Latest activity
-
UdoB reacted to Onslow's post in the thread Problem with rsync mtime preservation since update to kernel 6.17.13-6-pve with
Like.
Hi, @skraw I wonder if you really mean atime... Though you wrote "atime" both in the subject and inside the post. But by default, rsync's decision whether to copy a file or not, doesn't depend on atime. It depends on mtime (and the size). From... -
WWichets replied to the thread [SOLVED] 2 Node cluster lost connection after new router install w/ IP Changes.of mine change new router and restart work fine,
-
WWichets reacted to EricL..'s post in the thread [SOLVED] 2 Node cluster lost connection after new router install w/ IP Changes with Like.
For anyone finding this: https://forum.proxmox.com/threads/solved-editing-corosync-conf-fail.163845/ The method in this post did the trick
-
Sskraw replied to the thread Problem with rsync mtime preservation since update to kernel 6.17.13-6-pve.Ok, to make the story a bit simpler. You are right, the problem turns around mtime. But you seem wrong about the rest. If I do an "ls -l"' on the source dir of the rsync I see some dates/times for every file. These are of course mtimes. If I do...
-
GGEF replied to the thread Issue when creating a firewall rule.Hello, proxmox-ve: 9.1.0 (running kernel: 7.0.0-3-pve) pve-manager: 9.1.9 (running version: 9.1.9/ee7bad0a3d1546c9) Got same problem...
-
SSeqway posted the thread PVE after time no longer available in Proxmox VE: Installation and configuration.Good day, i hope this is the right area to post. I have a Promox Cluster running with 3 nodes. Its running good and i have many LXC and VMs running. So far so good. With one node i have from time to time problems whyever. By random in time...
-
-
Mmichaels2408 replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Kernel 7.0.0-3 failing to boot. 6.17.13-6 boots fine. \ X10DRU-i + 512gb DDR4 ECC 2133 operating at 1600Mhz: all DIMM's are the same style and test fine. Grub Conf GRUB_DEFAULT=0 GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`( . /etc/os-release &&...
-
-
OOnslow replied to the thread Problem with rsync mtime preservation since update to kernel 6.17.13-6-pve.Hi, @skraw I wonder if you really mean atime... Though you wrote "atime" both in the subject and inside the post. But by default, rsync's decision whether to copy a file or not, doesn't depend on atime. It depends on mtime (and the size). From...
-
Ddigamman replied to the thread Pve unreachable after a powerloss autostart.Could it be the autostart off ?
-
-
Ddigamman replied to the thread Pve unreachable after a powerloss autostart.The cable is new out from box from legrand and a cat6a so i don’t think so but i’ll check it asap when i’ll be back at home
-
-
Please post the content of /etc/network/interfaces "nic0" is DOWN - usually this means that it has to connection to a switch. Check that cable; look for LEDs showing "Link" established - on both ends. Use another cable if that fails. ... ... -
Bblueman replied to the thread Empfehlung für einen Neuling - Sicherung ein ca. 20 TB VM eines PVE auf einem PBS und anschließend auf Band.Server 3 ist eine separate physische Maschine + Bandlaufwerk. Können Server 2 und 4 VMs werden, damit alles mit dem PBS gesichert werden kann.
-
UdoB replied to the thread Pve unreachable after a powerloss autostart.Please post the content of /etc/network/interfaces "nic0" is DOWN - usually this means that it has to connection to a switch. Check that cable; look for LEDs showing "Link" established - on both ends. Use another cable if that fails. ... ...
-
IThat's mainly for legal reasons so not comparable. Also zfs isn't just a one-man-show and has multiple comanies funding development and is mature enough not to loose data. In contrast bcachefs developer Kent Overstreet wanted to violate kernel...
-
IAnd this is unlikely to change since the main developer of bcachefs has shown that he isn't able to conform to the kernel developers workflow: https://www.phoronix.com/news/Bcachefs-Removed-Linux-6.18 This is imho a large red flag why I...
-
IIsThisThingOn replied to the thread Empfehlung für einen Neuling - Sicherung ein ca. 20 TB VM eines PVE auf einem PBS und anschließend auf Band.Server1: PVE für VMs. Server2: TrueNAS oder OMV ZFS für Daten Server3: PBS für Backups der PVE VMs Server4: ZFS destination für ZFS von Server2 Dann noch Server2 und Server3 mit S3 Backup ergänzen.
-
Aakanealw replied to the thread terminal slow to log in after upgrade from pve 8 to 9 / pbs 3 to 4.Update: I ended up reinstalling proxmox ve only on server1. it's had the same installation going back to v7 or maybe v6 so it was time for a clean install. I won't be reinstalling pbs on server1, I'm going to do a clean install on server2 of pbs...
-
Wwhostolemyname replied to the thread UID/GID mapping between host and lxc.Hi Lucas, thank you for sharing your thoughts. It seems, that the first approach (chown lxc-id_as_seen_from_host:lxc-id_as_seen_from_host /shared/directory/on/host -R) is "officially allowed" and not breaking the security mechanism of the...
-
Mmatt69 reacted to Fabry71's post in the thread Opt-in Linux 6.17 Kernel for Proxmox VE 9 available on test & no-subscription with Like.
The patch here published: https://www.reddit.com/r/Proxmox/s/cYmX4PKxgX (The patch code is duplicated, take only the first half) makes version R535 v16.12 compatible with kernel 6.17 (I personally tested it and it works). Then versions 16.13 and...
-
Jjbeck66 replied to the thread Probleme mit apcupsd.Moin, derartige Überlegungen hatte ich auch schon gemacht. Ich nutze für Proxmox drei kleine Server und könnte dafür auch einen vierten benutzen. Oder ich könnte mich mit NUT beschäftigen. Aber das behebt alles die Ursache nicht und das wäre...
