Latest activity

  • P
    pongomongo replied to the thread Proxmox won't boot.
    #lsblkin normal boot shows the VMs Flint-SMB is the network smb share. Probably shows offline because the PVE box is disconnected from the network. (monitor and router are far apart) # pvesm status ip ashows the primary bridge vmbr0 as UP...
    • lsblk normal boot.jpg
    • pvesm status.jpg
  • P
    pongomongo replied to the thread Proxmox won't boot.
    zfs list shows the same as in post #23 (immediately after zpool import flash in recovery mode) Frustratingly, I am still unable to ping or reach the pve host via browser. There is no recognition of the pve host by the router, all this even...
  • P
    pongomongo replied to the thread Proxmox won't boot.
    OK! Following this post: https://forum.proxmox.com/threads/is-there-a-way-to-disable-the-automatic-start-of-vms-before-proxmox-boots.83636/ I disabled Virtualization in the BIOS. I am now able to boot into the PVE host.
  • P
    pongomongo replied to the thread Proxmox won't boot.
    Proxmox boots, then immediately crashes. The PC does not turn off, it stays running. Recovery mode is functional, rescue boot is not. Is there a way to disable "start at boot" for the VMs and LXCs from the recovery mode CLI? That way I could...
  • P
    pongomongo replied to the thread Proxmox won't boot.
    Ok. I tried: -boot to recovery mode -remove "intel_iommu=on" from /etc/default/grub -# update-grub -reboot, normal boot Same result. Boots to login screen, then immediately goes black. -insert live boot usb -boot to proxmox rescue boot Same...
  • D
    Hi everyone, I’m running into a very strange networking/TLS issue on my Proxmox host and getting extremely infuriated - I’m looking for suggestions on what to test next. The main symptom is that large HTTPS downloads fail with TLS/decryption...
  • P
    pongomongo replied to the thread Proxmox won't boot.
    rescue boot does the same thing---boots to login then goes black almost immediately yes- the Intel iGPU is passed through to a VM using "intel_iommu=on"
  • P
    pongomongo replied to the thread Proxmox won't boot.
    I can run commands in recovery mode... At this point, maybe it is easier to just reinstall Proxmox? Is there a good way to create backups of Proxmox config files from the recovery mode CLI? I have backups for the VMs and LXCs, and the data on...
  • P
    pongomongo replied to the thread Proxmox won't boot.
    No. For all of the troubleshooting we were doing earlier, I had the pve box connected to a monitor booted into recovery mode. That is where I observed the straight to black screen. I just tried reconnecting the pve box to the network. The router...
  • P
    pongomongo replied to the thread Proxmox won't boot.
    Ok...so I tried deleting the unit file and rebooting Proxmox with a normal boot. The boot screen passed by without showing any obvious errors and went directly to the Proxmox shell, showing the correct IP address and asking for login. This...
  • I
    ivenae replied to the thread Add a button for email forwarding.
    Ask Claude Opus, it maybe can help you. I already solved a few things with AI
  • P
    pongomongo replied to the thread Proxmox won't boot.
    ok. just to clarify this out a bit----if I delete the unit file and boot up Proxmox without the 2TB problem drive mounted-----should I then be able to re-add the 2TB nvme drive to the database storage without damaging the subvolume mountpoints...
  • P
    pongomongo replied to the thread Proxmox won't boot.
    @Impact ---OK, progress!! I did zpool import flash then zfs list The subvolumes and associated mountpoints are listed. Furthermore, when I cd into the /flash/subvol-... directories, the expected data is present. I think this confirms that the...
    • zfs list.jpg
  • J
    Ich bin nicht der OP, aber ich antworte dennoch mal..., nur zu Unterhaltungszwecken... Naja..., warum nicht so arbeiten? Ich verwende PVE extensiv an mehreren Stellen, in meinem Keller läuft ein (total oversized) Cluster. Mit den üblichen...
  • J
    Johannes S reacted to jaminmc's post in the thread Kernel 6.14 - End of Support with Like Like.
    Thank you all for your hard work in mitigating the identified kernel exploits and backporting the fixes. We greatly appreciate your efforts! With these security updates in mind, has the Proxmox team considered implementing live kernel patching...
  • J
    Johannes S reacted to t.lamprecht's post in the thread Kernel 6.14 - End of Support with Like Like.
    We will re-evaluate it, but cannot make any promises. What we also look into periodically is reducing the attack surface in general, like we started rolling out some simple but relatively effective approach to block autoloading of various niche...
  • J
    Johannes S reacted to t.lamprecht's post in the thread Kernel 6.14 - End of Support with Like Like.
    The deprecation itself was not strongly influenced by that, but the decision to communicate it more actively was in fact primarily driven by it. Normally, we only mentioned it on the side once a new kernel became the default. In the past, we...
  • J
    Johannes S reacted to bbgeek17's post in the thread Kernel 6.14 - End of Support with Like Like.
    Out of curiosity, is this decision primarily driven by the recent wave of Kernel security vulnerability disclosures, or has there been a particular subsystem or area in the 6.14/6.17 series that has proven especially difficult to stabilize...
  • J
    Johannes S reacted to t.lamprecht's post in the thread Kernel 6.14 - End of Support with Like Like.
    Hello, Given the recent high churn of problematic issues, we decided to more actively announce the end of support for the 6.14-based kernel series. We prolonged the life of that series significantly beyond what was originally planned. At the...
  • J
    Johannes S reacted to sterzy's post in the thread Dev input please on Microsoft CA 2023 with Like Like.
    The certificate expires on June 27, 2026. After that, Microsoft will no longer be able to sign shims with that certificate. Then it'll depend on how quickly Debian (and other distributions) will release new shims. However, you can simply enroll...