Latest activity
-
UdoB reacted to storpool_tech's post in the thread Dutch Proxmox Day 2026: Meet us there, in person... with
Like.
Hi Team, As a freshly announced Proxmox partner (https://proxmox.com/en/about/company-details/press-releases/storpool), we just wanted to say "hi" to the community. Also, a big "thank you" to @tuxis for "Dutch Proxmox Day 2026" - the biggest... -
UdoB reacted to celemine1gig's post in the thread [SOLVED] RAM in Proxmox nur teilweise erkannt - 188 GB von 256 GB with Like.
Klingt nach einem recht klassischen Problem mit Server-Boards, die bei nicht voll-kompatibler RAM-Bestückung einzelne/einige Dimms deaktivieren. Höchtwahrscheinlich sind die ~188GB nichts anderes als 2 nicht erkannte (deaktivierte) Dimms, was...
-
Ccelemine1gig replied to the thread [SOLVED] RAM in Proxmox nur teilweise erkannt - 188 GB von 256 GB.Klingt nach einem recht klassischen Problem mit Server-Boards, die bei nicht voll-kompatibler RAM-Bestückung einzelne/einige Dimms deaktivieren. Höchtwahrscheinlich sind die ~188GB nichts anderes als 2 nicht erkannte (deaktivierte) Dimms, was...
-
Sstorpool_tech posted the thread Dutch Proxmox Day 2026: Meet us there, in person... in Proxmox VE: Installation and configuration.Hi Team, As a freshly announced Proxmox partner (https://proxmox.com/en/about/company-details/press-releases/storpool), we just wanted to say "hi" to the community. Also, a big "thank you" to @tuxis for "Dutch Proxmox Day 2026" - the biggest...
-
Ccelemine1gig replied to the thread [SOLVED] Linux BRIDGE weiter IPv4 Adressen.Nicht ganz on-topic, aber vielleicht für den ein oder anderen trotzdem interessant. Für mich läuft das im Großen und Ganzen unter dem Thema "Mögliche Einsparung wichtiger Lebenszeit". Man führe sich das folgende zu Gemüte, dann wundert einen die...
-
Andere Leute mit ähnlichen Problemen freuen sich sicher, wenn du genauer erklärst, was es nun war und wie du es gelöst hast. -
SSunilkumar reacted to stefanxinc's post in the thread VM's not being moved over OpenFabric with Like.
Thanks did not see that :)
-
SHi, did you select the correct migration network in the settings? I.e. under Datacenter > Options > Migration Settings the network that should be used for migration traffic can be explicitly selected.
-
SSunilkumar reacted to stefanxinc's post in the thread VM's not being moved over OpenFabric with Like.
Hi All, I've setup open fabric on my 3 Node cluster which have 2 NIC's Each, 1 for Data (Internet Access etc..) and 1 for Open Fabric. Data NIC is 1G interface connected to a Mikrotik switch while the Open Fabric NICs are all 10G and connected...
-
SSunilkumar reacted to Cube's post in the thread External Hard Drives Included in Backups Despite Being Excluded with Like.
This is resolved It appears that you may need to restart the VM in order for the backup=0 to apply under VM > Hardware
-
SSunilkumar reacted to Cube's post in the thread External Hard Drives Included in Backups Despite Being Excluded with Like.
I passed two external hard drives to an OMV VM with the following commands: /sbin/qm set 100 -scsi2 /dev/disk/by-id/ID And i excluded the disks from backups: However the backup job failed with the following in the log: INFO: 0% (125.2 MiB...
-
SSunilkumar reacted to t.lamprecht's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
yes, we indeed uploaded a proxmox-kernel-7.0.0-2-pve-signed package to circumvent this versioning "issue", over adapting the simpler ordering algorithms of the proxmox-boot-tool. As while the versions were correctly ordered from the POV of apt...
-
SSunilkumar reacted to jaminmc's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Although this is the official Linux Kernel 7.0.0 release, it is still classified as beta since Ubuntu 26.04 has not yet been released. Proxmox leverages the Ubuntu kernel, enhanced with custom compile flags, built-in ZFS support, and patches...
-
SSunilkumar reacted to jaminmc's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
The issue occurs because the bootloader interprets the version 7.0.0-1-rc7-pve as greater than 7.0.0-1-pve when comparing versions. The simplest solution is to run apt purge proxmox-{kernel,headers}-7.0.0-1-rc* to remove the affected packages...
-
SSunilkumar reacted to obiwantoby's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Really appreciate the 7.0 preview here. I've had very specific issues, exotic , some might say stupid setup with Opnsense as a guest VM with a Mellanox 4 LX (mlx5 drivers) as a passthrough. I had to hard reset over and over, as software reboots...
-
SSunilkumar reacted to monkfish's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Here you go - in case you've not already found it this is courtesy of @uzumo in this thread...
-
SSunilkumar reacted to uzumo's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Some people say that SRIOV has been deprecated in the i915 driver. Furthermore, I believe that METs that do not support SRIOV in the XE driver will not work as a result. Wouldn’t it be better to discuss this on Intel’s Git...
-
SSunilkumar reacted to spokespersonneighbor's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Im really confused about intel new naming scheme, but Im assuming 245K is Core Ultra 100 series (Meteor Lake) and Core Ultra 200 is new release of Arrow Lake Refresh? Anyway, it works just fine with patched strongtz/sriov-dkms on 6.19 and does...
-
SSunilkumar reacted to spokespersonneighbor's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Doesnt work on my 245K [ 4.241268] i915 0000:00:02.0: driver does not support SR-IOV configuration via sysfs<br> Even when lspci is showing it is supported Capabilities: [320 v1] Single Root I/O Virtualization (SR-IOV) IOVCap...
-
SSunilkumar reacted to Gnosh's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Running a tailscale subnet router on a VM and after upgrading the download speed tanked to ~0.2 Mbps from normal ~100Mbps. Weirdly the upload speed was fine. Tested using openspeedtest on another VM and both of them are up to date Debian trixie...