Latest activity
-
JI have an NFS share on my TrueNAS that doesn't work on one of my nodes in a 3 node cluster. When I try to access it via shell I get an input/output error, and in the web UI the backup shows as empty, when the other nodes show all my backups. All...
-
Ggasherbrum replied to the thread Storage options for a (3) node cluster with local NVMe disks and 25G network..i think this looks pretty normal if you are using a switch, for me inside a VM i can pretty much get near the same IOPS as the ceph pool itself, so it would be worth checking the VM disk config why you are getting 500 rather than 15,000 for...
-
AAptadmin replied to the thread Storage options for a (3) node cluster with local NVMe disks and 25G network..Total time run: 60.0012 Total writes made: 910491 Write size: 4096 Object size: 4096 Bandwidth (MB/sec): 59.2755 Stddev Bandwidth: 1.37628 Max bandwidth (MB/sec): 62.0977 Min bandwidth (MB/sec)...
-
Ggasherbrum replied to the thread Storage options for a (3) node cluster with local NVMe disks and 25G network..try using the built in rados bench for ceph benchmarking rados bench -p your_pool_name 60 write --no-cleanup -b 4K -t 16 for your info, my setup is mesh network 40g, mtu 9000 (connectx3 kind of suck because of higher latency, connectx4+ should...
-
AAptadmin replied to the thread Storage options for a (3) node cluster with local NVMe disks and 25G network..This is helpful, can you tell me more about your home lab? You have (3) machines with 1TB SSDs, 9700k cpus, and connectx3 cards? How are they connected? 10G ethernet? Did you do anything special with ceph tuning or ip stack tuning? Do you...
-
EeXsoR replied to the thread [SOLVED] Why is wireguard-tools a dependency of libpve-network-perl?.I greatly appreciate your input on this. I don't use or intend to use SDN at all, so I'm happy just removing it for now.
-
EeXsoR reacted to leesteken's post in the thread [SOLVED] Why is wireguard-tools a dependency of libpve-network-perl? with
Like.
https://git.proxmox.com/?p=pve-network.git;a=commit;h=2bd38d19029970e82b9d562f61e63562a924a4a8 EDIT: I don't have an opinion on this dependency either way. I just managed to find the commit that added it with an explanation due to Proxmox being... -
Tthomasnagel replied to the thread Not opening web interface from Daily Spam Report.Strangely - with a mail from the PMG I just received I am able to access the Quarantine Website again.
-
Oocwypyziuleh replied to the thread proxmox rescue boot no such device pool after upgrading to proxmox 9.A lil bit off-topic but i have stumbled on a problem with "kernel panic Attempted to kill init! exitcode=0x00000200" The problem was unrelated because after failed update i was missing package zfs-initramfs in my initramfs I have swapped HBA...
-
JJohannes S reacted to leesteken's post in the thread [SOLVED] Why is wireguard-tools a dependency of libpve-network-perl? with Like.
https://git.proxmox.com/?p=pve-network.git;a=commit;h=2bd38d19029970e82b9d562f61e63562a924a4a8 EDIT: I don't have an opinion on this dependency either way. I just managed to find the commit that added it with an explanation due to Proxmox being...
-
Rryanb posted the thread Configure S3 Storage-Class with S3 integration? in Proxmox Backup: Installation and configuration.I've been searching for a few days and haven't been able to find much on this. Seems like it may not be supported yet. We use an S3 secure storage service for our offsite backups. The storage tier we pay for uses standard infrequent access. At...
-
Bbitranox reacted to bossanova808's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
A follow up to my and @Gnosh reports about the issue with Tailscale asymmetric performance and Kernel 7. The issue is easily tested and reproducible with iperf3 across Tailscale. I have reproduced it both within my local network and across...
-
LLordIcon replied to the thread Lenovo MiniPC - Proxmox stürzt ab?!.vielen dank!
-
LDa ich das gleiche Modell habe poste ich das mal für dich # cat /sys/class/dmi/id/product_family ThinkCentre M920q # lspci -vnnk -d ::0200 00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (7) I219-LM [8086:15bb] (rev...
-
LDas Problem ist doch schon gelöst. Es handelt sich um das klassische Intel-NIC-Problem.
-
LLordIcon replied to the thread Lenovo MiniPC - Proxmox stürzt ab?!.Danke das habe ich direkt beim kauf gemacht. ist alles auf default und bios ist UPtoDate
-
EeXsoR posted the thread [SOLVED] Why is wireguard-tools a dependency of libpve-network-perl? in Proxmox VE: Installation and configuration.I upgraded one of my hosts to PVE 9.1.0 today and noticed that it installed wireguard-tools, and when investigating why, it seems it's a dependency of libpve-network-perl. When looking at the release notes, I didn't see any mention of this. Is...
-
-
JJohannes S replied to the thread PVE upgrade 6.4 to 7, 8, 9....Where did you get, that they don't got to Buster? They actually I could open following links on the page: https://archive.debian.org/debian/dists/buster/ https://archive.debian.org/debian/dists/buster-updates/...
-
RRiderofDragons68 posted the thread Proxmox Virtual Environment 9.1.7 file locations in Proxmox VE: Installation and configuration.I had my TrueNas server crash, I have rebuilt and recreated the nfs file shares but can't figure out how to reconnect the VM's
