Latest activity

  • L
    Leopold31 replied to the thread PBS failure with kernel 7.0.
    I was referring to this report: https://www.linuxcompatible.org/story/linux-kernel-7010-released/ I have a heavy schedule the next few days so I don't see that I'll have time to get to more testing in right away. I'll see if I can get more...
  • A
    abufrejoval replied to the thread Proxmox VE arm64.
    Yes, that's what started as a fork by Jiangcuo and could easily take over the Proxmox niche, sooner or later... It's probably a good thing they aren't targeting x86 at the moment, but concentrating on "Chinese" home-grown CPU varieties, perhaps...
  • SWEETGOOD
    Thanks for pointing that out. I'm already monitoring the situation in my setup since using the upstream "fix" and did not recognize anything which I would call "significant". So can you specify what you meant with "significant speed disadvantage"?
  • jebbam
    Awesome, that order did the trick. All looks good. I did the same for nh5 too, so they are all up. Thanks 100x for all your help! Do you know why this may have happened? I've rebooted Proxmox nodes many times, including entire clusters that were...
  • SWEETGOOD
    I don't think so. The patch by selbitschka works very differently than the "fix" that Stoiko Ivanov authored and was commtted in pve-storage.git. The -w option enables raw sends, which sends the entire dataset as-is, it does not decrypt it, nor...
  • D
    dea replied to the thread Problem on LTO-9 with kernel 7.0.x.
    I had tried via the GUI, simply to list the available tapes, and no tapes were detected (with the 7.0.x kernel). After reverting to 6.17, everything started working perfectly again. From what I’ve read in various articles, it seems that the 7.0.x...
  • A
    abufrejoval reacted to acme2009's post in the thread Proxmox VE arm64 with Like Like.
    I use PXVIRT from the chinese fork on a Raspberry PI 5 with 16GB on Raspbery PI OS Trixie. If you use Trixie you get PXVIRT 9.0.10-2 at the moment. While using Bookworm you get only PXVIRT 8.x.
  • jebbam
    that looks good so far, the question mark is probably because pvestatd is not running yet on that node. could you try starting it and see if it goes "green" then? if it does, you can start the other services as well on that node. please then try...
  • G
    Wenn ich mich richtig erinnere ist der IT Mode vom P440AR im DL360/DL380 Gen9 nicht bootfähig so das man für ZFS noch ein SATA Boot device benötigt.
  • S
    I setup the PBS as a VM with the official repos and I have the exact same behaviour
  • O
    Looks like it's consistent with the error when run manually: root@redacted:~# qm guest cmd 101 fsfreeze-status { "error" : { "class" : "CommandNotFound", "desc" : "The command guest-fsfreeze-status has been disabled for this...
  • RolandK
    yes, i started from clean state and git status showed nothing special . also with exact these command, i get the same error/problem. could you (@fabian or someone else who is able to compile successfulle) perhaps post his package list, so i can...
  • C
    celemine1gig replied to the thread Failure to boot.
    Manually boot to a UEFI shell and boot from their, if possible. You can get prebuilt shells online (e.g. here: https://github.com/pbatard/UEFI-Shell/releases ). And then you just need a medium and put the shell-binary on it, inside the directory...
  • J
    I don't think so. The patch by selbitschka works very differently than the "fix" that Stoiko Ivanov authored and was commtted in pve-storage.git. The -w option enables raw sends, which sends the entire dataset as-is, it does not decrypt it, nor...
  • B
    This is reproducible, I've created a bug report and a reproducer script is attached: https://bugzilla.proxmox.com/show_bug.cgi?id=7627
  • T
    Ich zielte eher auf die PVE-Übersicht, als auf Werte einzelner VMs. Wenn du Zeit und Lust hast, solch seltsames Verhalten zu verfolgen, spricht natürlich nichts dagegen. Aber einen potentiellen, anderen Hypervisor virtualisiert zu betreiben...
  • P
    I have been making some integration tests and find out that the memberOf=cn=MyGroup,ou=gon,dc=example,dc=com in the User Filter field is enough to make it synchronize only users belonging to the MyGroup. Keep in mind to run openssl s_client...
  • J
    Hi Maxim, with 4x 2.5GbE per node and your setup using Corosync, HA and ZFS replication without Ceph, I would separate the traffic types as much as possible to keep the cluster stable and easier to troubleshoot. I would use one dedicated NIC...
  • P
    pille99 replied to the thread connecting sdn to edge firewall.
    more infos
    • sdn.drawio.png
  • N
    Maybe something is holding them from LVM activation. Could you boot host with unplugged not active HDD ? After that I would plug single HDD and look at the logs to understand what happens with LVM detection.