Latest activity
-
news reacted to gfngfn256's post in the thread rescue advice needed - recover info from VM - HowTo? with
Like.
Restore it from the backup you have / should have. -
Zzed85 replied to the thread [SOLVED] PVE upgrade 8 to 9 - proxmox-boot-uuids - systemd-boot meta-package installed.I did run pve8to9 --full Any more info I can deliver to check what I need to do?
-
KKurgan replied to the thread Updated to 8.2 - DMA error.Yes, I can confirm the issue is still there (and will never go away, it's an issue with older hardware) and that if you add the intel_iommu=off during installation, then the installer adds it to the installed GRUB so no need to re-add it.
-
KI just did an install of 9.1 on a T610. To do the install, I had to press e when "Install Proxmox (Graphical)" was selected, then add intel_iommu=off to the end of the "linux /boot/linux26" line, and press F10 to get it booting using that...
-
MMarkusKo replied to the thread Secure Boot – Microsoft UEFI CA 2023 Certificate Not Included in EFI Disk.On Windows Server you *have* to do this manually, just adding the updated efi disk in PVE is not enough, the Windows Server boot loader has to be updated as well. Set registry key...
-
MMarkusKo reacted to Falk R.'s post in the thread [SOLVED] Installation aktuelle PVE9 ISO auf PRIMERGY RX2540 M8 mit PDUAL CP300 bleibt bei 99% hängen with Like.
Das bitte nicht tun, die Abgespeckten Controller für die OS NVMe laufen nur richtig rund, wenn die brav ihr Raid1 behalten. Dann einfach den PVE mit ext4 darauf installieren, das funktioniert immer wunderbar.
-
TTrevorW replied to the thread [SOLVED] PVE upgrade 8 to 9 - proxmox-boot-uuids - systemd-boot meta-package installed.@zed85 https://forum.proxmox.com/threads/pve-8-to-9-in-place-upgrade.170013/ discusses the update process including removing systemd-boot. (BTW I didn't have to do this but ran into my own problems - have an ISO USB to boot into rescue mode on...
-
Jno the location has not moved, can you please post the output of pvesm status and ls -l /var/lib/vz/template/iso
-
Ggfngfn256 replied to the thread rescue advice needed - recover info from VM - HowTo?.Restore it from the backup you have / should have.
-
MMarkku replied to the thread issue with Keyfactor EJBCA appliance.In the Deploy on KVM documentation it talks about some XML file. Maybe look inside it to see if it contains some network-related information? In any case, you could try capturing traffic (tcpdump) from the PVE tap interface to see if there is...
-
fba reacted to bbgeek17's post in the thread Recommendation for software-defined storage for Proxmox on OVH (with Veeam snapshot integration) with Like.
Veeam's ability to utilize backend storage snapshot functionality to offload the backup workflow is limited to Vsphere. The Veeam PVE plugin integrates with PVE by hooking into primary QEMU process, somewhat similar to how PVE&PBS work (but not... -
Kkrowle posted the thread issue with Keyfactor EJBCA appliance in Proxmox VE: Networking and Firewall.Dear all, i have a couple of EJBCA appliances to setup on proxmox for a PKI infrastructure. They are on different subnets and SDNs. I'm following this exact procedure...
-
OOnslow replied to the thread [SOLVED] PBS 4 upgrade on a Dell NX3230, doesn't fully boot..Welcome, @nd-2999 You can try adding nomodeset And removing quiet (removing quiet won't remove the reason of the issue but more output may show some hints). Whether the issue is related to that idrac error - I don't know.
-
Ghttps://forum.proxmox.com/threads/proxmox-virtual-environment-security-advisories.149331/post-850782 If you run apt autoremove, this is what will be left over: https://forum.proxmox.com/threads/clean-old-kernels.42040/post-257792 If you want...
-
CCRCinAU replied to the thread ACME nsupdate seems to be broken in VE 9.1.9?.Ah - I should note that when I unblocked the IPv6 access to the master DNS server, everything worked as it should - so this issue is purely around the fallback to IPv4 address.
-
CCRCinAU posted the thread ACME nsupdate seems to be broken in VE 9.1.9? in Proxmox VE: Installation and configuration.Trying to get a Let's Encrypt cert via the ACME nsupdate plugin and it's failing with FORMERR. TSIG key works fine if I run nsupdate by hand against the same server, so it's not an auth or ACL issue. Versions: libproxmox-acme-perl...
-
TTarbouif replied to the thread [SOLVED] PMG repositories issue.OK ! Done ! Thank's a lot
-
EEricmann replied to the thread Verification "error" 500 Internal Server Error on S3 datastore.That’s a valid concern, especially with VMs at that scale. A full retry on a 12TB VM consuming bandwidth for days isn’t ideal. Hopefully, the planned implementation will be more granular rather than restarting the entire verify job. Chunk-level...
-
Nnitocris replied to the thread RTX 5080 (Blackwell GB203) VFIO Passthrough Failing on PVE 9.1 / Kernel 6.17 — Has Anyone Solved This?.Do you have any update for this patch ?
-
Zzed85 replied to the thread [SOLVED] PVE upgrade 8 to 9 - proxmox-boot-uuids - systemd-boot meta-package installed.When I run pve8to9 I get the following info: = CHECKING VERSION INFORMATION FOR PVE PACKAGES = Checking for package updates.. WARN: updates for the following packages are available: proxmox-kernel-6.8, proxmox-kernel-6.8.12-22-pve-signed...