Latest activity
-
SScaryGary replied to the thread Replace mirrored boot drives.Are you saying I don't really need to replace these? It's a hardware raid 1 using ThinkSystem M.2 with Mirroring Enablement Kit, so the drives only show up as a single device in the os. This is what the storage looks like on one of the nodes...
-
Rravage2k replied to the thread Erste Testuser für BackupPilot gesucht.Habt ihr ein eigenes Forum oder einen Matrix-Chat? teste die Beta 5 und mein PBS sagt fehler bei der auth-id. ist das format für den benutzer username@pbs!tokenname ? irgendwo scheint hier was zu klemmen
-
SScaryGary posted the thread Replace mirrored boot drives in Proxmox VE: Installation and configuration.I've got two nodes running PVE 9.1.9 that are booting from mirrored 32GB M.2 Sata SSDs. All vms are on nfs storage. These nodes are repurposed Vmware ESXi:s and so far 32GB has been just enough. I'm unable to upgrade these to 9.2 however, since...
-
herzkerl reacted to bbgeek17's post in the thread Proxmox Virtual Environment 9.2 available! with
Like.
Happy to report that we have successfully run our storage-oriented CI/CD workflows against PVE 9.2, and no issues were uncovered during the initial test runs. Congratulations again on a solid release. Sincerely, Blockbridge Blockbridge ... -
herzkerl reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.2 available! with Like.
We are excited to announce the release of Proxmox Virtual Environment 9.2. This release focuses heavily on platform refinement, stability, and core optimization. Proxmox VE 9.2 is built on the robust Debian 13.5 "Trixie" and ships with Linux...
-
UdoB reacted to leesteken's post in the thread apt-get update exit code 100 after 8 to 9 upgrade with Like.
Code 100 =1&c[nodes][0]=16&o=date']can happen when the enterprise repository is activated (which it automatically is after such an upgrade) and you don't have a subscription key. Check your repositories in the Proxmox web GUI and/or the manual... -
Sslavik-f replied to the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated.And when I attempt to boot from Proxmox 9.2 ISO in the console mode: KERNEL PANIC!
-
-
Ssqlmaster replied to the thread [ANNOUNCE] Gorgona Notification Bridge for Proxmox VE.https://youtu.be/ojyTizkcEQQ?t=1253
-
Sslavik-f replied to the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated.I also tried DEBUG mode. Below, the output from debug boot log: ``` I'm booting Proxmox installer on Dell Precision workstaiton, I'm using nomodeset parameter. It starts and hangs. Here is logs: ``` Proxmox VE 9.2 (iso release 1) -...
-
Sslavik-f posted the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated in Proxmox VE: Installation and configuration.System: - Dell Precision T7960 - Intel Xeon W5-3425 - Nvidia RTX 4090D - 2 of NIC Intel cards Starting Proxmox installer from USB ISO. Tried Graphic mode, Text mode, used nomodeset. Same result: log out put prints few lines. Last line: waiting...
-
-
Ooptical posted the thread apt-get update exit code 100 after 8 to 9 upgrade in Proxmox VE: Installation and configuration.In addition to the tty errors now I have this red bar showing up as well in the Tasks area at the bottom. apt-get failed, code 100
-
-
aaron replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Schalt mal die "Host Memory" Datenlinie im RAM Graphen ein (in die Legende klicken). Das ist die Host sich, sprich mit dem Overhead dazu. Irgendwelche PCI devices scheinen nicht durchgereicht zu sein, das würde eine volle Auslastung erklären... -
Dd.konyayev replied to the thread ceph-osd crashes with kernel 6.17.2-1-pve on Dell system.hp dl380g11 megaraid no problem.
-
Ggfngfn256 replied to the thread Issue with maintenance mode in custer.AFAIK you can't. You will have to set ha-manager set vm:<VMID> --state stopped before the shutdown command issued in the VM to shutdown & not have it restarted.
-
Ffruchtzwerg replied to the thread [TUTORIAL] Developer Workstation (Proxmox-VE 9) with cinnamon (LMDE7).To give a wider perspective of my considerations: 1. Desktop on the proxmox host: Installing LMDE on the proxmox host has its pros and cons. It's an advantage that the system directly boots into the cinnamon interface and within that you can...
-
PPekeltje posted the thread Wisdpi 5Gbps USB not working in Proxmox VE: Installation and configuration.Hello, Im using 1 of my Internal NICs for Proxmox, that i want to keep using for Proxmox and HomeAssistOS that is running on Proxmox. But i want to use the WisdPi 5Gbps adapter for the Truenas VM that im running, currently also still on the...
-
BBubbagump210 replied to the thread VNC failing with SSH errors.Yes, this is on every node of the cluster.
-
PPekeltje replied to the thread [SOLVED] VM not starting after Proxmox Upgrade.Turns it i was a complete idiot. Because i was having problems with the Upgrade from 8.2 to 9.2 and trying to get my USB Ethernet 5Gbps working i changed some things about the truenas VM. With the testing it seems i removed my USB HDDs that are...
-
FFoobars replied to the thread VLAN not working after upgrade from pve8 to pve9.This most be a somewhat recent change, not since the start of 9, just added some nodes to an existing 9 cluster that show this issue Also thanks for the research and fix
-
FFlocki replied to the thread [SOLVED] SDN Fabric issues since update 9.1.14.I'd call it semi-stable. As long as nothing is touched it is working on /24. However as soon as the SDN config is reapplied or any node is rebooted it will require manual intervention.
