Latest activity
-
JJohannes S reacted to DerekG's post in the thread Supported way for a NAS across multiple nodes that supports thin disks, snapshots, live migrations, move disks, and HA? with
Like.
The greatest mistake one can make is to try and forklift VMware into a Proxmox environment. You will forever be chasing your tail trying to get Proxmox to 'work' the same as VMWare. Start the process with a clean Proxmox install and then look... -
JJohannes S reacted to uzumo's post in the thread Supported way for a NAS across multiple nodes that supports thin disks, snapshots, live migrations, move disks, and HA? with Like.
Because it is a cluster file system like VMFS, multiple nodes can access the same disk. Since there is no such file system, multiple nodes cannot access the same disk. If that is a requirement, you can simply continue using VMware. *I have...
-
Jbecause that is how it works. as @leesteken already said, 7.0 is "just another new kernel", which happens to have a different major release number. the order is "test", then "no-subscription" and then eventually "enterprise" after enough feedback...
-
JFor the Linux kernel version 7.0 is not more special (or a bigger change) than 6.20 would be compared to 6.19. And the jump from 6.17 to 7.0 is similar to 6.14 to 6.17. PVE 9.x has indeed seen more than one kernel version already: 6.14, 6.17...
-
BFor the Linux kernel version 7.0 is not more special (or a bigger change) than 6.20 would be compared to 6.19. And the jump from 6.17 to 7.0 is similar to 6.14 to 6.17. PVE 9.x has indeed seen more than one kernel version already: 6.14, 6.17...
-
Oomgzwhitepeople replied to the thread Supported way for a NAS across multiple nodes that supports thin disks, snapshots, live migrations, move disks, and HA?.Thanks everyone for the comments. It seems the only way to get all the features above is to use NFS. Guess we will need to use NFS going forward. Seems that ZFS over iSCSI is a way to accomplish all the above, but the storage does not do ZFS, so...
-
Bbeisser replied to the thread kernel 7.0 and mainstream repo.because that is how it works. as @leesteken already said, 7.0 is "just another new kernel", which happens to have a different major release number. the order is "test", then "no-subscription" and then eventually "enterprise" after enough feedback...
-
Ddorinxev replied to the thread kernel 7.0 and mainstream repo.Which is what I did eventually, but my question - why no-subscription jumps a major kernel version? I can understand doing this on the test repo, but on no-subscription?
-
Hholmis reacted to fabian's post in the thread ERROR: online migrate failure - Failed to complete storage migration: block job (mirror) error: drive-efidisk0: Input/output error (io-status: ok) with Like.
you have different CPUs, so you can't (reliably) use cputype host and live migration - you need to either switch to a different CPU type, or use offline migration.
-
Rrex2020 replied to the thread Windows VM Freezing During Backup.I've just recently started backing up a couple of windows 11 PCs and this seems to be the case. The host will freeze for the whole backup. A couple of times the host will allow RDP login / password but will then never display the desktop and...
-
Bbeisser replied to the thread kernel 7.0 and mainstream repo.7.0 is the new default kernel on no-subscription, but you can easily pin an older kernel with the proxmox-boot-tool. the node will then boot with whatever kernel you pin until you remove the pin, even if a newer kernel is installed.
-
Kkoby replied to the thread Dns01 not working - SOLVED.Can anyone advice how to debug that please
-
Ddorinxev posted the thread kernel 7.0 and mainstream repo in Proxmox VE: Installation and configuration.Late friday I decided to upgrade my proxmox 9.1. I'm using the no-subscription repo, none of the nodes has test repo enables. Imagine my surprise when the update decided it's time to jump to kernel 7.0 and not remain on the 6.x At the moment...
-
FFellTarsier replied to the thread [SOLVED] intel x553 SFP+ ixgbe no go on PVE8.After figuring out I had a bad patch cable with my previous reply I've had no further problems. I'd be looking at the mikrotik switch. When I had one of those I had no end of issues with it behaving poorly.
-
Aa.woll replied to the thread [SOLVED] Nach Update auf v9.0.7 UI zerschossen. Ich bitte um Hilfe..Der Fehler ist im Inkognito_Fenster reproduzierbar.
-
Aa.woll replied to the thread [SOLVED] Nach Update auf v9.0.7 UI zerschossen. Ich bitte um Hilfe..Ich hoffe, der Screenshot hilft weiter: Ich probiere es mal im Inkognito-Fenster, fürchte aber, es könnte etwas tiefgreifenderes sein, weil ich soeben auf der Seite auch versucht habe, die DNS-Konfig so anzupassen, dass sie auf den lokalen...
-
-
Aa.woll reacted to ChrisTG74's post in the thread [SOLVED] Nach Update auf v9.0.7 UI zerschossen. Ich bitte um Hilfe. with Like.
Fliegen im Browser denn Fehler im Netzwerk-Trace? (Firefox: Shift + F5, dann Tab "Network" und Seite reloaden, beim Chrome muss man die "Developer Tools" über das Menü öffnen). Also 400er oder 500er Errors? In Zweifelsfall ist vielleicht einfach...
-
BBob@22 replied to the thread ASM2812 based dual NVME PCIe card and passthrough.ASM2812 is not a true PCIe switch It is a lane‑multiplexer, not a switch fabric It presents two NVMe devices to the OS But internally they share a single PCIe endpoint IOMMU groups get confused Passthrough exposes the same upstream device twice...
-
Ccarlitos009 posted the thread PROXMOX 8.3.0 hangs for no apparent reason in Proxmox VE: Installation and configuration.Four days ago my PVE was unresponsive. Noticed because my immich container in my virtualized TrueNas was not responding. I was unable to connect to the GUI and SSH was the same. I figured some power issue but my seconday pve and synology were...
-
-
Vvesalius replied to the thread [SOLVED] intel x553 SFP+ ixgbe no go on PVE8.Sorry, My intel SFP+ continue to work natively since Kernel 6.8.12 on through current 7.0. No manual or DKMS ixgbe build needed since then either. Have you triple checked the Microtik switch port settings to make sure that it’s not a network...
