Latest activity
-
RRaphael11 reacted to Dunuin's post in the thread Feature Request: advanced restore options in GUI with
Like.
What I'm missing are more advanced options when restoring backups: 1.) a way to set the target storage for each individual virtual disk Right now you can only choose a single target storage and all virtual disks will be restored to that storage... -
IIsThisThingOn replied to the thread Empfehlung für einen Neuling - Sicherung ein ca. 20 TB VM eines PVE auf einem PBS und anschließend auf Band.Nur weil etwas möglich ist, ist es noch lange nicht sinvoll. Aber ja, Server2 könnte mit HDD passtrough als VM laufen, sowie auch PBS3 eine VM sein könnte und auch Server4. Nur warum? Und warum all die negativen Konsequenzen in Kauf nehmen? Und...
-
Okay, hab meinen Fehler gefunden. Es gab ein LXC auf einer anderen physischen Proxmox-Maschine mit derselben IP-Adresse wie mein PBS, allerdings lauschte dieses LXC an einem anderen Port. Ich habe das korrigiert und nun läuft das BPS-GUI und... -
Wwaltar reacted to ffischer's post in the thread VM Startet nicht mehr nach remote-migration with Like.
Nabend, also nun weiß ich da was. Falls jemand mal auf das gleiche kommt. LVM ist die Funktion mit Snapshots aktiv. Daher hat wohl qm remote-migrate das problem das das LVM normalerweise RAW Dateiformat der VMS hat. Ich mach das nun via vzdump...
-
Aanutrix reacted to andy_e's post in the thread PVE 7.4 + Home Assistant: Intel AX200 Bluetooth issues with Like.
I think I've finally solved this. Bluetooth on Home Assistant has survived several reboots where it would normally fail over 50% of the time. The errors in the `dmesg` output are all red herrings. Those errors are present even when it works. The...
-
Uuzumo reacted to NorViking's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available on test and no-subscription with Like.
Update: Root cause found — HPET clocksource, not kernel 7.0 After further investigation, the high CPU usage was not caused by kernel 7.0 itself, but by the HPET (High Precision Event Timer) being used as the system clocksource. Using perf top...
-
MMudgee Host posted the thread Proxmox onto of Debian install - instructions to engineers in Proxmox VE: Installation and configuration.Hi, My datacenter will need to install Debian for me before I can install proxmox. what instructions should I give them in regards to filesystems / partitioning. The host will have a pair of 1tb SSD and will need to use software raid. ie one...
-
Rrecursivedelete replied to the thread [SOLVED] intel x553 SFP+ ixgbe no go on PVE8.Has anyone continued to upgrade their kernel and/or Proxmox versions, and are your X533 ports continuing to work? I purchased a Qotom Q20300S9 Mini PC exactly a year ago but have only been using the RJ45 ports up until now. After trying the SFP+...
-
Bbitr0t replied to the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares.I switched my mounts/connections to SMB. I could not find any way to get it not crash the server every day.
-
Ddas1996 replied to the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares.Where are we with this now, nearly 2 months later?
-
Aanutrix reacted to openaspace's post in the thread Why containers doesn't show SLAAC IPv6 in the main information tab? with Like.
Hello. I have switched to only ipv6 containers and using SLAAC no ip is shown when the container is running in the main information tab. Why dowsn't show it? will really confortable to make a copy and paste from the statistic tab. thank you.
-
Mmasgo reacted to weppa's post in the thread [SOLVED] Proxmox VE 8 to 9 on OVH bare metal servers with Like.
@sbraz I think you're gonna have a "thanks" here from every OVH customer who updates their PVE8 to 9 in the next 10 months ... Thanks ! merci ! You should really think about making a proactive communication : EVERY single PVE8 customer is...
-
Mmasgo reacted to sbraz's post in the thread [SOLVED] Proxmox VE 8 to 9 on OVH bare metal servers with Like.
Hi, I work for OVHcloud on our OS images and I can indeed reproduce the problem on UEFI boot servers with PVE 8 installed on more than one disk with OVHcloud's installer. I'll first provide the solution and then explain why this issue occurs...
-
Mmasgo reacted to jf2021's post in the thread [SOLVED] Proxmox VE 8 to 9 on OVH bare metal servers with Like.
Hi. After struggling a little to upgrade from Proxmox 8 to 9 on bare metal servers hosted by OVH, I thought I'd explain how I succeeded. First of all, this is not a generic tutorial, this is just how I could solve my problem on my 2 servers (one...
-
BBonfra replied to the thread OCI Image fails to extract if the image relies on systemd.small update: after flattening the image with crane i now have this error: TASK ERROR: unable to create CT 100 - Error while extracting OCI image: IO error: failed to unpack...
-
Ccarles89 reacted to fiona's post in the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository with Like.
From the analysis until now, the IO pressure seems to be a cosmetic issue or rather accounting issue in the kernel. QEMU switched to using io_uring for event loops with QEMU 10.2. The issue appears in combination with IO threads, where a blocking...
-
Ccarles89 reacted to beisser's post in the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository with Like.
its like using debian sid and then complaining about issues with it. according to his logic debian sid should be qc-tested since the repository is available to thousands. thats not how it works. test = bleeding edge stuff with a decent chance...
-
Ccarles89 reacted to uzumo's post in the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository with Like.
Those expectations arise precisely because you’ve actually used it and experienced its shortcomings firsthand. I understand your concerns, but ultimately, the use of the test repository is at your own risk.
-
Ccarles89 reacted to beisser's post in the thread [SOLVED] Applying pve-qemu-kvm 10.2.1-1 may cause extremely high “I/O Delay” and extremely high “I/O pressure stalls”. (Patches in the test repository with Like.
i repeat, dont use the test-repo for production. developers state its only for testing-purposes and not for production-use as evidenced by my screenshot from their own wiki. you ignoring this is purely on you and on noone else. you could have run...