Latest activity
-
Aadmingsi posted the thread Outgoing mail gets SPF_FAIL / KAM_DMARC_QUARANTINE in PMG despite final SPF/DKIM PASS in Mail Gateway: Installation and configuration.Hello, I have a setup where outbound mail is routed through Proxmox Mail Gateway: Backend mail server -> PMG -> Internet PMG is also configured to DKIM-sign outgoing messages. The problem is that PMG spam analysis for outgoing mail reports...
-
Hhk135 posted the thread iPXE No longer detecting Virtio Nic in Proxmox VE: Installation and configuration.Hi There So I have seen a few other threads that have addressed pxe booting issues but none that seem to cover this. I have built an iPXE iso with an embedded script to boot from in networks without DHCP. Been using this setup a while and it...
-
Ddaanw replied to the thread EFI Out of Space.As you also didn't have the 6.8 metapackage, 6.8.4-2-pve-signed was maybe once installed manually? Looking at your dpkg output I feel a strong urge for apt purge ~c (purges all rc packages with only config files remaining) ;-) Assuming UEFI boot...
-
Kkarypid replied to the thread Mask calculation for SDN subnets question.I have been running using 168.192.in-addr.arpa since it seems to be "what just works out of the box". Another thing I noticed is that if you go to SDN --> IPAM and remove an IP mapping: - the reverse mapping is (correctly) removed from powerdns...
-
JI am on 6.17 for now, but might go back to 7.0 as I hadnt observed issues, interestingly 7.0 has slightly lower CPU usage.
-
JSame here on my Proxmox with Ryzen 5700G. Seems to be a little bit more efficient. I can observe it also on my 4 LMDE7 (debian 13 based) desktops with Ryzen CPU with backport kernel 7.0.4. For the Debian VM's itself I can't say more, because...
-
JPurging proxmox-kernel-6.17.13-1-pve-signed like Markku said will probably resolve the situation for now. proxmox-kernel-6.17.13-1-pve-signed and proxmox-kernel-6.17.13-1-pve (without -signed) are distinct packages. Your EFI partition is...
-
Ddaanw replied to the thread EFI Out of Space.Purging proxmox-kernel-6.17.13-1-pve-signed like Markku said will probably resolve the situation for now. proxmox-kernel-6.17.13-1-pve-signed and proxmox-kernel-6.17.13-1-pve (without -signed) are distinct packages. Your EFI partition is...
-
Kkarypid posted the thread Mask calculation for SDN subnets question in Proxmox VE: Installation and configuration.Hello, I have set up PowerDNS and have added it in SDN --> Options with success (proxmox can create entries there). I have come across a problem with the reverse DNS zone calculation used: - I have a 192.168.43.0/24 subnet - I expect proxmox...
-
CCube replied to the thread External Hard Drives Included in Backups Despite Being Excluded.This is resolved It appears that you may need to restart the VM in order for the backup=0 to apply under VM > Hardware
-
JIch habe das bei mir sehr einfach gelöst mit einer kleinen OMV VM welche mir auf einen Schlag dann alles relevante zur Verwaltung und Zustand des ZFS Pools, HDDs etc. anzeigt. Auch die Rsync Scripte laufen perfekt und Informieren mich per...
-
CCube posted the thread External Hard Drives Included in Backups Despite Being Excluded in Proxmox VE: Installation and configuration.I passed two external hard drives to an OMV VM with the following commands: /sbin/qm set 100 -scsi2 /dev/disk/by-id/ID And i excluded the disks from backups: However the backup job failed with the following in the log: INFO: 0% (125.2 MiB...
-
-
Ppulipulichen posted the thread Using GCP Always Free e2-micro as a QDevice for a 2-node Proxmox VE cluster: any pitfalls? in Proxmox VE: Installation and configuration.Hi all, I am planning to build a 2-node Proxmox VE cluster and would like to use a cloud-hosted QDevice/qnetd instance on Google Cloud Platform. My goal is to keep the QDevice VM within the GCP Always Free tier if possible. My current GCP VM...
-
EErrorHunter replied to the thread [SOLVED] Linux BRIDGE weiter IPv4 Adressen.ich habe nen anbieter. dort habe ich neu proxmox installiert und dann per cluster verbunden, Proxmox Versionslog: proxmox-ve: 9.1.0 (running kernel: 7.0.2-4-pve) pve-manager: 9.1.11 (running version: 9.1.11/8eac2c86f015bdda)...
-
WWeltherrscher replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Kernel 7.0.2-3 has some Issues with VFs on an Intel X540, I use virtual function passtrough for iSCSI performance on my NAS VM (TrueNAS Scale). After some time running, the VF stops working an connection to iSCSI is lost, wich causes several...
-
Sstefanxinc replied to the thread VM's not being moved over OpenFabric.Thanks did not see that :)
-
SHi, did you select the correct migration network in the settings? I.e. under Datacenter > Options > Migration Settings the network that should be used for migration traffic can be explicitly selected.
-
AArpxqq replied to the thread Bester Weg für Fileserver (samba).Ich habe das bei mir sehr einfach gelöst mit einer kleinen OMV VM welche mir auf einen Schlag dann alles relevante zur Verwaltung und Zustand des ZFS Pools, HDDs etc. anzeigt. Auch die Rsync Scripte laufen perfekt und Informieren mich per...
-
Hi, did you select the correct migration network in the settings? I.e. under Datacenter > Options > Migration Settings the network that should be used for migration traffic can be explicitly selected. -
MMarkku replied to the thread EFI Out of Space.Did you already try purging the -signed package? apt purge proxmox-kernel-6.17.13-1-pve-signed
