 9.2 upgrade.FWIW, I just today upgraded from 8.4.9 to 8.4.14 (or whatever was the latest 8.4) and to 9.2.2 today on two HPE servers (G11 or something, from 2025, with ZFS disks), using the mentioned official 8-to-9 guide. No problems, no need to pin the NIC...
-
AArcWeaver replied to the thread proxmox-kernel-7.0.2-6-pve failing network service.I can easily obtain the working journal but how would I obtain the broken journal? It breaks the network so I can't ssh to copy it. I'm also away from the physical machine so I can't risk getting locked out again. Any suggestions?
-
Nnpu3pak replied to the thread Proxmox Virtual Environment 9.2 available!.I'm really new user with limited knowledge on linux, nonetheless I was able to install version 9.1, iirc, without issues. Now with (I don't have the 9.1 anymore) the installer hangs on modprobe: FATAL: Module shpchp not found in directory...
-
BBubbagump210 replied to the thread VNC failing with SSH errors.Yes. I can SSH between them so the keys and authorized_keys are good for root.
-
FFreedbot replied to the thread [TUTORIAL] OpenWRT LXC "Forbidden Router".3rd post reserved for updates or in case I hit the generous word limit yet again when editing. I'm also working on writing a guide for self hosting behind CGNAT with Wireguard and PBR Split Tunneling on this OpenWRT setup. This means you can...
-
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.Here's what was in the logs right after plugging in the drive using journalctl --since "5 minutes ago": May 26 12:30:14 pve5 kernel: TEST_UNIT_READY: handle(0x0027) lun(0) May 26 12:30:14 pve5 kernel: START_UNIT: handle(0x0027), lun(0) May 26...
-
FFreedbot replied to the thread [TUTORIAL] OpenWRT LXC "Forbidden Router".Creating the OpenWRT LXC Container Installing OpenWRT into a container requires downloading a special build and installing it via Shell. Sadly, we can't use the Create CT button because there's no setting for an "unmanaged" OS type, and the...
-
MMadscientist replied to the thread 8.4 to 9.2 upgrade.i have 8 - 10g nic and 2 - 1 g nic, with a lot of vlan configured, ceph, cluster trafiic are segrigated, open vSwitch is configured on 8 out of 10 nic, i tried to use "pinned your NIC names" and find it very difficult and complicated to...
-
FFreedbot posted the thread [TUTORIAL] OpenWRT LXC "Forbidden Router" in Proxmox VE: Installation and configuration.Purpose Inspired by Level1Techs, I decided to replace my old router with a single box solution that's flexible, upgradable, and efficient. That includes using Proxmox to utilize spare resources without interfering with the vital router...
-
RResidentDataHoarder replied to the thread [SOLVED] CEPH OSD(s) failing to initialize after a hardware change.That's a really good Idea, I didn't think to do that! I just got back from an errand, I'll try that now!
-
TTErxleben replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Ich habe nun, dank dieses Gedankenaustauschs, gedanklich abgelegt, dass ein VM-Kernel v4, durchaus problembehaftet (funktionell?) in Verbindung mit einer qemu-Version unter einem Host-Kernel v7 ist. Wäre unerwartet und ätzend, da die Kapselung in...
-
Mmaxim.webster reacted to JD-iteee's post in the thread [SOLVED] Making best use of multiple NICs per Node with Like.
Hi Maxim, with 4x 2.5GbE per node and your setup using Corosync, HA and ZFS replication without Ceph, I would separate the traffic types as much as possible to keep the cluster stable and easier to troubleshoot. I would use one dedicated NIC...
-
TTErxleben replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Sollte auch nie Kritik sein. Freut mich sogar, wenn du dir die Mühe machst, solchen Nickligkeiten auf den Grund zu gehen. Wie du erwähnst hast, verfüge ich auch über viel Spieltrieb:) Darum meine Frage, ob sich das Anhalten der DMS-VM bis auf...
-
NYes. From our side no actual blockers for server/enterprise HW. Yes. If the server enterprise hardware on the horizon materializes: quite positive.