Latest activity
-
Sshactheorb replied to the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues?.96 packets transmitted, 96 received, 0% packet loss, time 95145ms rtt min/avg/max/mdev = 15.667/25.435/33.892/3.466 ms Not a shared medium as far as I'm aware, wired directly into ethernet switch > unifi router > ISP modem. It could definitely...
-
UUpstairs_Cycle384 replied to the thread [SOLVED] Trying to enable nested virtualization results in perfomance loss on vm.You are missing three things: 1. Hyper-V enlightenments enabled. Enable as many as you can that are performance driven 2. MBEC support enabled. This is most critical. Your processor supports it but you are not exposing that to the guest 3. A...
-
JJimmy Brown replied to the thread HBA passthough.Hey Leesteken- sorry for the late reply. I have been busy decorating the house and postponed the proxmox project. I have moved the HBA to PICE slot 1 and confirmed it works fine now. As a test, I tried to plug in the main partition of the SSD...
-
-
Mmartusi61 replied to the thread Connection error 596.DERIch habe mich bereits entschuldigt, aber Deutsch ist selbst mit Google Translate noch zu schwierig für mich. Ich hoffe, mein Fall kann jemandem helfen, da ich das Problem gelöst habe. Könnten Sie mir bitte die URL des englischen Forums geben?
-
gurubert replied to the thread [SOLVED] Node in other building keeps showing up as offline to other 2 nodes, possible corosync issues?.What is the network latency between the nodes on the network used for corosync? is this network on a shared medium? Can there be congestion? -
OOnslow replied to the thread Connection interrupt during backup.Welcome, @x1234 Try "fleecing". There is a thread with a similar case: https://forum.proxmox.com/threads/failed-backup-to-pbs-damages-vm.183459/post-852260
-
thats an understatement. the crucial bx series is one of the worst performing ssds i have ever seen, even on clients. you may use it as cold storage, but anything warm or hot will perform terrible on it. more so if its used with zfs/ceph. even...
-
Additionally, with just 3 nodes in a ceph cluster, make sure you have at least 4 OSDs in each. Because with just 2 per node, you will likely have issues if one of the OSDs fails. As then Ceph will recover the lost replicas to the only node it can...
-
Those are on the cheaper and slower side of consumer SSDs. They will not perform well with sustained load and the primarily sync writes that Ceph does. The recommendation for enterprise SSDs with power loss protection (PLP) is there for good...
-
DDeakia reacted to Impact's post in the thread [SOLVED] Help adding existing Volume to new container with
Like.
qm rescan/pct rescan can help here with attaching existing disks to a guest with the same ID. -
DDeakia replied to the thread [SOLVED] Help adding existing Volume to new container.Thank you so much! I did a combination of the first two suggestions you made. 1. I cloned the Container, which allowed me to make the container CT 101, then after creating it I made a new mount point with the same drive storage (900GB in this...
-
DDeakia reacted to gfngfn256's post in the thread [SOLVED] Help adding existing Volume to new container with Like.
AFAIK you have a few options here. Firstly attach that media drive & set it's PVE storage settings EXACTLY as it was previously. Then do ONE of the following: 1. Recreate an LXC with the same <ctid> as before (101) . I believe you will have to...
-
SScivaro replied to the thread GMKTec NucBox K11 - AMD 8945HS / 780M Windows 11 VM GPU Passthrough.[SOLVED] GMKtec NucBox K11 / AMD 8945HS 780M GPU Passthrough — Complete Working Solution After extensive debugging I got full AMD Radeon 780M (Phoenix3, 1002:1900) passthrough working on Proxmox 9.1.9 — including surviving Windows restarts...
-
JThose are on the cheaper and slower side of consumer SSDs. They will not perform well with sustained load and the primarily sync writes that Ceph does. The recommendation for enterprise SSDs with power loss protection (PLP) is there for good...
-
Jjdancer replied to the thread [SOLVED] Trying to enable nested virtualization results in perfomance loss on vm.I don't run nested virtualization using Windows guests but do with Linux guests especially with Proxmox, ie, phystical Proxmox -> vitual Proxmox -> Linux guest. I do use CPU type of 'host' as your screenshot shows. As for number of cores, I see...
-
Ggfngfn256 replied to the thread [SOLVED] Help adding existing Volume to new container.AFAIK you have a few options here. Firstly attach that media drive & set it's PVE storage settings EXACTLY as it was previously. Then do ONE of the following: 1. Recreate an LXC with the same <ctid> as before (101) . I believe you will have to...
-
Aalh replied to the thread Failed Backup to PBS damages VM.@Chris thanks for your speedy reply. i will test this the coming days.
-
Rryan.yaldor replied to the thread Whitelist DNSBL.FYI, the fix here is postfix service needs to be restarted after adding a new entry.
-
Rryan.yaldor replied to the thread Issue with whitelisting emails blocked by DNSBL sites.FYI, the fix here is postfix service needs to be restarted after adding a new entry.
-
Iivenae replied to the thread The domain is on a blacklist, but it still goes through..Theoretically you could add it with a block to senderaccess. But senderaccess is overwritten by proxmox regularly and you can only add whitelist domains via PMG Mailproxy -> Welcomelist You have to use the Mail Filter -> Who Object -> Blocklist...
