Wenn in der Übersicht „Legacy BIOS” steht, wie auf deinem Screenshot, dann ist Secure Boot für den Host definitiv nicht aktiviert.
Und wenn „pre-enrolled-keys=1” nicht zu finden ist, würde ich sagen, dass auch in den VMs kein Secure Boot aktiv...
Ich meinte die Einstellung für SecureBoot in dem BIOS meiner Fujitsu Kiste hier auf der der Proxmox Host läuft. Aber mit "Übersichtsseite" meinst Du ja vermutlich das
und wenn ja wäre meine Frage ja geklärt.
VG Jim
Thats great to hear! Thank you for the update.
If you edit your original post there should be a drop down near the subject to mark it solved. It makes the forum presentation more uniform (vs typing in prefix).
Cheers
Blockbridge : Ultra low...
Jo danke für die zusätzlichen Infos. Ich schaue mir das die Tage dann alles noch einmal in Ruhe an. Aktuell sehe ich bei mir jetzt auch nicht die dringende Notwendigkeit da jetzt spontan irgendetwas zu machen, ohne mir das nicht alles mal in Ruhe...
Wenn in der Übersicht „Legacy BIOS” steht, wie auf deinem Screenshot, dann ist Secure Boot für den Host definitiv nicht aktiviert.
Und wenn „pre-enrolled-keys=1” nicht zu finden ist, würde ich sagen, dass auch in den VMs kein Secure Boot aktiv...
Hello everyone! I have a Dell R620 with a PERC H310 Mini at a client's site, and when trying to install PVE9 I was unable to list the RAIDs. I tried with 8.1 and had the same problem, and finally with 7 it installed normally.
After that, I...
So I did try with kernel 7.0.0-3-pve included in PBS 4.2.0 (not the test one but did upgrade properly).
Still the same problem, crashed on the same steps, corrupted efi.
Had to chroot from a usb rescue system and restore uefi, pin 6.14 again...