Latest activity
-
Ttotae posted the thread [SOLVED] Veeam Backup Issue with Offline VM on LVM ontop SAN in Proxmox VE: Installation and configuration.Hello, I am experiencing an issue when backing up an offline VM on SAN storage using LVM with Veeam. If the VM is online, the backup works normally. However, when the VM is powered off, the backup fails. There are two types of issues observed...
-
-
fiona replied to the thread [SOLVED] On a PVE system with the pve-qemu-kvm 11.0.0-1 package installed, virtual machines with the Hyper-V role added get stuck in a boot loop..Hi, thank you for the report! My colleague @driley also ran into the issue and is looking into it. -
Iio2345 reacted to Impact's post in the thread Kann Container aus Backup nicht zurückspielen: unable to restore CT - unable to detect disk size - please specify rootfs (size) with
Like.
Oder halt pct restore 100 XXX:backup/vzdump-lxc-100-... --rootfs YYY --storage ZZZ Du kannst den genauen Pfad via pvesm list ... und pvesm path ... finden. -
Rrothkraut replied to the thread Kein PXE-Boot bei UEFI Boot.Danke habe jetzt auch ewig danach gesucht. Danke!
-
Gghandalf reacted to NorViking's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Update: Root cause found — HPET clocksource, not kernel 7.0 After further investigation, the high CPU usage was not caused by kernel 7.0 itself, but by the HPET (High Precision Event Timer) being used as the system clocksource. Using perf top...
-
Dd.oishi replied to the thread How to do P2V.As ness1602 commented, I recommend Clonezilla . I also use Clonezilla when I do P2V. The basic usage is as described. Details are provided below. https://clonezilla.org/
-
Ddompro replied to the thread PBS parallel backups & PBS performance.Desktop PVE to my Testing-PBS: INFO: 92% (352.0 GiB of 382.0 GiB) in 51s, read: 2.0 GiB/s, write: 494.7 MiB/s INFO: 93% (355.3 GiB of 382.0 GiB) in 56s, read: 679.2 MiB/s, write: 679.2 MiB/s INFO: 94% (359.2 GiB of 382.0 GiB) in 1m 2s, read...
-
Ccasper134rus replied to the thread [SOLVED] pve-manager update/install stuck.А если нет кластера то как запустить процесс? Если запустить dpkg --configure -a то процесс висит и не чего не происходит # dpkg --configure -a Setting up pve-manager (9.1.9) ...
-
Mmohamed-ali reacted to Uturn's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
After ~27h everything looks fine and within normal ranges (journalctl, dmesg, Zabbix monitoring stats) Systems PVE: - AMD EPYC 9474F 48C (Zen4), DDR5 - AMD EPYC 7402p 24C (Zen2), DDR4 - Intel XL710 10G NICs VMs: mostly OpenBSD Linux Windows 10...
-
MMartin.B. replied to the thread Use Disk PassThrough or Raid-0 for PVE with Ceph (Testsystem).Thanks for your fast answers, looks like i will go this way and only use 2 of the hardware machines and build the ceph cluster virtual. The machines do only have 32GB RAM and an older 6 core CPU, so maybe using 2 hardware machines will be better...
-
Hello Think i found the issue a network cable was not plugged in all the way in the switch only barely made contact. so it had 10/100 but fluxuating so the switch STP was like hey sometings wrong. so that made the network do hickups. After the...
-
aaron replied to the thread Use Disk PassThrough or Raid-0 for PVE with Ceph (Testsystem).This is what we use for many internal tests, and also in the hands-on labs for our trainings. Good for functionality and behavior tests as long as performance is not a factor! -
aaron reacted to UdoB's post in the thread Use Disk PassThrough or Raid-0 for PVE with Ceph (Testsystem) with Like.
Sure! For teaching/learning/debugging this works great. Example: in my Homelab I have one specific cluster member with 64 GiB Ram and 2 TB local storage for VMs. I was able to create six virtual PVE nodes with 8 GiB Ram each, construct a...
-
CoolTux reacted to Impact's post in the thread Kann Container aus Backup nicht zurückspielen: unable to restore CT - unable to detect disk size - please specify rootfs (size) with Like.
Oder halt pct restore 100 XXX:backup/vzdump-lxc-100-... --rootfs YYY --storage ZZZ Du kannst den genauen Pfad via pvesm list ... und pvesm path ... finden. -
UdoB replied to the thread Use Disk PassThrough or Raid-0 for PVE with Ceph (Testsystem).Sure! For teaching/learning/debugging this works great. Example: in my Homelab I have one specific cluster member with 64 GiB Ram and 2 TB local storage for VMs. I was able to create six virtual PVE nodes with 8 GiB Ram each, construct a... -
CChimKenda replied to the thread Lattepanda Sigma Intel Raptor Lake iGPU Passthrough.root@Masternode:~# find /etc/modprobe.d/* -exec tail -n+1 {} + tail -n+1 /proc/cmdline /etc/kernel/cmdline /etc/default/grub lspci -vnnk | awk '/VGA/{print $0}' RS= ==> /etc/modprobe.d/blacklist.conf <== blacklist i915 blacklist intel_agp...
-
Vvaschthestampede replied to the thread Unexpected backup failures.Of course, I was able to do that immediately.
-
Ww3bdevil replied to the thread Weird prune retention problem on S3 sync job.Sync job runs at 01:45, after the regular backups have been run and verified. Local datastore prune has already been run at that point. I think I might have found the reason. Latest sync job has a row: 2026-05-08T01:45:53+03:00: [vm/104]: delete...
-
Kknut4linux replied to the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026!.Zu dieser Thematik habe ich auch noch etwas Senf. Dieses Thema ist wirklich verwirrend und ich trage hier mal meine Erkenntnis vor. Was hat es mit den RegistryKeys auf sich: Windows selbst kennt für sich nur 2 ligitime Wege, wie sich die...
-
Kknut4linux reacted to fabian's post in the thread nicht vergessen: UEFI-Zertifikate Eurer EFI-Disk Instanzen 06.2026! with Like.
der derzeitige shim ist nur mit dem "alten" microsoft key signiert (wie bei fast allen distros - microsoft signiert erst seit letztem herbst mit dem neuen key, und die review und submission prozesse sind langwierig), funktioniert out of the box...
