Latest activity
-
MSo I did my normal Proxmox system updates. (before 9.2 release yesterday) along side all my NIX and Windows 2025 updates. Reboot. My Dell R730XD couldnt find a boot disk. Just kept cycling. Used Proxmox VE 9.2 ISO to enter boot rescue via IDRAC...
-
-
MHello, I have a Proxmox server with some SAS cards: # lspci | grep SAS 51:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05) 8a:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS3416...
-
Sslavik-f replied to the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated.Installed Proxmox from 9.1 ISO: uname -a Linux t7960 6.17.2-1-pve #1 SMP PREEMPT_DYNAMIC PMX 6.17.2-1 (2025-10-21T11:55Z) x86_64 GNU/Linux Then switched to `no-subscription` repo and upgraded: apt update pveupgrade Computer rebooted...
-
SScaryGary replied to the thread Replace mirrored boot drives.Are you saying I don't really need to replace these? It's a hardware raid 1 using ThinkSystem M.2 with Mirroring Enablement Kit, so the drives only show up as a single device in the os. This is what the storage looks like on one of the nodes...
-
Rravage2k replied to the thread BackupPilot - Desktop Backup Client für Proxmox Backup Server.Habt ihr ein eigenes Forum oder einen Matrix-Chat? teste die Beta 5 und mein PBS sagt fehler bei der auth-id. ist das format für den benutzer username@pbs!tokenname ? irgendwo scheint hier was zu klemmen
-
SScaryGary posted the thread Replace mirrored boot drives in Proxmox VE: Installation and configuration.I've got two nodes running PVE 9.1.9 that are booting from mirrored 32GB M.2 Sata SSDs. All vms are on nfs storage. These nodes are repurposed Vmware ESXi:s and so far 32GB has been just enough. I'm unable to upgrade these to 9.2 however, since...
-
herzkerl reacted to bbgeek17's post in the thread Proxmox Virtual Environment 9.2 available! with
Like.
Happy to report that we have successfully run our storage-oriented CI/CD workflows against PVE 9.2, and no issues were uncovered during the initial test runs. Congratulations again on a solid release. Sincerely, Blockbridge Blockbridge ... -
herzkerl reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.2 available! with Like.
We are excited to announce the release of Proxmox Virtual Environment 9.2. This release focuses heavily on platform refinement, stability, and core optimization. Proxmox VE 9.2 is built on the robust Debian 13.5 "Trixie" and ships with Linux...
-
UdoB reacted to leesteken's post in the thread apt-get update exit code 100 after 8 to 9 upgrade with Like.
Code 100 =1&c[nodes][0]=16&o=date']can happen when the enterprise repository is activated (which it automatically is after such an upgrade) and you don't have a subscription key. Check your repositories in the Proxmox web GUI and/or the manual... -
Sslavik-f replied to the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated.And when I attempt to boot from Proxmox 9.2 ISO in the console mode: KERNEL PANIC!
-
-
Ssqlmaster replied to the thread [ANNOUNCE] Gorgona Notification Bridge for Proxmox VE.Gorgona Stheno, part 1 https://youtu.be/oyzwiag1Fcc Gorgona Stheno, part 2 https://youtu.be/ojyTizkcEQQ Gorgona Stheno, part 3 https://youtu.be/nK7DgYYHVKQ
-
Sslavik-f replied to the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated.I also tried DEBUG mode. Below, the output from debug boot log: ``` I'm booting Proxmox installer on Dell Precision workstaiton, I'm using nomodeset parameter. It starts and hangs. Here is logs: ``` Proxmox VE 9.2 (iso release 1) -...
-
Sslavik-f posted the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated in Proxmox VE: Installation and configuration.System: - Dell Precision T7960 - Intel Xeon W5-3425 - Nvidia RTX 4090D - 2 of NIC Intel cards Starting Proxmox installer from USB ISO. Tried Graphic mode, Text mode, used nomodeset. Same result: log out put prints few lines. Last line: waiting...
-
-
Ooptical posted the thread apt-get update exit code 100 after 8 to 9 upgrade in Proxmox VE: Installation and configuration.In addition to the tty errors now I have this red bar showing up as well in the Tasks area at the bottom. apt-get failed, code 100
-
-
aaron replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Schalt mal die "Host Memory" Datenlinie im RAM Graphen ein (in die Legende klicken). Das ist die Host sich, sprich mit dem Overhead dazu. Irgendwelche PCI devices scheinen nicht durchgereicht zu sein, das würde eine volle Auslastung erklären... -
Dd.konyayev replied to the thread ceph-osd crashes with kernel 6.17.2-1-pve on Dell system.hp dl380g11 megaraid no problem.
-
Ggfngfn256 replied to the thread Issue with maintenance mode in custer.AFAIK you can't. You will have to set ha-manager set vm:<VMID> --state stopped before the shutdown command issued in the VM to shutdown & not have it restarted.
-
Ffruchtzwerg replied to the thread [TUTORIAL] Developer Workstation (Proxmox-VE 9) with cinnamon (LMDE7).To give a wider perspective of my considerations: 1. Desktop on the proxmox host: Installing LMDE on the proxmox host has its pros and cons. It's an advantage that the system directly boots into the cinnamon interface and within that you can...
-
PPekeltje posted the thread Wisdpi 5Gbps USB not working in Proxmox VE: Installation and configuration.Hello, Im using 1 of my Internal NICs for Proxmox, that i want to keep using for Proxmox and HomeAssistOS that is running on Proxmox. But i want to use the WisdPi 5Gbps adapter for the Truenas VM that im running, currently also still on the...
-
BBubbagump210 replied to the thread VNC failing with SSH errors.Yes, this is on every node of the cluster.
