Latest activity
-
Bbluesite replied to the thread Probleme mit apcupsd.also ich habe aktuell kernel 7.0.0-3-pve am Laufen und drei apc usv am Server, zwei davon sind für andere Rechner da bzw Geräte alle drei laufen hier ohne Probleme mit dem Kernel, habe auch apcupsd 3.14.14 2 mal Back-UPS XS 950U und eine Back-UPS...
-
Dd.oishi replied to the thread Error: Login failed. Please try again.Since I do not know the exact state of your cluster, I cannot advise a safe procedure. However, I believe the following documentation may be helpful. I recommend that you read the cautions and notes in the documentation carefully before...
-
JJohannes S replied to the thread Nesting - Proxmox within Proxmox - Complete private cloud.Incus und ProxmoxVE are both basically built around qemu/kvm for vms and lxc for containers. So I would expect that both have similiar capibalities, in fact nested virtualization and containers work on both with similiar caveats ( nested...
-
JJohannes S reacted to leesteken's post in the thread Nesting - Proxmox within Proxmox - Complete private cloud with
Like.
Can you share the blog? I wonder what they were talking about. -
JJohannes S reacted to leesteken's post in the thread Nesting - Proxmox within Proxmox - Complete private cloud with Like.
Where did you read that? AFAIK, there is nothing special about nesting VMs on Proxmox VE: https://pve.proxmox.com/wiki/Nested_Virtualization
-
FFiruz replied to the thread Error: Login failed. Please try again.I have already determined that the problem is a cluster remnant from the old cluster. Now I need to figure out how to remove it in the safest way. Since there are currently a lot of VMs on the server, it should be extremely risk-free.
-
WWeltherrscher replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Since the Upgrade to Kernel 7.0 and PVE 9.1.9, my VMs randomly hard shut down (aka they just switch off hard). E.g. in my Mailserver-VM I see the following errors in dmesg: [ 28.293199] ata9.00: Read log 0x10 page 0x00 failed, Emask 0x1 [...
-
-
Nnickwalt replied to the thread Nesting - Proxmox within Proxmox - Complete private cloud.Read it on a blog and couldn't see how this was possible so had to ask. Thanks. Looks like running LXC in a nested hypervisor will be performant enough for my requirements.
-
HHotdog reacted to Stubennerd's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Can you please put the outputs into code blocks? It's, at least for me, really exhausting to read.
-
UdoB reacted to Mudgee Host's post in the thread Proxmox onto of Debian install - instructions to engineers with Like.
ok, I think I might be pushing harder for a proxmox iso install. -
Dd.oishi reacted to uzumo's post in the thread Supported way for a NAS across multiple nodes that supports thin disks, snapshots, live migrations, move disks, and HA? with Like.
Because it is a cluster file system like VMFS, multiple nodes can access the same disk. Since there is no such file system, multiple nodes cannot access the same disk. If that is a requirement, you can simply continue using VMware. *I have...
-
Dd.oishi reacted to DerekG's post in the thread Supported way for a NAS across multiple nodes that supports thin disks, snapshots, live migrations, move disks, and HA? with Like.
The greatest mistake one can make is to try and forklift VMware into a Proxmox environment. You will forever be chasing your tail trying to get Proxmox to 'work' the same as VMWare. Start the process with a clean Proxmox install and then look...
-
Bbeisser reacted to Stubennerd's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Can you please put the outputs into code blocks? It's, at least for me, really exhausting to read.
-
JJohannes S reacted to Kingneutron's post in the thread Proxmox (as a company) - what the HELL are you doing? Kernel update to 7 broke networking IN A VM with Like.
FYI I upgraded my PBS VMs and a secondary PVE server today with no issues. Full backups beforehand. The problematic PBS VM was upgraded in-place from PBS v3 to v4 and apparently did not have the proxmox-network-interface-pinning .deb package...
-
JJohannes S reacted to omavoss's post in the thread [SOLVED] PBS hat Root-Passwort vergessen with Like.
Okay, hab meinen Fehler gefunden. Es gab ein LXC auf einer anderen physischen Proxmox-Maschine mit derselben IP-Adresse wie mein PBS, allerdings lauschte dieses LXC an einem anderen Port. Ich habe das korrigiert und nun läuft das BPS-GUI und...
-
JJohannes S reacted to Stubennerd's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Can you please put the outputs into code blocks? It's, at least for me, really exhausting to read.
-
JJohannes S reacted to IsThisThingOn's post in the thread Empfehlung für einen Neuling - Sicherung ein ca. 20 TB VM eines PVE auf einem PBS und anschließend auf Band with Like.
Nur weil etwas möglich ist, ist es noch lange nicht sinvoll. Aber ja, Server2 könnte mit HDD passtrough als VM laufen, sowie auch PBS3 eine VM sein könnte und auch Server4. Nur warum? Und warum all die negativen Konsequenzen in Kauf nehmen? Und...
-
JJohannes S reacted to UdoB's post in the thread [SOLVED] Best practice for Truenas virtualized on Proxmox with Like.
I cannot answer that as "it depends", sorry. On all of my PVEs the host handles (local) storage, exclusively. In my Homelab the largest storage (in the cluster) is served by an LXC container (not: VM) to some clients. The host owns the storage...
-
JIf you are only keeping a single backup then there is nothing to duplicate. Try keeping the last 3 days of backup, then you should see the dedupe working, but then you need to set your GC & prune correctly or your'll fill the Backup store...
-
TTarzoq reacted to somenoob's post in the thread [TUTORIAL] How to setup PBS as a VM in Unraid and uses Virtiofs to passthrough shares with Like.
Thank you for this guide! for future users using unraid 6.12.6 or newer: follow part one and go to part 2 - step 15 without creating the vm. All the xml configuration is done by default by selecting virtio as the unraid share after creating the...
