Latest activity
-
Uuzumo reacted to Scivaro's post in the thread GMKTec NucBox K11 - AMD 8945HS / 780M Windows 11 VM GPU Passthrough with
Like.
[SOLVED] GMKtec NucBox K11 / AMD 8945HS 780M GPU Passthrough — Complete Working Solution After extensive debugging I got full AMD Radeon 780M (Phoenix3, 1002:1900) passthrough working on Proxmox 9.1.9 — including surviving Windows restarts... -
Ppbliedung posted the thread Configering a Cluster with only one node (first) in Proxmox VE: Installation and configuration.Hello everybody, I would like to know if configering a cluster with only one node and attached storage is possible. The problem: One of my customers would like ot migrate from one hypervisor to proxmox. They need to keep their current hosts...
-
CChimKenda replied to the thread Lattepanda Sigma Intel Raptor Lake iGPU Passthrough.Huhu, danke für euren Input, ich hab den Post mal angepasst damit man es besser lesen kann ;) Ich hab das mit den erweiterten Funktionen ausprobiert und auch das mit der ROMbar, sowie das ich die GPU auf Primary setze und die anzeige auf "none"...
-
Mmunchworker reacted to Upstairs_Cycle384's post in the thread Trying to enable nested virtualization results in perfomance loss on vm with Like.
You are missing three things: 1. Hyper-V enlightenments enabled. Enable as many as you can that are performance driven 2. MBEC support enabled. This is most critical. Your processor supports it but you are not exposing that to the guest 3. A...
-
Mmunchworker replied to the thread Trying to enable nested virtualization results in perfomance loss on vm.1. I will check Hyper-V enlightenments out 2. MBEC needs exposing, i will test this and post an update 3. For this I need to check if the nvidia vGPU drivers are already supporting this kernel.
-
UdoB reacted to Martin.B.'s post in the thread [SOLVED] cannot take snapshot: local ZFS uses raw for vdisks / cannot change to qcow with Like.
Thanks you all for the fast comments. I could not start a snapshot in the GUI, the button "Take snapshot" was greyed out every time i tried. The problem was, as often, sitting in front of the keyboard.... and now i feel really bad. I just... -
Mmunchworker reacted to Impact's post in the thread Trying to enable nested virtualization results in perfomance loss on vm with Like.
There's a few discussions about this like this: https://forum.proxmox.com/threads/the-reasons-for-poor-performance-of-windows-when-the-cpu-type-is-host.163114/
-
Mmunchworker replied to the thread Trying to enable nested virtualization results in perfomance loss on vm.Thank you for your input, the host has 2 xeon processors which amounts to a total of 112 cores. 16 Cores for every machine would be a bit much current setup is 12 cores and the one shown hast 16 cores for testing. Furthermore the VMs are used as...
-
dcsapak replied to the thread Intel Arc Pro B50 SR-VIO not working.can you post the full vm config? (qm config ID) and which driver did you try to install exactly (on which windows version?) EDIT: also the mapping config would be interesting -
Aabamalu reacted to kd-infradijon's post in the thread [SOLVED] Corosync - Cluster retransmit issues | pmxcfs / corosync synchronization problems | Proxmox cluster 3 nodes with Like.
Hello everyone, The problem was solved, and it was more twisted than one might have imagined. The interfaces of each of our cluster nodes could in fact communicate in a stable way for Corosync only in 10Gbps or 25Gbps. What was totally...
-
Hharunk posted the thread S3 Hetzner failures with Gargbage collection in Proxmox Backup: Installation and configuration.Hello, i have s3 datastore configured with Hetzner and the Garbage collection is failing consistently with the following error. The backups to s3 are running fine without any issues. Any ideas on what to check ? Thanks...
-
UdoB reacted to gfngfn256's post in the thread [SOLVED] Are there any companies that extensively use PVE in daily production environments? with Like.
According to this page - in 2025 it was 6-digits (1,500,000 +)!
-
UdoB reacted to cwt's post in the thread [SOLVED] Are there any companies that extensively use PVE in daily production environments? with Like.
You can purchase different subscriptions to receive support directly from Proxmox (fast and very professional) if desired. Proxmox VE and their other products are very mature. We use their products on every customer site, ranging from small...
-
dcsapak replied to the thread Proxmox 9.1.7 RTX 6000 Pro drops off PCI bus.yes that is possible... did you try with 'pcie_aspm=off' on the kernel commandline? alternatively you could try to set 'vfio-pci.disable_idle_d3=1' to prevent the card from going to d3 state in idle with the vfio-pci driver
-
UdoB replied to the thread Dheeraj Sudan and Meenu Hinduja-How do I debug kernel panic or boot issues during installation?.When you boot from your installation media, the first menu shows something like 1) "Install PVE" and 2) "Check media and install...". Make sure to use the second one, with "check". I've had problems (somewhere during the installation, not at the...
-
Ggfngfn256 replied to the thread [SOLVED] Are there any companies that extensively use PVE in daily production environments?.According to this page - in 2025 it was 6-digits (1,500,000 +)!
-
Ggfngfn256 reacted to LnxBil's post in the thread [SOLVED] Are there any companies that extensively use PVE in daily production environments? with Like.
What do you mean by extensively? Most people use it as their only virtualization platform in various setups for many years, even decades. A few years ago, there was a post by Proxmox stuff about the install numbers, yet I cannot find it anymore...
-
Bbossanova808 replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription.Already done, the LXC is seemingly irrelevant - the samba one is Debian13 with nothing but samba on it, but the issue also occurs with a Ubuntu 24.04 LXC with Jellyfin on it. I don't have (and don't really want) Tailscale installed on the PVE...
-
Ggfngfn256 replied to the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues?.You'll have a "cluster" in one building with only 2 nodes - that is also a no-no!
-
Ggfngfn256 replied to the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues?.From the docs: I'm surprised your cluster ever sees all of the nodes!